2979 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

Precolumn filters, PEEK bodies and PCTFE-surrounded PEEK frits.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC

These high quality stainless steel sample loops have burr-free, square-cut ends to ensure a flush connection to valve ports.

Supplier: UPCHURCH SCIENTIFIC

These are made up of PEEK™ polymer and stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: UPCHURCH SCIENTIFIC

Designed to cut capillary-sized polymer tubing.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: UPCHURCH SCIENTIFIC

Precision cutter for fused silica tubing ensures clean, trouble free cutting of fused silica tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-333N, fitting and sleeves, long, PEEK natural/ETFE natural, headless knurl, 10-32 coned port, for 1/16" OD tubing, 4000 psi

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-700 VHP MicroTee for 1/32" OD tubing, 5/16-24 coned threads, 0,25 mm thru-hole, 84 nl swept volume, PEEK/stainless steel, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Placed between pump and sample injection valve to trap particles released through normal piston seal wear.

Supplier: UPCHURCH SCIENTIFIC

FEP.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: UPCHURCH SCIENTIFIC

PEEK, stainless steel or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Bottom-of-the-Bottle™, A-427 replacement solvent filter cups, UHMWPE

Supplier: UPCHURCH SCIENTIFIC

Made from high quality, polyimide-clad fused silica.

Supplier: UPCHURCH SCIENTIFIC

Designed to accurately split and control the low flow stream of a single incoming supply.

Supplier: UPCHURCH SCIENTIFIC

These in-line MicroFilters effectively protect columns from particles originating in the mobile phase or sample, or from pump seal and sample injection valve wear.

Supplier: UPCHURCH SCIENTIFIC

The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.