Supplier: BDH

High purity acid for quantitative trace metal analysis in the parts-per-billion (ppb) level.

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

For trace metal analysis. Certificate of lot analysis provided.

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Hydrochloric Acid, CMOS

Supplier: Avantor

The quality of BAKER ANALYZED™ ACS Reagents meets or exceeds the requirements set forth by the American Chemical Society (ACS). These acids are tested for common trace metals.

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Corrosive liquid.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Hydrochloric acid 36,5% - 38,0% NF, ACS, FCC, Macron Fine Chemicals™

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Hydrochloric acid 25%, Biotech Reagent, J.T.Baker®

Supplier: AVANTOR PERFORMANCE MATERIALS MX

J.T.Baker® volumetric and analytical solutions. These solutions are suitable for use in ACS, USP and NF compendial methods and general laboratory applications. 

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

J.T.Baker® volumetric and analytical solutions. These solutions are suitable for use in ACS, USP and NF compendial methods and general laboratory applications. 

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.

Supplier: AVANTOR PERFORMANCE MATERIALS MX

J.T.Baker® volumetric and analytical solutions. These solutions are suitable for use in ACS, USP and NF compendial methods and general laboratory applications. 

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Makes 0.1N solution after dilution to 1000 ml

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

pH adjusters are used to adjust the pH of formulations. This category includes acids that are notoriously difficult to source as truly cGMP-produced and amino acids that most companies do not fully test for EP, BP and JP. Avantor provides all that and more with our cGMP-produced acids and mutli-compendial amino acids.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Lot analysis on label.

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

Makes 1N solution after dilution to 1000 ml

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

ACS—Reagents meeting the requirements of the American Chemical Society Committee on Analytical Reagents. The specifications listed in this catalog are based on the ACS Reagent Chemicals Tenth Edition.  

Supplier: AVANTOR PERFORMANCE MATERIALS MX

Certificate of lot analysis provided.

Supplier: SPECTRUM CHEMICAL AND MX

HYDROCHLORIC ACID, 37 PERCENT, NF is a colorless and clear, highly corrosive, highly pungent solution of hydrogen chloride in water. This strong mineral acid that is naturally found in gastric acid has many uses such as chemical reagent in the production of food additives, leather processing and as a desclaing agent. As an monoprotic acid and one of the six common strong mineral acids it is the least likely to be subject to an oxidation-reduction reaction. The fact that it is available as a pure reagent make it an excellent acidifying reagent. Spectrum Chemical manufactured FCC products, including all FCC hydrochloric acid products have been approved for food and beverage usage, and are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities.