You searched for: Microplate Seals

Supplier: VWR Collection

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: VWR Collection

Adhesive sealing film or foil rolls constructed on plastic cores, for use with high throughput automated microplate sealers.

Supplier: VWR Collection

Square well cap mats for sealing 96-well shallow or deep well plates.

Supplier: VWR Collection

Easily pierceable 94,1 µm thick PE films with acrylic adhesive allow direct sample recovery with singe- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: VWR Collection

Polyester seals feature a strong adhesive to minimize evaporation during PCR and storage applications.

Supplier: VWR Collection

VWR®, Microplate seal, Cap strip, Single sheet/mat/strip, Cap strip for PCR plates and tube strips, dome, Non sterile

Supplier: VWR Collection

VWR® PCR membranes are DNAse- and RNAse-free.

Supplier: VWR Collection

Sealing mats made of EVA (Ethylene Vinyl Acetate), suitable for square well plates.

Supplier: VWR Collection

Aluminum foils for use with 96-well or 384-well plates. Foils offer excellent chemical resistance (DMSO).

Supplier: VWR Collection

Polyester 2×8 strip films are identical to polyester films in material and adhesive, but designed for sealing only one or two 8-well rows at a time on either strip-well plates or standard plates whenever rows must be selectively protected or accessed. Sterile product is packed in tamper-evident bags of 50/bag.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Capmat for J.T.Baker® Plate Medio, Well top shape: Round, EVA, Transparent, Non-pierceable, Non sterile

Supplier: VWR Collection

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR Collection

Transparent silicone mats fit most brands of 96-well PCR plates.

Supplier: VWR Collection

These 50 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with tissue culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: VWR Collection

Pre-cut aluminum foil seals on a roll for PCR applications. Supplied on a roll with holder for ease of use.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (48 wells), Single sheet/mat/strip, Capmat for J.T.Baker plate square well 48, Well top shape: Square, EVA, Transparent, Pierceable, Non sterile

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: VWR Collection

Polyester film with acrylic adhesive. These non pierceable films in sheeted-roll format are recommended for ELISA tests, general incubation and short-term storage.