You searched for: Dry Cleanroom Wipes

Supplier: Texwipe

Ideal for cleaning computer and electronic equipment.

Supplier: Texwipe

These 100% knitted wipers are made from continuous-filament polyamide fiber in a double-knit, no-run, interlock construction.

Supplier: Texwipe

An excellent choice for critical environments where the characteristics of foam are desired and low particulation is essential.

Supplier: BERKSHIRE CORP

Ideal for cleaning work surfaces and spill pickup, general-purpose wiping, and polishing of surface areas, including optics.

Supplier: Texwipe

Ideal for critical environments where low particulate levels and high absorbency are required. Wipers are constructed of a clean, strong, hydroentangled blend of 45% polyester and 55% cellulose. This combination provides the high absorbency of a natural fiber with the strength of a synthetic fiber. Wipers are also treated with an ultra-low particle finish that gives the wipers significantly lower particle generation. The finish is nonionic and doesn’t extract into commonly used solvents. Suitable for use in ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments.

Supplier: BERKSHIRE CORP

Pro-Wipe® 750 is a solvent-resistant wipe with exceptional absorbency that makes an excellent upgrade for industrial wipe users. It is composed of a layer of cellulose bonded between two outer layers of polypropylene.

Supplier: BERKSHIRE CORP

Wipers are made from 100% continuous filament knit polyester.

Supplier: BERKSHIRE CORP

These extremely clean and pure polyester/rayon non-woven wipers are made from soft, absorbent Dupont™ Sontara® MicroPure LP fabric.

Supplier: BERKSHIRE CORP

All-purpose Class 100 wipers are extremely absorbent.

Supplier: BERKSHIRE CORP

Lensx® 90 is 100% biodegradable wipers.

Supplier: Texwipe

These 100% polyester wipers are ideal for any critical wiping application where softness and nonabrasiveness are essential. The hydroentanglement process uses jets of water to mechanically entangle the fibers, eliminating the need for chemical binders. The sorptive capacity is five times the weight of the wiper. Low levels of nonvolatile residue and no surfactants. Suitable for use in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments. Packed in an ISO Class 5 cleanroom.

Supplier: Texwipe

These lightweight, high-quality wipers are constructed from 100% continuous-filament knitted polyester for ultra-low particle generation and low extraction levels. Wipers are ideal for critical cleanroom applications, spill control, and wiping sensitive surfaces.

Supplier: BERKSHIRE CORP

MicroPolx® 1100 is a 100% polyester microfiber sealed edge cleanroom wiper.

Supplier: Texwipe

These 100% continuous-filament polyester wipers are constructed in a double-knit, no-run, interlock pattern that is excellent for cleaning process equipment.

Supplier: BERKSHIRE CORP

Bonded 2-ply, 100% knitted polyester wipers feature superior absorbency with a high level of cleanliness and durability.

Supplier: Texwipe

AlphaWipe® is an ultraclean and highly adsorbent wiper ideal for critical environments.

Supplier: BERKSHIRE CORP

ValuClean® Plus is a hydroentangled rayon/polyester nonwoven wiper recommended for ISO class 5 and above environments and offers durability and cleanliness.

Supplier: BERKSHIRE CORP

Nonwoven wipers engineered for applications in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments, including spill control and surface cleaning. Made of nonwoven, spunlaced DuPont™ Sontara® Micropure 100 fabric, a polyester/cellulose blend made without binders or surfactants. Apertured construction allows for increased absorbency. Excellent particulate and purity control.

Supplier: Texwipe

AlphaSorb® HC (high capacity) two-ply, knitted, 100% polyester wipers are engineered to combine high sorbency with low particle and extractable levels.

Supplier: Texwipe

Two-ply double-knit 100% continuous-filament polyester wipers offer high sorbency performance. All four edges are thermally sealed, forming a border to prevent particle and fiber release. Suitable for use in ISO Class 3 (FED-STD-209E Class 1/M1.5) environments. To reduce particulation, wiper TWTX1050 is Vectra processed and wiper TW-TX1052 is laundered in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom.

Supplier: Texwipe

Wiper is made from thermally bonded polypropylene and cellulose. Cellulose contributes to wiper's high sorption while the polypropylene provides resistance to strong acids. The soft, pillowy texture makes it ideal for wiping abrasion-sensitive surfaces. The surface texture allows for greater sorption of liquids — wiper can absorb five times its weight in water. Suitable for use in ISO Class 6 (FED-STD-209E Class 1000/M4.5) environments. Packed in an ISO Class 5 (FED-STD-209E Class 100/M3.5) cleanroom.

Supplier: Texwipe

Soft, absorbent, single-ply wiper is made from continuous filament, double-knit polyester fabric. All four edges are thermally sealed, forming a border to prevent particle and fiber release. Ultralow particulate, fiber, ionic, and extractable levels prevent product and cleanroom contamination. Suitable for ISO Class 3 (FED-STD-209E Class 1/M1.5) environments, this wiper is excellent as a clean work surface or for transport of sensitive parts. Can be used with deionized water, isopropyl alcohol, or other solvents for cleaning of critical surfaces.

Supplier: BERKSHIRE CORP

EcoClean® products are nonwoven materials 100% biodegradable and sustainable products. It is composed of U.S.-sourced cotton fibers and is manufactured by a proprietary process for low fiber release and high strength. Unlike the traditional cotton twill, it has low ionic traces and low fibers.

Supplier: BERKSHIRE CORP

These continuous-filament 100% knitted polyester wipers are designed for critical cleanroom applications. Tubular construction yields only two open edges, which are heat-sealed to prevent contamination. No adhesives, which could extract and contaminate, are used in the heat-sealing process. Abrasion- and chemical-resistant. Double-ply thickness. Recommended for use in ISO Class 3 (FED-STD-209E Class 1/M1.5) environments. Wipers are laundered and packaged in an ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom and double-wrapped to ensure cleanliness. Wipers are stacked.

Supplier: BERKSHIRE CORP

Ideal for absorbing spills of solvents and deionized water in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments. Also suitable for general surface and equipment cleaning. Nonwoven wipers are made from a blend of 45% polyester and 55% cellulose with superior strength and absorbency — wipers are able to absorb four times their own weight. Manufactured without binders or surfactants. Proprietary treatment enhances cleanliness by reducing particle generation. Low levels of ions and organic extractables.