1354 Results for: "Fire Assay Lead Foil"

Supplier: VWR Collection

Made from a composite material including two plies of glass fibre matting and one layer of flame-retardant foil. For extinguishing and smothering relatively small fires. Environmentally friendly, these blankets contain no asbestos.

Supplier: VWR Collection

These 50 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with tissue culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

Hunter cupels have been a consistent mainstay in the assay industry for over 30 years.

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: VWR Collection

Premium, ultra-clean aluminium foil is strong and puncture-resistant.

Supplier: VWR Collection

Aluminium foil rolls in two different lengths for use with a foil dispenser.

Supplier: VWR Collection

Aluminium foils, 75,7 µm thick, for use with 96 or 384 well plates. Fit inside the rim of raised rim plates. These foils have one partial width end tab. Available non sterile only.

Supplier: VWR Collection

Pre-cut aluminum foil seals on a roll for PCR applications. Supplied on a roll with holder for ease of use.

Supplier: VWR Collection

Aluminum foils for use with 96-well or 384-well plates. Foils offer excellent chemical resistance (DMSO).

Supplier: VWR Collection

Pure aluminium 99,0 to 99,5%.

Supplier: VWR Collection

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR Collection

Easily pierceable 94,1 µm thick PE films with acrylic adhesive allow direct sample recovery with singe- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Adhesive sealing film or foil rolls constructed on plastic cores, for use with high throughput automated microplate sealers.

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: VWR Chemicals

COC flash point standards are tested and certified in accordance with ASTM D92 'Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.'

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: VWR Collection

Polyester seals feature a strong adhesive to minimize evaporation during PCR and storage applications.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR Collection

Polyester film with acrylic adhesive. These non pierceable films in sheeted-roll format are recommended for ELISA tests, general incubation and short-term storage.

Supplier: VWR Collection

VWR® PCR membranes are DNAse- and RNAse-free.

Supplier: VWR Collection

VWR®, Chromatography vial closure, Type: Screw cap, UREA, with metal foil/pulp liner

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Square well cap mats for sealing 96-well shallow or deep well plates.

Supplier: VWR Collection

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Chemicals

Flash point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. COC flash point standards are tested and certified in accordance with ASTM D92 'Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.'