70 Results for: "Labconco"

Supplier: Labconco

Safely store and vent acids and other highly corrosive liquids. Cabinets are constructed of durable white epoxy-coated steel with corrosion-resistant polyethylene interior liner. Equipped with leveling legs and rear vent connection cutouts for venting the cabinet into a laboratory hood. Include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall.

Supplier: Labconco

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: Labconco

Wash rings are suitable for use in perchloric acid duct systems.

Supplier: Labconco

PVC exhaust duct is Type 1, unplasticized, schedule 40, lightweight, and corrosion-resistant

Supplier: Labconco

SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins

Supplier: Labconco

Evaporator, Centrifugal, Block for RapidVap® Vertex™ Dry Evaporator, Labconco

Supplier: Labconco

Most items are made of Type 304 stainless steel

Supplier: Labconco

Fast-Freeze® flasks for FreeZone® Freeze Dry Systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: Labconco

The DNA centrifugal concentrator has all of the features of the CentriVap® benchtop concentrators (see 89004-916 series) with the addition of a DNA rotor that accommodates up to sixty 1.5mL and 2.0mL tubes or seventy-two 0.5mL tubes

Supplier: Labconco

Glove Box Base Stand with Fixed Feet

Supplier: Labconco

PVC elbows, both 45° and 90°, are compatible with thermoplastic duct

Supplier: Labconco

Replacement glassware kit for FreeZone® freeze dry systems.

Supplier: Labconco

The newly redesigned, patented Protector® XStream® Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream® easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate when tested at 4.0 lpm at OSHA-recognized 60 fpm face velocity.

Supplier: Labconco

Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods. Surfaces are black in color and have a depth of 76.2cm (30") and a thickness of 3.2cm (1¹/₄").

Supplier: Labconco

Glove box features inlet and outlet HEPA filters (99.99% efficiency on 0.3µm particulates) and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders

Supplier: Labconco

Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR

Supplier: Labconco

Formulated for use in automatic laboratory glassware washers

Supplier: Labconco

Replacement Prefilter, 1 lb.

Supplier: Labconco

Cart features two removable stainless steel pans with an open side for moving equipment from countertop to cart

Supplier: Labconco

Open Combination Kjeldahl Digestion/Distillation Apparatus

Supplier: Labconco

Labconco Protector® Premier® Fiberglass Fume Hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up. There are no seams where deterioration can occur or where contaminants can collect. These general purpose hoods are ideal for corrosive fumes but should not be used with perchloric acid, or radioactive or biological hazards.

Supplier: Labconco

5' SpillStopper™ Work Surface, No Cupsink Cutouts

Supplier: Labconco

Guardian™ airflow monitors continuously check the face velocity of laboratory hoods and enclosures and alert the operator to airflows that drop outside preset levels with audible and visual alarms. The audible alarm can be muted at the touch of a switch.

Supplier: Labconco

Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.

Supplier: Labconco

Unit holds six 30 or 100mL flasks on individual 200W electric heaters

Supplier: Labconco

Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment. The epoxy-coated steel canopy has a built-in baffle to increase air velocities and enhance its overall capture efficiency. The canopy may be installed on a wall or suspended from the ceiling* for peninsula and corner locations. For most efficient performance, the canopy hood should be installed up to 30.5cm (12") above the equipment to be ventilated.

Supplier: Labconco

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: Labconco

Aluminum Seal

Supplier: Labconco

Designed for use with glassware and small equipment

Supplier: Labconco

Produce up to 350 liters per minute of pure nitrogen.