Microplate Seals

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: VWR Collection

Rayon film with medical grade adhesive. Hydrophobic, porous film in sheeted roll format for sealing tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.

Supplier: VWR Collection

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: VWR Collection

VWR®, Microplate seal, Cap strip, Single sheet/mat/strip, Cap strip for PCR plates and tube strips, dome, Non sterile

Supplier: VWR Collection

Transparent silicone mats fit most brands of 96-well PCR plates.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: VWR Collection

Sealing mats made of EVA (Ethylene Vinyl Acetate), suitable for square well plates.

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Collection

Aluminum foils for use with 96-well or 384-well plates. Foils offer excellent chemical resistance (DMSO).

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: VWR Collection

These 50 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with tissue culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

VWR®, PCR tubes, Cap strip, Single sheet/mat/strip, Optically clear 8-cap strips for Real-Time PCR plates, PP

Supplier: VWR Collection

Polyester seals feature a strong adhesive to minimize evaporation during PCR and storage applications.

Supplier: VWR Collection

VWR® PCR membranes are DNAse- and RNAse-free.