You searched for: Toallitas

Supplier: CONTEC, INC. MX

Anticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec® offers.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: CONTEC, INC. MX

These sealed-edge wipers offer an extremely high sorptive capacity. Two layers of quilted polyester fabric are laser-cut and sealed together to create pockets where additional fluid can be trapped. This chemical- and abrasion-resistant wiper is ideal for general purpose cleaning and disinfectant application. Compatible with ISO Class 3 and 4 (FED-STD-209E Class 1/M1.5 and 10/M2.5) cleanrooms. Sterile wipers are gamma-irradiated to a Sterility Assurance Level of 10^-6. HexaWipe™ wipers have six heat-sealed edges. Hexagonal shape readily distinguishes critical-use wipers from other, noncritical-use wipers.

Supplier: BERKSHIRE CORPORATION MX

Ultrasonically sealed edge for reduced fiber contamination.

Supplier: CONTEC, INC. MX

Anticon® Gold HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run interlock construction. They use patented textile technology to achieve superior sorption characteristics for critical applications.

Supplier: CONTEC, INC. MX

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: CONTEC, INC. MX

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

Anticon® White Magic™ Wipes are made from 100% continuous filament polyester with an interlock knit construction. This wipe exhibits low particle and fiber counts and provides ultra-clean wiping for critical applications.

Supplier: CONTEC, INC. MX

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: BERKSHIRE CORPORATION MX

Ultrasonically sealed edge for reduced fiber contamination.

Supplier: KIMBERLY-CLARK CORP (WIPERS)

Low-linting wipers for ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom assembly operations, pharmaceutical operations, and other clean environments.

Supplier: CONTEC, INC. MX

SterileSorb™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent with excellent durability and good cleanliness. SterileSorb™ wipes are strong and durable wet or dry, making them excellent for use in general cleaning and spill pick up.

Supplier: CONTEC, INC. MX

Amplitude™ Sigma™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent, offering excellent durability and good cleanliness.

Supplier: CONTEC, INC. MX

These PROSAT® sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT® Sterile Sigma™ wipes offer a soft and durable wipe providing consistent solvent application.

Supplier: CONTEC, INC. MX

SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

For general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments. Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment.

Supplier: KIMBERLY-CLARK CORP (WIPERS)

Highest-capacity towel in the market. More towels, same space, less time. Made with ABSORBENCY POCKETS™ for a soft and absorbent performance to handle tough spills and clean-up. Elemental chlorine-free (EFC) bleaching; packaging reduction through providing greater feet per case and 25% more towels on each core (compared to 800' roll towels). Meets EPA standards with a minimum of 40 % post-consumer waste content; 40% post-consumer waste; 60% recycled fiber. FSC & EcoLogo Certified. Rolls measure 1.5" core diameter and 7.87" roll diameter.

Supplier: FOAMTEC INTERNATIONAL, LLC.

These soft, nonabrasive wipers trap particulate matter in a skeletal structure designed to reduce particulate contamination.

Supplier: VELTEK ASSOCIATES, INC. MX

Process2Wipes are saturated with 70% USP isopropyl alcohol and 30% USP water for injection.

Supplier: Bel-Art Products, a Part of SP

Use these high-quality, lint-free tissues to quickly and easily clean glass and plastic lenses.

Supplier: Bel-Art Products, a Part of SP

Remove stubborn residue on glassware with this odor-resistant, highly absorbent sponge.

Supplier: 2 D 2 S.A. DE C.V. MX

Embossed towels are great for drying face and hands.

Supplier: EASY BRAID CO TE

This sponge is exclusively designed for the electronics industry, the soaker removes oxides and excess solders.

Supplier: SKYWILL FAR EAST INDUSTRIES

Sponges

Supplier: DISTRIBUTION RESULTS, INC.

Highly absorbent, durable sponges for general laboratory cleaning.

Supplier: MICROCARE CORP.

This is an excellent benchtop wipe sized for the rework bench and a perennial MicroCare best-seller.

Supplier: MICROCARE CORP.

This is the premier, highest-quality general purpose stencil wipe in the industry.

Supplier: MIDLAND PAPER & PACKAGING TE

Antistatic foam made of polyethylene material.

Supplier: CONTEC, INC. MX

Disposable Premira II Microfiber HighDuster Covers reduce fiber shedding and provide effective dry and damp dusting for hard to reach areas. The microfiber fabric offers excellent pickup power and is compliant with most cleaning protocols. Compatible with the flexible foam Snake Duster.