78 Results for: "LABCONCO CORPORATION MX"

Supplier: LABCONCO CORPORATION MX

Wash rings are suitable for use in perchloric acid duct systems.

Supplier: LABCONCO CORPORATION MX

100mL beakers for Goldfisch Fat and Oil Extractor (27681-000). Manufactured of durable thick-wall borosilicate glass. Top is flanged and grounded to facilitate connection to condenser.

Supplier: LABCONCO CORPORATION MX

Logic Cart fits under any telescoping base stand. Features three small and one large compartments, one drawer, front panel cut out for dispensing wipers or gloves, and HDPE worksurface. W×D×H: 635×483×686 mm (25×19×27").

Supplier: LABCONCO CORPORATION MX

Standard cabinets support Labconco® laboratory hoods and can be used for storage of small laboratory instruments. Cabinets are constructed of white epoxy-coated steel and include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall. Available in six widths and two heights. Single-door models can be ordered with left or right hinge opening.

Supplier: LABCONCO CORPORATION MX

Safely store and vent acids and other highly corrosive liquids. Cabinets are constructed of durable white epoxy-coated steel with corrosion-resistant polyethylene interior liner. Equipped with leveling legs and rear vent connection cutouts for venting the cabinet into a laboratory hood. Include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall.

Supplier: LABCONCO CORPORATION MX

There is a wide selection of accessories to customize your glassware washer to your specific needs and applications. These racks and accessories are for use with Labconco FlaskScrubber®, SteamScrubber®, FlaskScrubber® Vantage glassware washers. Racks and inserts are stainless steel unless otherwise stated.

Supplier: LABCONCO CORPORATION MX

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: LABCONCO CORPORATION MX

Includes 1.5 inch diameter metal flexible hose, two hose clamps and 2 inch NPT x 1.5 inch slip-fit outlet adapter.

Supplier: LABCONCO CORPORATION MX

Accessory to Crude Fiber Extractor. Standard polyethylene Buchner funnel with a 200-mesh stainless steel screen heat sealed into the bottom of the upper section.

Supplier: LABCONCO CORPORATION MX

Sturdy molded glass developing tanks feature clear sides to allow unobstructed visual inspection of TLC plates up to 20x20cm (7⁷/₈x7⁷/₈") in size

Supplier: LABCONCO CORPORATION MX

Accessory for Freeze Dryer, FreeZone®

Supplier: LABCONCO CORPORATION MX

This benchtop stoppering tray dryer and lyophilizer uses dual CFC/HCFC-free refrigeration systems in series to cool the collector coil to –85°C (–121°F), ideal for freeze drying samples with low eutectic points. The refrigeration systems work in concert with a 1000W heater for cooling and heating fluid medium circulating through channels in the shelf from –55 to 50°C (–67 to 122°F), or to a pre-freeze shelf temperature of –75°C (–103°F). The stainless steel collector coil is capable of removing 1.8L (0.49gal.) of water in 24 hours and can hold 2.5L of ice before defrosting. A microprocessor controls the circulating fluid temperature to ±1°C of set point.

Supplier: LABCONCO CORPORATION MX

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures

Supplier: LABCONCO CORPORATION MX

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, and Protector Radioisotope laboratory hoods. Base stands are constructed of durable 4.5cm (13/4") tubular, glacier white epoxy-coated steel and support loads up to 453.6kg (1000lbs.). ADA-compliant. Stands with telescoping legs are adjustable from 69.9–85.1cm (27¹/₂–33¹/₂") high. Hydraulic lift base stands adjust from 64.8–85.1cm (25¹/₂–33¹/₂") high and include four powder-coated, die-cast feet with levelers. Manual hydraulic lift models include front-accessible hand crank. Electric hydraulic lift models include a front-accessible up/down switch.

Supplier: LABCONCO CORPORATION MX

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: LABCONCO CORPORATION MX

Fast-Freeze® flasks for FreeZone® Freeze Dry Systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO CORPORATION MX

Most items are made of Type 304 stainless steel

Supplier: LABCONCO CORPORATION MX

High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.

Supplier: LABCONCO CORPORATION MX

Intelli-Sense™ Multi-Speed PVC Blowers handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid

Supplier: LABCONCO CORPORATION MX

Portable exhausters for use with XPert™ balance enclosures and weigh boxes, Precise™ HEPA-filtered glove boxes, and Protector™ XVS ventilation stations, demonstration hoods, and workstations. Exhausters use carbon and/or HEPA filters to remove hazardous powders, particulates, or vapors from the exhaust air stream, returning filtered air to the environment. No ducting to the outside is required.

Supplier: LABCONCO CORPORATION MX

120Wcm.

Supplier: LABCONCO CORPORATION MX

Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware.

Supplier: LABCONCO CORPORATION MX

Damper fitting allows airflow balance

Supplier: LABCONCO CORPORATION MX

With 12.7cm diameter toe-locking casters with bearings for quiet operation. For 0.6m models. Made of durable 4.4cm thick, tubular, glacier white epoxy-coated steel. Adjustable height from 70 to 85cm in 2.5cm increments. An accessory for Purifier* enclosures and benches.

Supplier: LABCONCO CORPORATION MX

Attachment port lid has a 7.62 cm (3") diameter opening to permit the use of heated drying chamber or manifolds 26617-017, -021 or -023 atop the FreeZone® 4.5 L freeze dry systems (26671-511, -513).

Supplier: LABCONCO CORPORATION MX

Frame is constructed of 2.5cm (1") square 18-gauge welded tubular steel with corrosion-resistant glacier white epoxy coating

Supplier: LABCONCO CORPORATION MX

Product Shelves fit inside FreeZone® Clear or Port Drying Chambers to accommodate bulk samples, microtiter plates, vials, or serum bottles for bulk drying applications.

Supplier: LABCONCO CORPORATION MX

With left side 3Inch x 6Inch oval cupsink cutout (cupsink sold separately), for 4Feet Protector Premier Hood with Eco-Foil air foil, 48Inch w x 30Inch d x 1.25Inch thick.

Supplier: LABCONCO CORPORATION MX

Labconco Protector® Premier® Fiberglass Fume Hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up. There are no seams where deterioration can occur or where contaminants can collect. These general purpose hoods are ideal for corrosive fumes but should not be used with perchloric acid, or radioactive or biological hazards.

Supplier: LABCONCO CORPORATION MX

FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. Collectors are available to -50° C or -84° C.