標準

Meeting regulations in any industry, standards are essential for periodically checking the accuracy of equipment pieces. By comparing against the known values, output readings detect errors present and inform personnel adjustments are required. Once the settings of the manual or automatic instruments have returned to zero, the reestablished conditions will yield optimal working performance. Calibrating with concentrated standards eliminates the possibility that environmental changes will induce instrumental miscalculation when accuracy matters most.

VWR®, Mercury standard solution, 1,000 mg/l Hg in dil. nitric acid (from Hg) ARISTAR® standard for ICP

Supplier: VWR Chemicals

Hg in HNO₃ 10%.

Expand 2 Items

VWR® ARISTAR®, Vanadium Standard Solution, 10000 mg/L V in dil. Nitric Acid (from V2O5), Standard for ICP

Supplier: VWR Chemicals

V₂O₅ in HNO₃ 2 to 5%.

Expand 2 Items

VWR® AVS TITRINORM, Indium Standard Solution, 1000 mg/L In in dilute Nitric Acid AVS TITRINORM Standard for AAS

Supplier: VWR Chemicals

Indium Standard, 1000 mg/L, VWR® AVS TITRINORM, Indium, Matrix: Nitric acid dil., Application: AAS standards

Expand 2 Items

ARISTAR®VWR® , Magnesium Standard Solution, 1000 mg/L Mg in dil. Nitric Acid (from MgO), Standard for ICP

Supplier: VWR Chemicals

MgO in HNO₃ 2 to 5%.

Expand 2 Items

VWR® ARISTAR®, Gallium Standard Solution, 10000 mg/L Ga in dilute Nitric Acid (from Ga), Standard for ICP

Supplier: VWR Chemicals

Ga in HNO₃.

Expand 1 Items

VWR®, Tungsten standard solution, 1000 mg/L W in nitric acid with hydrofluoric acid (each max. 1%) AVS TITRINORM standard for AAS

Supplier: VWR Chemicals

Tungsten Standard, 1000 mg/L, VWR®, Tungsten, Matrix: 1% HNO₃/2% HF, Application: AAS standards

Expand 2 Items

VWR® AVS TITRINORM, Lanthanum Standard Solution, 1000 mg/L La in dil. Nitric Acid AVS TITRINORM Standard for AAS

Supplier: VWR Chemicals

Lanthanum Standard, 1000 mg/L, VWR® AVS TITRINORM, Lanthanum, Matrix: Nitric acid dil., Application: AAS standards

Expand 2 Items

VWR® ARISTAR®, Rubidium Standard Solution, 1000 mg/L Rb in dil. Nitric Acid (from RbNO3), Standard for ICP

VWR® ARISTAR®, Rubidium Standard Solution, 1000 mg/L Rb in dil. Nitric Acid (from RbNO₃), Standard for ICP

Supplier: VWR Chemicals

RbNO₃ in HNO₃ 2 to 5%.

Expand 1 Items

VWR®, Density standards referenced at 60 °C

Supplier: VWR Chemicals

These products can be used as calibration standards for density measurements by pycnometric, vibrational or hydrometer-based techniques.

Expand 1 Items

VWR®, Colour reference solutions acc. to Ph. Eur., ready to use

Supplier: VWR Chemicals

These solutions are developed and produced according to chapter 2.2.2. 'Degree of colouration of liquids' of the European Pharmacopoeia. (brown, brown-yellow, green-yellow, red and yellow). These kits are ready to use, and are dedicated to help you save time and money because preparation of these solutions is very complex.

Expand 6 Items

ARISTAR®, Bismuth Standard Solutions for ICP-MS

Supplier: VWR Chemicals

Bismuth Standard, 10 ppm, VWR® ARISTAR®, Bismuth, Matrix: 2-5% HNO₃, Application: ICP-MS standards

Expand 2 Items

VWR®, Density Standards for the Petroleum Industry, Certified Reference Materials

Supplier: VWR Chemicals

Density Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for density in accordance with methodology, but not limited to, such as ASTM D4052, IP 365 and other equivalent international methodology.