Supplier: CONTEC, INC. MX

PROSAT® meltblown polypropylene wipes offer exceptional cleanliness suitable for use in a wide variety of critical environments. Saturated with a solution of 70% USP grade isopropanol and 30% deionized water, the wipes provide a uniform and consistent application of the solution to the surface. PROSAT® PS-911 and PROSAT® PS-850 wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

These sealed-edge wipers offer an extremely high sorptive capacity and are designed for critical sterile environments.

Supplier: CONTEC, INC. MX

Absorbent cellulose/polyester wipers are made from strong, durable, hydroentangled nonwoven fabric with low levels of particles and extractables. The most absorbent wiper in terms of weight-to-capacity ratio. Excellent for less critical, nonabrasive applications. Ideal for wipe down of products prior to introduction to cleanroom. Lot-numbered for traceability.

Supplier: CONTEC, INC. MX

Amplitude™ Epsilon™ Wipes are made of a special grade blue cellulose and polyester hydroentangled to form a wipe with improved cleanliness and excellent sorbency.

Supplier: CONTEC, INC. MX

Amplitude™ Zeta™ wipes are a 5-ply, thermally bonded wipe which is comprised of a layer of cellulose sealed between two layers of meltblown polypropylene. This creates a material which is very absorbent and has a high level of cleanliness.

Supplier: CONTEC, INC. MX

Specifically designed for the biotech, pharmaceutical, medical device, and electronics industries. Highly sorbent, nonwoven polyester/cellulose blend wipers feature contamination control fabric by DuPont™. Wipers have low levels of particles and extractables. Apertured surface texture promotes effective cleaning and particle removal. Compatible with ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments. Lot-numbered for traceability.

Supplier: CONTEC, INC. MX

Anticon® Gold Sorb™ is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics.

Supplier: CONTEC, INC. MX

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: CONTEC, INC. MX

Made from high-quality, unlaundered 100% continuous filament polyester. Processed with unique technology for maximum cleanliness and excellent absorption properties. Low-linting wipers for use in less critical applications, such as rugged cleaning that requires tear- and abrasion-resistance. Suitable for hybrid electronics. For use in ISO Class 7 (FED-STD-209E Class 10,000/M5.5) environments. Stacked.

Supplier: CONTEC, INC. MX

For general-purpose cleaning in ISO Class 3 (FED-STD-209E Class 1/M1.5) environments. Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment.

Supplier: BERKSHIRE CORPORATION MX

Ideal for absorbing spills of solvents and deionized water in the cleanroom. Also for general surface and equipment cleaning. Nonwoven wipers are made from a polyester/cellulose blend of superior strength and absorbency, with low levels of ions and organic extractables. Made without binders or surfactants, resulting in a pure wiper. Suitable for ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: CONTEC, INC. MX

Polywipe-C heatseal wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe.

Supplier: CONTEC, INC. MX

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec® offers.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

For general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments. Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment.

Supplier: CONTEC, INC. MX

Amplitude™ Theta™ Wipes are made from a lightweight hydroentangled cellulose/polyester, which creates an economical absorbent wipe ideal for general cleaning applications.

Supplier: BERKSHIRE CORPORATION MX

MicroSeal SuperSorb® Lite are high absorbency 100% continuous filament polyester knit wiper.

Supplier: CONTEC, INC. MX

Amplitude™ Lambda™ Wipes are a hydroentangled blend of 58% cellulose and 42% polyester. The Lambda™ wipe is highly sorbent, has excellent durability, and good cleanliness.

Supplier: CONTEC, INC. MX

Premoistened polyester wipes are designed for general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: FOAMTEC INTERNATIONAL, LLC.

These soft, nonabrasive wipers trap particulate matter in a skeletal structure designed to reduce particulate contamination.

Supplier: VELTEK ASSOCIATES, INC. MX

Process2Wipes are saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Texwipe

POLYSAT® wipers are made from 100% polypropylene and pre-wetted with 70% IPA.

Supplier: Texwipe

Ideal for cleaning computer and electronic equipment.

Supplier: BERKSHIRE CORP

Bonded 2-ply, 100% knitted polyester wipers feature superior absorbency with a high level of cleanliness and durability.

Supplier: Texwipe

Two-ply double-knit 100% continuous-filament polyester wipers offer high sorbency performance. All four edges are thermally sealed, forming a border to prevent particle and fiber release. Suitable for use in ISO Class 3 (FED-STD-209E Class 1/M1.5) environments. To reduce particulation, wiper TWTX1050 is Vectra processed and wiper TW-TX1052 is laundered in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom.

Supplier: BERKSHIRE CORP

Ideal for absorbing spills of solvents and deionized water in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments. Also suitable for general surface and equipment cleaning. Nonwoven wipers are made from a blend of 45% polyester and 55% cellulose with superior strength and absorbency — wipers are able to absorb four times their own weight. Manufactured without binders or surfactants. Proprietary treatment enhances cleanliness by reducing particle generation. Low levels of ions and organic extractables.

Supplier: Texwipe

Ideal for critical environments where low particulate levels and high absorbency are required. Wipers are constructed of a clean, strong, hydroentangled blend of 45% polyester and 55% cellulose. This combination provides the high absorbency of a natural fiber with the strength of a synthetic fiber. Wipers are also treated with an ultra-low particle finish that gives the wipers significantly lower particle generation. The finish is nonionic and doesn’t extract into commonly used solvents. Suitable for use in ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments.

Supplier: Texwipe

An excellent choice for critical environments where the characteristics of foam are desired and low particulation is essential.

Supplier: Texwipe

This sealed-border knitted polyester wiper with excellent absorbency is ideal for meeting your most stringent production environment needs.

Supplier: Texwipe

These 100% knitted wipers are made from continuous-filament polyamide fiber in a double-knit, no-run, interlock construction.