Buscaste: Toallitas para salas limpias

Supplier: VWR International

Excellent for cleaning rough, abrasive or irregular surfaces, yet soft enough for delicate surfaces. Use these 100% interlock knit polyester wipers where low particle and fiber contamination are most critical. Appropriate for use in electronic, semiconductor, aerospace, pharmaceutical, medical device, research, and education industries. No-run interlock knit provides durability for vigorous cleaning. Edges are sealed for reduced lint and fiber. Laundered in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom to further reduce particulate and extractable contaminants.

Supplier: VWR International

These nonwoven wipers are suitable for use in critical environments, for absorbing spills of water and most common solvents, and for tasks such as cleaning laminar flow benches. Hydroentangled blends produce durable wipers that pick up liquids quickly. Low extractables and metallic ions make these wipers good for use where chemical purity is of prime importance. Spec-Wipe® 3 wipers are made from a blend of 45% polyester and 55% cellulose fibers. Spec-Wipe® 3e wipers are made from a creped fabric that is a blend of 46% polyester and 54% cellulose fibers. The creped fabric provides extra softness and bulk.

Supplier: VWR International

These Spec-Wipes are designed for cleaning laminar flow benches, cleanroom surfaces, and general process equipment.

Supplier: VWR International

Premoistened wipers are designed for environmentally sensitive areas, and are ideal for wiping optical parts, delicate glassware, electrodes, cuvettes, microscopes, and lenses.

Supplier: VWR International

Made from a hydroentangled blend that combines the strength and cleanliness of synthetic polyester with the high absorbency of cellulose. These soft, economical wipers are designed for cleaning surfaces and controlling spills in ISO Class 6 (FED-STD-209E Class 1000/M4.5) and less critical environments. Blend contains 45% polyester and 55% cellulose. No chemical binders. Knife-cut edges. Color: white.

Supplier: VWR International

Durable wipers resist fiber release and abrasion under rigorous use, even when wiping rough surfaces. Made from 100% virgin-grade, continuous-filament polyester in a double-knit, no-run interlock pattern to provide maximum cleanliness and absorbency. Laser cut wipers with sealed edges limit particles and fibers to an absolute minimum, ensuring excellent performance in environments that demand low levels of contaminants. Designed for cleaning surfaces and controlling spills in ISO Class 3 (FED-STD-209E Class 1/M1.5) or less critical environments.

Supplier: VWR International

Made of 100% double-knit polyester, delivering softness, high absorbency, strength, and abrasion resistance. Continuous-filament construction fortifies the fabric against breakdown. Textured yarn construction and clean-cut edges result in less linting and snagging. A proprietary cleaning process reduces particulates and extractable contaminants. Laundered in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom. Flat packed.

Supplier: VWR International

Sterile wiper has superior quality for aseptic environments where bacteria, particulate, and extractable levels are critical concerns.

Supplier: VWR International

These Spec-Wipes are excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces.

Supplier: BERKSHIRE CORPORATION MX

Durable, 100% knitted polyester wipers for general cleaning purposes, spill pickup, and equipment cleaning. Continuous-filament, no-run construction offers resistance to chemicals and abrasion. Low extractables, with extremely low particle and fiber generation. For use in ISO Class 4 (FED-STD-209E Class 10/M2.5) environments. Manufactured and tested with strict adherence to quality assurance guidelines. Laundered and packaged in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom.

Supplier: BERKSHIRE CORPORATION MX

Well-suited to optical applications and use on other sensitive surfaces, these all-purpose wipers are an economical midpoint between nonwoven materials and laundered synthetic wipers. Wipers are made of durable, yet nonabrasive 100% double-knit polyester. They are low in particle generation and extractables, making them useful in applications that would abrade or shred a nonwoven material. Recommended for ISO Class 5 (FED-STD-209E Class 100/3.5) environments.

Supplier: BERKSHIRE CORPORATION MX

SatPax® wipers provide a convenient combination of solvent and wiper that improves the cleaning process.It resolves safety issues associated with storage, mixing, and dispensing of solvents.

Supplier: CONTEC, INC. MX

The SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester creating highly sorbent and durable wipe.

Supplier: CONTEC, INC. MX

Premoistened knitted polyester wipers and nonwoven polypropylene wipers are saturated with various solvent blends.

Supplier: CONTEC, INC. MX

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: CONTEC, INC. MX

These sealed-edge wipers offer an extremely high sorptive capacity. Two layers of quilted polyester fabric are laser-cut and sealed together to create pockets where additional fluid can be trapped. This chemical- and abrasion-resistant wiper is ideal for general purpose cleaning and disinfectant application. Compatible with ISO Class 3 and 4 (FED-STD-209E Class 1/M1.5 and 10/M2.5) cleanrooms. Sterile wipers are gamma-irradiated to a Sterility Assurance Level of 10^-6. HexaWipe™ wipers have six heat-sealed edges. Hexagonal shape readily distinguishes critical-use wipers from other, noncritical-use wipers.

Supplier: BERKSHIRE CORPORATION MX

Ultrasonically sealed edge for reduced fiber contamination.

Supplier: CONTEC, INC. MX

Anticon® Gold HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. They use patented textile technology to achieve superior sorption characteristics for critical applications.

Supplier: CONTEC, INC. MX

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: CONTEC, INC. MX

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

Anticon® White Magic™ Wipes are made from 100% continuous filament polyester with an interlock knit construction. This wipe exhibits low particle and fiber counts and provides ultra-clean wiping for critical applications.

Supplier: CONTEC, INC. MX

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: CONTEC, INC. MX

PROSAT® meltblown polypropylene wipes offer exceptional cleanliness suitable for use in a wide variety of critical environments. Saturated with a solution of 70% USP grade isopropanol and 30% deionized water, the wipes provide a uniform and consistent application of the solution to the surface. PROSAT® PS-911 and PROSAT® PS-850 wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: CONTEC, INC. MX

Anticon® Gold Sorb™ is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics.

Supplier: CONTEC, INC. MX

Specifically designed for the biotech, pharmaceutical, medical device, and electronics industries. Highly sorbent, nonwoven polyester/cellulose blend wipers feature contamination control fabric by DuPont™. Wipers have low levels of particles and extractables. Apertured surface texture promotes effective cleaning and particle removal. Compatible with ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments. Lot-numbered for traceability.

Supplier: CONTEC, INC. MX

Made from high-quality, unlaundered 100% continuous filament polyester. Processed with unique technology for maximum cleanliness and excellent absorption properties. Low-linting wipers for use in less critical applications, such as rugged cleaning that requires tear- and abrasion-resistance. Suitable for hybrid electronics. For use in ISO Class 7 (FED-STD-209E Class 10,000/M5.5) environments. Stacked.

Supplier: CONTEC, INC. MX

Absorbent cellulose/polyester wipers are made from strong, durable, hydroentangled nonwoven fabric with low levels of particles and extractables. The most absorbent wiper in terms of weight-to-capacity ratio. Excellent for less critical, nonabrasive applications. Ideal for wipe down of products prior to introduction to cleanroom. Lot-numbered for traceability.