400 Results for: "Rod Mill"

Supplier: VWR Collection

The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Supplier: VWR Collection

Homogeniser, 7 ml screw cap reinforced tubes, bulk packaged. For use with VWR Bead Mill MAX, VWR Bead Mill, and VWR Bead Mill 4, VWR®

Supplier: VWR Collection

Homogeniser, Bead Mill MAX 7 ml tube carriage kit. Holds 12×7 ml screw cap tubes

Supplier: VWR Collection

The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Supplier: VWR Collection

VWR® Bead Mill MAX is the premier model in the VWR Bead Mill homogeniser range. VWR Bead Mill MAX is designed to grind, lyse or homogenise the most difficult samples with repeatable results. The unique tube carriage motion ensures the intra-tube bead movement reduces swirling, and creates the highest bead impact force of any bead mill on the market.

Supplier: VWR Collection

These grinding jars can be used with the VWR® mixer mill, beater.

Supplier: VWR Collection

A ball mill for disintregration of small sample volumes that can also be used to shake/mix microtubes and microplates. Wide range of applications in different scientific fields from geology to biotechnology.

Supplier: VWR Collection

424: Filtration of lead sulphide, iron sulphide, silver sulphide, alkali carbonate, lead chromate, arsenic, antimony, cadmium and foodstuffs. Determination of sand content in dairy products. Determination of whiteness of pulp in paper mills.

Supplier: VWR Collection

Monoparameter colorimeter, Plastic stirring rod

Supplier: VWR Collection

PTFE with steel core.

Supplier: VWR Collection

This nickel-plated zinc connector holds rods firmly at 90°.

Supplier: VWR Collection

Heavy-duty, top-of-the-line rods provide maximum strength and durability. Constructed of 303 stainless steel.

Supplier: VWR Collection

Stainless steel 303.

Supplier: VWR Collection

Multiple rod connector holds lab-frame rods or extension clamps at 90° while allowing both horizontal and vertical adjustment of lattice after construction. Two adjacent rods fit into oval hole in connector that prevent turning when tightened.

Supplier: VWR Collection

Aluminium. For use with VWR® Talon® lab-frames.

Supplier: VWR Collection

Clamp holds thermometers, potash bulbs or drying tubes 114 mm from the support rod. Machine tapered, nickel plated brass hook won't bend, rust or corrode. Built in holder grips rods up to 19 mm in Ø.

Supplier: VWR Collection

Rods are made of stainless steel. Connectors and lab frame feet are constructed of nicke plated zinc.

Supplier: VWR Collection

Multi-purpose support was originally designed to permit cylindrical vessels up to 305mm (12") in diameter to sit close to the upright rod.

Supplier: VWR Collection

These vertical mounting lab frames are ideal for glassware set up in small laboratories or where space is limited. Frames measure 610×610 mm (24×24") with a 457 mm (18") wide base for stability. Base may be permanently mounted to benchtop with screws (included).

Supplier: VWR Collection

Replacement rod for VWR® Talon® support stands, stainless steel, Ø×H: 16×914 mm, VWR®

Supplier: VWR Collection

Heavy-duty support stands permit cylindrical vessels up to 30,5 cm (12") in diameter to sit close to the support rod. Ideal for mounting stirring motors for heavy equipment.

Supplier: VWR Collection

Cast aluminum. Frame connector with improved contours delivers simplicity, superior strength and a secure grip on lattice frame rods without slippage.

Supplier: VWR Collection

Solid PTFE.

Supplier: VWR Collection

Overhead stirrer plate stand 220×320 mm with rod height of 825 mm (Max. load 5 Litres), VWR®

Supplier: VWR Collection

S-connectors made from electro-polished stainless steel or nickel plated zinc.

Supplier: VWR Collection

This lab frame with horizontal or vertical mounting is ideal for distillation and general set-ups.

Supplier: Avantor Fluid Handling

Economical pumps for use in cabinets or tight work spaces.

Supplier: Avantor Fluid Handling

Compact size mounting rod—use these pumps almost anywhere.

Supplier: VWR Collection

The VWR® Multi-Sample Reaction Station enables heating and stirring of one size or up to five multiple sample sizes, all on one unit. The base plate has a centrally located threaded opening to accommodate a 13 mm diameter support rod.

Supplier: VWR Collection

VWR® Standard Hotplates Stirrers are microprocessor controlled and designed for general laboratory heating and stirring. These analogue units feature easy-to-use controls which allow dial-in adjustments. Rear housing features an integral support rod holder with locking knob to accept the optional support rod and clamp kit.