"LABCONCO CORPORATION"

Supplier: LABCONCO CORPORATION

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: LABCONCO CORPORATION

One 8" filler panel is included with each storage cabinet to extend cabinet depth to 30" and to enclose the utility chase behind the cabinet.

Supplier: LABCONCO CORPORATION

Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® Premier® Fiberglass Hoods feature left and right-sided GFCI duplexes and Labconco's signature one-piece molded fiberglass reinforced polyester liner that provides superior corrosion and chemical resistance and durability. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector Premier to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION

Standard cabinets support Labconco® laboratory hoods and can be used for storage of small laboratory instruments. Cabinets are constructed of white epoxy-coated steel and include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall. Available in six widths and two heights. Single-door models can be ordered with left or right hinge opening.

Supplier: LABCONCO CORPORATION

Provides a non-ventilated, circulation-free work area designed to reduce cross-contamination during polymerase chain reaction (PCR) experiments. The unit is constructed of UV-resistant, glacier white, dry powder epoxy-coated aluminum and steel with 0.6cm (¹/₄") tempered safety glass sash and sides. Angled, hinged sash features a 19.8cm (7¹³/₁₆") high opening for closer, more comfortable viewing than vertical sashes, and an interlocked UV protection panel that must be in place to turn on UV light but can be removed when the light is off for full access to enclosure opening.

Supplier: LABCONCO CORPORATION

Fiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres.

Supplier: LABCONCO CORPORATION

This ventilated work area is ideal as a weighing station, light-duty fume hood, science classroom workstation, solvent cleaning work bay, or for veterinary pathology and cytology. Even, inward airflow protects the operator and contains hazardous or noxious fumes, vapors, and fine powders.

Supplier: LABCONCO CORPORATION

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® XStream® Fiberglass Hoods feature left and right-sided GFCI duplexes and provides excellent containment and energy savings. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector® XStream® hood to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION

These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Supplier: LABCONCO CORPORATION

Safely store and vent solvents and other highly flammable liquids. Dual-wall white epoxy-coated steel construction with 3.8cm (1¹/₂") air gap for complete protection. Equipped with three-point locking handle, rear vent outlets with flame arresters and closure plugs, dished epoxy-coated steel shelf, and leveling legs. Include one 20.3cm (8") filler panel to increase cabinet’s overall depth from 55.9cm (22") to 76.2cm (30"), for installation flush to wall.

Supplier: LABCONCO CORPORATION

For 15.2cm I.D. hose. An accessory for use with XPert* Balance Enclosures, Protector* XVS Ventilation Stations, and Protector Workstations.

Supplier: LABCONCO CORPORATION

Logic Cart fits under any telescoping base stand. Features three small and one large compartments, one drawer, front panel cut out for dispensing wipers or gloves, and HDPE worksurface. W×D×H: 635×483×686 mm (25×19×27").

Supplier: LABCONCO CORPORATION

8' REDISHIP SpillStopper™ Work Surface

Supplier: LABCONCO CORPORATION

REDISHIP SpillStopper™ Work Surface

Supplier: LABCONCO CORPORATION

CEILING ENCL 31.7IN D 6FT W