561 Results for: "benchtop absorbant mat"

Supplier: VWR Collection

This speciality spill kit contains sorbents, neutralising agent, PPE and accessories so that you are prepared in an emergency. Contained in a handy tub, providing 17 litres of absorption capacity.

Supplier: VWR Collection

A full range of accessories is available to complement the 211DS. The 211DS includes three shelves (one is a half-size shelf, allowing tall vessels to be accommodated). Two shaking platforms (sold separately) are available for the 211DS; the flask platform is predrilled to accept a variety of different sized clamps while the flat platform has a nonslip rubber mat for holding dishes and plates in place.

Supplier: VWR Chemicals

Set for absorption of organics, aqueous solutions, alkalis and acids. It contains.

Supplier: VWR Chemicals

Developed to economically treat small spills, such as those that can occur in a laboratory environment. Provides easy access to the appropriate control agent for a particular type of chemical spill.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Collection

Critical swabs designed for cleaning disc drives, optics, PC board assemblies and other sensitive components.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Sweat absorbing, user-friendly, disposable, and hygienic solution.

Supplier: VWR Collection

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: Avantor

This reagent is satisfactory for use as a pH standard. For use as an acidimetric standard, this material should be lightly crushed and dried for 2 hours at 120 °C to remove any absorbed moisture.

Supplier: VWR Collection

High absorbency, low particle generation.

Supplier: VWR Chemicals

Mineral oils are almost universally present in our environment. The main compounds of interest are mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH).
Both types are easily absorbed by the human body from food and can accumulate in body fat and in some organs.

Supplier: VWR Chemicals

Destaining bags are designed to safely remove ethidium bromide from solution during overnight treatment. Each bag extracts up to 5 mg of ethidium bromide from solution, thus minimising the exposure of research personnel to this toxic material. The special absorbent mixture retains dye molecules in a convenient bag for removal and incineration.

Supplier: VWR Collection

Wipers exhibit a higher absorbency rate, with lower particle generation and ion content.

Supplier: VWR Collection

These durable, polypropylene boxes maintain their integrity under harsh freezer conditions and will not absorb water or degrade like cardboard storage boxes.

Supplier: VWR Collection

Polyester 2×8 strip films are identical to polyester films in material and adhesive, but designed for sealing only one or two 8-well rows at a time on either strip-well plates or standard plates whenever rows must be selectively protected or accessed. Sterile product is packed in tamper-evident bags of 50/bag.

Supplier: VWR Collection

This wipe is made from a hydroentangled blend (45% polyester and 55% cellulose) that combines the strength and cleanliness of synthetic polyester with the high absorbency of cellulose.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency. The wipe's size is perfectly suitable for usage on a mop frame for floor, ceiling and wall cleaning.

Supplier: VWR Chemicals

Mineral oils are almost universally present in our environment. The main compounds of interest are mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH).
Both types are easily absorbed by the human body from food and can accumulate in body fat and in some organs.

Supplier: VWR Collection

These 50 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with tissue culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

Absorbent, soft, thick, low lint tissues made from virgin fibres. For light use in the laboratory, electronics, computer industry, pharmaceuticals, biotechnology and optics.

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR Collection

These wipes are made from 100% continuous filament, double-ply, ultrasonically-sealed polyester to provide better absorbency.

Supplier: VWR Collection

Mops suitable for wet wiping in sterile areas and cleanrooms. One-piece, made from highly absorbent polyurethane. These coated mop heads are ideal for disinfecting rough or sharp edged surfaces, while still ensuring excellent take-up of liquids.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: VWR Collection

Polished granite. Four absorbing feet dampen the transmission of extraneous vibrations to this slab making it suitable, not only for high precision weighing, but also microscopy and other similar delicate instrumentation.

Supplier: VWR Collection

Easily pierceable 94,1 µm thick PE films with acrylic adhesive allow direct sample recovery with singe- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: VWR Collection

Aluminium foils, 75,7 µm thick, for use with 96 or 384 well plates. Fit inside the rim of raised rim plates. These foils have one partial width end tab. Available non sterile only.