You searched for: Fume Hoods and Enclosures

Supplier: LABCONCO CORPORATION MX

Guardian™ airflow monitors continuously check the face velocity of laboratory hoods and enclosures and alert the operator to airflows that drop outside preset levels with audible and visual alarms. The audible alarm can be muted at the touch of a switch.

Supplier: VWR International

The VWR® PCR Workstation HEPA is a PCR enclosure for PCR sample preparation with an HEPA Filter. It offers dual-decontamination action by UV inactivation of airborne and surface-bound contaminants, therefore, representing an ideal environment for PCR set up and other sensitive protocols. In addition, the HEPA filter with UV provides a barrier against dust, bacteria and mould.

Supplier: LABCONCO CORPORATION

These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Supplier: VWR International

The VWR® PCR Workstation offers twin decontamination action by UV inactivation of airborne and surface-bound contaminants, and therefore represents an ideal environment for PCR sample preparation and other sensitive protocols.

Supplier: LABCONCO CORPORATION

This ventilated work area is ideal as a weighing station, light-duty fume hood, science classroom workstation, solvent cleaning work bay, or for veterinary pathology and cytology. Even, inward airflow protects the operator and contains hazardous or noxious fumes, vapors, and fine powders.

Supplier: LABCONCO CORPORATION

Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® Premier® Fiberglass Hoods feature left and right-sided GFCI duplexes and Labconco's signature one-piece molded fiberglass reinforced polyester liner that provides superior corrosion and chemical resistance and durability. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector Premier to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION MX

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: LABCONCO CORPORATION

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment. REDISHIP Protector® XStream® Fiberglass Hoods feature left and right-sided GFCI duplexes and provides excellent containment and energy savings. Each hood is factory prepared to accommodate up to eight service fixtures (sold separately). The hood's by-pass block design restricts airflow, allowing the REDISHIP Protector® XStream® hood to operate as a reduced air volume (RAV) or variable air volume (VAV) system with no modifications.

Supplier: LABCONCO CORPORATION

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures

Supplier: LABCONCO CORPORATION

Provides a non-ventilated, circulation-free work area designed to reduce cross-contamination during polymerase chain reaction (PCR) experiments. The unit is constructed of UV-resistant, glacier white, dry powder epoxy-coated aluminum and steel with 0.6cm (¹/₄") tempered safety glass sash and sides. Angled, hinged sash features a 19.8cm (7¹³/₁₆") high opening for closer, more comfortable viewing than vertical sashes, and an interlocked UV protection panel that must be in place to turn on UV light but can be removed when the light is off for full access to enclosure opening.

Supplier: LABCONCO CORPORATION MX

High performance fume hoods with integrated sash sensors for automatic multi-speed blower control.

Supplier: LABCONCO CORPORATION MX

Labconco Protector® Premier® Fiberglass Fume Hoods have a one-piece liner of specially-formulated, fiberglass-reinforced polyester, which offers corrosion and fire resistance and easy clean up. There are no seams where deterioration can occur or where contaminants can collect. These general purpose hoods are ideal for corrosive fumes but should not be used with perchloric acid, or radioactive or biological hazards.

Supplier: LABCONCO CORPORATION MX

Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.

Supplier: LABCONCO CORPORATION MX

Combine with a base stand or cabinet to support Fiberglass 30 and Basic™ Labconco® laboratory hoods. Surfaces are black in color and have a depth of 76.2cm (30") and a thickness of 3.2cm (1¹/₄").

Supplier: LABCONCO CORPORATION MX

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, and Protector Radioisotope laboratory hoods. Base stands are constructed of durable 4.5cm (13/4") tubular, glacier white epoxy-coated steel and support loads up to 453.6kg (1000lbs.). ADA-compliant. Stands with telescoping legs are adjustable from 69.9–85.1cm (27¹/₂–33¹/₂") high. Hydraulic lift base stands adjust from 64.8–85.1cm (25¹/₂–33¹/₂") high and include four powder-coated, die-cast feet with levelers. Manual hydraulic lift models include front-accessible hand crank. Electric hydraulic lift models include a front-accessible up/down switch.

Supplier: Labconco

Specifically designed to solve unique ventilation problems, this canopy hood vents nontoxic materials such as heat, steam, and odors from large or bulky equipment. The epoxy-coated steel canopy has a built-in baffle to increase air velocities and enhance its overall capture efficiency. The canopy may be installed on a wall or suspended from the ceiling* for peninsula and corner locations. For most efficient performance, the canopy hood should be installed up to 30.5cm (12") above the equipment to be ventilated.

Supplier: LABCONCO CORPORATION MX

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: LABCONCO CORPORATION MX

These enclosures provide practical, economical protection of operator and environment for applications that generate fine dusts or aerosols but do not provide product protection

Supplier: LABCONCO CORPORATION MX

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.

Supplier: LABCONCO CORPORATION MX

Protects your non-hazardous applications with horizontal unidirectional (laminar) ISO Class 4 air across the work area.