778 Results for: "Certified Reference Materials, KLEN"

Supplier: VWR Chemicals

Organic Standard, α-Endosulfan Certified Reference Material, Pack type: Glass ampoule

Supplier: VWR Chemicals

Organic Standard, Propyzamide neat Certified Reference Material, Pack type: Glass ampoule

Supplier: VWR Chemicals

All turbidity standard solutions are Certified Reference Materials.

Supplier: VWR Chemicals

Flash point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. COC flash point standards are tested and certified in accordance with ASTM D92 'Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.'

Supplier: VWR Chemicals

Refractive index Certified Reference Materials (CRMs) are ideal for verification and calibration of temperature controlled refractometers, with each CRM providing certified values for refractive index measurements at 20, 25 and 30 °C.

Supplier: VWR Chemicals

This certified reference material is produced using a high purity starting material, acid from sub-boiling and 18 MOhm deionized water and filtered through a 0.2 micron filter.

Supplier: VWR Chemicals

The Refractive Index and Density Certified Reference Materials provide a flexible, cost-effective and efficient solution to any laboratory calibrating and/or verifying refractive index and density measurements – all from a single material.

Supplier: VWR Chemicals

Cloud Point Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cloud Point according to IP 219, ISO 3015, EN 23015, ASTM D2500 and other equivalent test methodology.

Supplier: VWR Chemicals

Flash point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. PMCC flash point standards are tested and certified in accordance with ASTM D93 'Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester - Procedure A'

Supplier: VWR Chemicals

This certified reference material is produced using a high purity starting material, acid from sub-boiling and 18 MOhm deionized water and filtered through a 0.2 micron filter.

Supplier: VWR Chemicals

Density Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for density in accordance with methodology, but not limited to, such as ASTM D4052, IP 365 and other equivalent international methodology.

Supplier: VWR Chemicals

Certified reference materials for use as standards for Total Nitrogen, typically used as standards for Kjeldahl nitrogen determination.

Supplier: VWR Chemicals

Avantor now offers a comprehensive range of osmolality standards as Certified Reference Materials (CRM) for the calibration of osmometers.

Intended use:

Supplier: VWR Chemicals

Avantor offers an extensive range of FAME standards as Certified Reference Materials under the well-known PESTINORM® brand.

Supplier: VWR Chemicals

Avantor offers a comprehensive range of conductivity standards as Certified Reference Materials with the primary use calibrating of conductivity meters.

Supplier: VWR Chemicals

Distillation Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for distillation at atmospheric pressure according to ASTM D86, IP 123, ISO 3405 and other such equivalent international methodology.

Supplier: VWR Chemicals

Cold Filter Plugging Point (CFPP) Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cold Filter Plugging Point (CFPP) according to IP 309, EN 116 and ASTM D6371 also other equivalent test methodology.

Supplier: VWR Chemicals

This certified reference material is produced using a high-purity starting material, acid from sub-boiling and 18 MOhm deionised water.

Supplier: VWR Chemicals

Flash point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for TAG Closed Cup (ASTM D56).

Supplier: VWR Chemicals

Organic Standard, Endosulfan, mixed isomers neat CRM, Pack type: Glass ampoule

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Octane Number.

Supplier: VWR Chemicals

CRM's - secondary reference materials intended for standardisation of volumetric solutions in accordance with the Pharmacopoeia (Ph. Eur. and USP). These volumetric standards are prepared from high purity salts. Certified mass fraction is determined by classical analysis according to ISO/IEC 17025. Homogeneity and stability studies have been performed according to the requirements of ISO 17034 and ISO Guide 35. All volumetric standards are traceable to SI (NIST or BAM).

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Smoke Point ASTM D1322 / IP 57.

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Cetane Number ISO 5165 / EN 61715.

Supplier: VWR Chemicals

Flash point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Abel Closed Cup (IP 170, ISO 13736).

Supplier: VWR Chemicals

Polysulphide CRMs are suitable for calibration, verification, or for use in quality control procedures used for analysing sulphur content in petroleum products.

Supplier: VWR Chemicals

Pour Point Certified Reference Materials for the verification of laboratory instruments used in testing petroleum and derivative products for Pour Point to ASTM D97, IP 15, ISO 3016 and other equivalent international test methodologies.

Supplier: VWR Chemicals

Fuel testing Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products. This includes, but is not limited to, the analysis and measurement of: Acidity content, sulphur content, aniline point, Fluorescent Indicator Adsorption (FIA) aromatics, freezing point.

Supplier: VWR Chemicals

MPCRM’s provide both calibration and verification options for laboratory test equipment, all from the same sample, with their values certified to the highest level of accreditation integrity available globally.

Supplier: VWR Chemicals

This range of relative density standards are certified in accordance with primary level ASTM D1480 methodology, and are dual-certified to ISO 17025 / ISO 17034 under UKAS accreditation. Relative Density standards are designed for the calibration or verification of instruments used to measure density and relative density of materials at the desired test temperature within the range of 15 to 25 °C.