You searched for: Cleanroom Wipes

Supplier: BERKSHIRE CORP

Pro-Wipe® 750 is a solvent-resistant wipe with exceptional absorbency that makes an excellent upgrade for industrial wipe users. It is composed of a layer of cellulose bonded between two outer layers of polypropylene.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: CONTEC, INC. MX

Premoistened polyester wipes are designed for general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: CONTEC, INC. MX

SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: Texwipe

These convenient wipers offer portion control and reduced potential of spillage in and out of the cleanroom.

Supplier: Texwipe

Wiper is made from thermally bonded polypropylene and cellulose. Cellulose contributes to wiper's high sorption while the polypropylene provides resistance to strong acids. The soft, pillowy texture makes it ideal for wiping abrasion-sensitive surfaces. The surface texture allows for greater sorption of liquids — wiper can absorb five times its weight in water. Suitable for use in ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments. Packed in an ISO Class 5 (FED-STD-209E Class 100/M3.5) cleanroom.

Supplier: Texwipe

These 100% knitted wipers are made from continuous-filament polyamide fiber in a double-knit, no-run, interlock construction.

Supplier: Texwipe

This sealed-border knitted polyester wiper with excellent absorbency is ideal for meeting your most stringent production environment needs.

Supplier: Texwipe

SterileWipe™ Low Particle Wiper is a 100% continuous-filament polyester wiper that is low in particle generation and extractable levels and provides excellent cleaning performance in critical sterile environments

Supplier: CONTEC, INC. MX

Amplitude™ Theta™ Wipes are made from a lightweight hydroentangled cellulose/polyester, which creates an economical absorbent wipe ideal for general cleaning applications.

Supplier: CONTEC, INC. MX

Amplitude™ Lambda™ Wipes are a hydroentangled blend of 58% cellulose and 42% polyester. The Lambda™ wipe is highly sorbent, has excellent durability, and good cleanliness.

Supplier: Texwipe

An excellent choice for critical environments where the characteristics of foam are desired and low particulation is essential.

Supplier: BERKSHIRE CORPORATION MX

MicroSeal SuperSorb® Lite are high absorbency 100% continuous filament polyester knit wiper.

Supplier: Texwipe

Ideal for critical environments where low particulate levels and high absorbency are required. Wipers are constructed of a clean, strong, hydroentangled blend of 45% polyester and 55% cellulose. This combination provides the high absorbency of a natural fiber with the strength of a synthetic fiber. Wipers are also treated with an ultra-low particle finish that gives the wipers significantly lower particle generation. The finish is nonionic and doesn’t extract into commonly used solvents. Suitable for use in ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments.

Supplier: CONTEC, INC. MX

Amplitude™ Zeta™ wipes are a 5-ply, thermally bonded wipe which is comprised of a layer of cellulose sealed between two layers of meltblown polypropylene. This creates a material which is very absorbent and has a high level of cleanliness.

Supplier: CONTEC, INC. MX

These sealed-edge wipers offer an extremely high sorptive capacity and are designed for critical sterile environments.

Supplier: CONTEC, INC. MX

Specifically designed for the biotech, pharmaceutical, medical device, and electronics industries. Highly sorbent, nonwoven polyester/cellulose blend wipers feature contamination control fabric by DuPont™. Wipers have low levels of particles and extractables. Apertured surface texture promotes effective cleaning and particle removal. Compatible with ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments. Lot-numbered for traceability.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: CONTEC, INC. MX

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: BERKSHIRE CORPORATION MX

SatPax® wipers provide a convenient combination of solvent and wiper that improves the cleaning process.It resolves safety issues associated with storage, mixing, and dispensing of solvents.

Supplier: CONTEC, INC. MX

Made from high-quality, unlaundered 100% continuous filament polyester. Processed with unique technology for maximum cleanliness and excellent absorption properties. Low-linting wipers for use in less critical applications, such as rugged cleaning that requires tear- and abrasion-resistance. Suitable for hybrid electronics. For use in ISO Class 7 (FED-STD-209E Class 10,000/M5.5) environments. Stacked.

Supplier: CONTEC, INC. MX

Premoistened knitted polyester wipers and nonwoven polypropylene wipers are saturated with various solvent blends.

Supplier: Texwipe

AlphaSorb® HC (high capacity) two-ply, knitted, 100% polyester wipers are engineered to combine high sorbency with low particle and extractable levels.

Supplier: Texwipe

POLYSAT® wipers are made from 100% polypropylene and pre-wetted with 70% IPA.

Supplier: Texwipe

Ideal for cleaning computer and electronic equipment.

Supplier: Texwipe

AlphaWipe® is an ultraclean and highly adsorbent wiper ideal for critical environments.

Supplier: FOAMTEC INTERNATIONAL, LLC.

These soft, nonabrasive wipers trap particulate matter in a skeletal structure designed to reduce particulate contamination.

Supplier: CONTEC, INC. MX

For general-purpose cleaning in ISO Class 3 (FED-STD-209E Class 1/M1.5) environments. Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment.

Supplier: CONTEC, INC. MX

SterileSorb™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent with excellent durability and good cleanliness. SterileSorb™ wipes are strong and durable wet or dry, making them excellent for use in general cleaning and spill pick up.