32 Resultados para: "LABCONCO CORPORATION"

Supplier: LABCONCO CORPORATION

Standard cabinets support Labconco® laboratory hoods and can be used for storage of small laboratory instruments. Cabinets are constructed of white epoxy-coated steel and include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall. Available in six widths and two heights. Single-door models can be ordered with left or right hinge opening.

Supplier: LABCONCO CORPORATION

Logic Cart fits under any telescoping base stand. Features three small and one large compartments, one drawer, front panel cut out for dispensing wipers or gloves, and HDPE worksurface. W×D×H: 635×483×686 mm (25×19×27").

Supplier: LABCONCO CORPORATION

Molded from special formulation of epoxy resins to withstand chemicals. Dished and contoured to conform the interior liner of 0.9m (3ft.) Protector* XVS Ventilation Station to contain spills. Radiused front edge enhances containment.

Supplier: LABCONCO CORPORATION

Safely store and vent solvents and other highly flammable liquids. Dual-wall white epoxy-coated steel construction with 3.8cm (1¹/₂") air gap for complete protection. Equipped with three-point locking handle, rear vent outlets with flame arresters and closure plugs, dished epoxy-coated steel shelf, and leveling legs. Include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall.

Supplier: LABCONCO CORPORATION

These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Supplier: LABCONCO CORPORATION

Provides a non-ventilated, circulation-free work area designed to reduce cross-contamination during polymerase chain reaction (PCR) experiments. The unit is constructed of UV-resistant, glacier white, dry powder epoxy-coated aluminum and steel with 0.6cm (¹/₄") tempered safety glass sash and sides. Angled, hinged sash features a 19.8cm (7¹³/₁₆") high opening for closer, more comfortable viewing than vertical sashes, and an interlocked UV protection panel that must be in place to turn on UV light but can be removed when the light is off for full access to enclosure opening.

Supplier: LABCONCO CORPORATION

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, and Protector Radioisotope laboratory hoods. Base stands are constructed of durable 4.5cm (13/4") tubular, glacier white epoxy-coated steel and support loads up to 453.6kg (1000lbs.). ADA-compliant. Stands with telescoping legs are adjustable from 69.9–85.1cm (27¹/₂–33¹/₂") high. Hydraulic lift base stands adjust from 64.8–85.1cm (25¹/₂–33¹/₂") high and include four powder-coated, die-cast feet with levelers. Manual hydraulic lift models include front-accessible hand crank. Electric hydraulic lift models include a front-accessible up/down switch.

Supplier: LABCONCO CORPORATION

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures

Supplier: LABCONCO CORPORATION

Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® Premier® Fiberglass Hoods feature left and right-sided GFCI duplexes and Labconco's signature one-piece molded fiberglass reinforced polyester liner that provides superior corrosion and chemical resistance and durability. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector Premier to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: LABCONCO CORPORATION

One 8" filler panel is included with each storage cabinet to extend cabinet depth to 30" and to enclose the utility chase behind the cabinet.

Supplier: LABCONCO CORPORATION

For 15.2cm I.D. hose. An accessory for use with XPert* Balance Enclosures, Protector* XVS Ventilation Stations, and Protector Workstations.

Supplier: LABCONCO CORPORATION

Fiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres.

Supplier: LABCONCO CORPORATION

Black solid epoxy, 48inch w x 30inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.

Supplier: LABCONCO CORPORATION

REDISHIP Purifier logic+ class II A2 biosafety cabinets use the same ECM blower technology as the Purifier Logic®, the Logic+ and use the constant Airflow Profile™ (CAP) to maintain a precise volume of air as the filters load.

Supplier: LABCONCO CORPORATION

Molded from special formulation of epoxy resins to withstand chemicals. Dished and contoured to conform the interior liner of 0.6m (2ft.) Protector* XVS Ventilation Station to contain spills. Radiused front edge enhances containment.

Supplier: LABCONCO CORPORATION

Black solid epoxy, 72inch w x 36inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.

Supplier: LABCONCO CORPORATION

This ventilated work area is ideal as a weighing station, light-duty fume hood, science classroom workstation, solvent cleaning work bay, or for veterinary pathology and cytology. Even, inward airflow protects the operator and contains hazardous or noxious fumes, vapors, and fine powders.

Supplier: LABCONCO CORPORATION

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® XStream® Fiberglass Hoods feature left and right-sided GFCI duplexes and provides excellent containment and energy savings. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector® XStream® hood to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION

TAPONA FOR VENTILATION

Supplier: LABCONCO CORPORATION

GABINETE 10 EN HOJA ABIERTA 66.3X31.2X89

Supplier: LABCONCO CORPORATION

SPILLSTOPPER SUPERFICIE DE TRABAJO 5FTX3

Supplier: LABCONCO CORPORATION

SUPERF. DE TRABAJO FENOLICA

Supplier: LABCONCO CORPORATION

TECHO CERRADO 31.7IN D 6FT W

Supplier: LABCONCO CORPORATION

FILTRO HEPA DE 4 PIES CAJA ESCAPE DE 50

Supplier: LABCONCO CORPORATION

VENTILADOR REVESTIDO ACERO 115V 10 EN SA

Supplier: LABCONCO CORPORATION

GABINETE 6FT PURIFICADOR 78.3X31.2X89.2I

Supplier: LABCONCO CORPORATION

FILTRO HEPA DE 4 PIES CAJA SUMINISTRO EN

Supplier: LABCONCO CORPORATION

CUBIERTA CUPSINK RESINA BK 7.44X4.44X0.3

Supplier: LABCONCO CORPORATION

SPILLSTOPPER SUPERFICIE DE TRABAJO 5FTX3