1070 Results for: "VACUUBRAND"

Supplier: VACUUBRAND

Small flanges made of stainless steel with sealing ring made of NBR.

Supplier: VACUUBRAND

Power cables for Peltronic® exhaust vapour condenser and vacuum controllers VNC 2.

Supplier: VACUUBRAND

VKW-B coolant valve, VACUU BUS, DN 1.5 mm, input G3/4"/G1/2", output of hose nozzle 6 mm, cable length 2 m

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: VACUUBRAND

Maintenance kit, RC 6

Supplier: VACUUBRAND

Vacuum pump units with a two or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

For use in explosive areas chemistry diaphragm pumps category 2 with ATEX conformity are available.

Supplier: VACUUBRAND

Chemistry design diaphragm pumps are ideal for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of medium pumping speed and low ultimate vacuum.

Supplier: VACUUBRAND

Vacuum pump units with a two- or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

PC 500 LAN NT and PC 600 LAN NT. Chemistry vacuum pump units that are ready for connection, optimised for automatic, demand-sensitive vacuum generation in local vacuum networks e.g. VACUU•LAN®.

Supplier: VACUUBRAND

Vacuum pump units with a two or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

Small flanges made of stainless steel with sealing ring made of NBR.

Supplier: VACUUBRAND

These straight-through valves with electromagnetic (solenoid) drive are used for operating cycles with short intervals and it is often used as vacuum control valves. The straightforward design provides a valve with low leakage rate.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Chemistry hybrid pump, RC 6

Supplier: VACUUBRAND

PTFE vacuum hose is antistatic. The inner side of the PTFE hose is smooth for increased chemical resistance, reduced deposits, and high conductance.

Supplier: VACUUBRAND

These small flanges with thread made of stainless steel.

Supplier: VACUUBRAND

Accessories for rotary vane pumps, RE/RZ

Supplier: VACUUBRAND

Vacuum diaphragm pump, Conversion kit for remote pump control with CVC 3000

Supplier: VACUUBRAND

This very compact chemistry pumping unit is an excellent solution when working with high boiling solvents. Typical applications are vacuum generation for rotary evaporators, vacuum concentrators and filtrations. With the continuously variable jog wheel, the pumping speed is manually adjustable to the process requirements. There are two optional kits available to easily upgrade the PC 3001 basic to the fully functional PC 3001 VARIOpro complete with CVC 3000 vacuum controller, inlet separator and vapor condenser at the outlet (please contact Avantor for further information).

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Exhaust vapor condenser EK 600; with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE®, connection for cooling water: 2×hose nozzle DN 6 - 8 mm, exhaust: hose nozzle DN 19 mm

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: VACUUBRAND

These high vacuum pumping units are highly uselful in successful and time-saving work in many science laboratories. The powerful rotary vane backing pumps generate the necessary backing pressure so that the diffusion pump can always attain its full pumping speed and an ultimate vacuum of approx. 10^-6 mbar (measured with pump fluid DC 704 and cold trap with liquid nitrogen). The pumping unit HP 40B2 with RZ 6 provides higher pumping speed in the pump down phase and is additionally equipped with an oil mist filter FO.

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Supplier: VACUUBRAND

High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND

This four-stage chemistry-design diaphragm pump is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0,9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life.