Supplier: Restek

These purge and trap spargers are designed for use with Tekmar purge-and-trap instruments only and manufactured to tight tolerances to ensure a leak-tight seal.

Supplier: Restek

Resprep tubes, frits, caps, and connectors for method development needs.

Supplier: Restek

The MiniPulse pulse damper is ideal for the applications where minimising the total system volume is critical.

Supplier: Restek

The flat filter element sits parallel to the bottom of the mobile phase reservoir, allowing the filter to draw 98% of the mobile phase without drawing air into the system. Conventional cylindrical mobile phase filters begin to draw air into the system when approximately 10% of the solvent remains in the reservoir.

Supplier: Restek

QuEChERS dSPE tubes are used for extract cleanup. It is fast, simple sample Prep for multiresidue pesticide analysis. It has a advantage that no glassware required and it is ready to use. It can be individually labelled for easy sorbent identification and the tubes are preweighed with ultra pure sorbents.

Supplier: Restek

Rtx-200 columns have accomplished many difficult separations. The trifluoropropylmethyl polysiloxane stationary phase has a unique selectivity that changes elution orders and resolves compounds that phenyl, cyano, or carbowax phases can not. These columns offer exceptional thermal stability, low bleed, and superior inertness - even for active compounds such as phenols, and with sensitive detectors such as ECDs, NPDs, and MSDs.

Supplier: Restek

Q-sep™ QuEChERS provides fast, simple sample preparation for multi residue pesticide analysis.

Supplier: Restek

MXT®-1301 Siltek®-treated stainless steel columns are general purpose columns for residual solvents, alcohols, oxygenates, and volatile organic compounds.

Supplier: Restek

This mix contains four components.

Supplier: Restek

Organic Standard, Hexachlorobenzene, 1 ml/ampoule

Supplier: Restek

Organic Standard, 2,4'-DDT, 1 ml/ampoule

Supplier: Restek

Organic Standard, δ-BHC, 1 ml/ampoule

Supplier: Restek

Organic Standard, PCB congener standard, 1 ml/ampoule

Supplier: Restek

Organic Standard, Propachlor , Pack type: Glass bottle

Supplier: Restek

502.2 VOA calibration kit #2 contains 502.2 calibration mx #1: bromomethane (methyl bromide), chloroethane (ethyl chloride), chloromethane (methyl chloride), dichlorodifluoromethane (CFC-12), trichlorofluoromethane (CFC-11), vinyl chloride; 502.2 MegaMix standard: benzene, bromobenzene, bromochloromethane, bromodichloromethane, bromoform, n-butylbenzene, sec-butylbenzene, tert-butylbenzene, carbon tetrachloride, chlorobenzene, chloroform, 2-chlorotoluene, 4-chlorotoluene, dibromochloromethane, 1,2-dibromo-3-chloropropane , 1,2-dibromoethane, dibromomethane, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, 1,1-dichloroethane, 1,2-dichloroethane, 1,1-dichloroethene, cis-1,2-dichloroethene, trans-1,2-dichloroethene, 1,2-dichloropropane, 1,3-dichloropropane, 2,2-dichloropropane, 1,1-dichloropropene, cis-1,3-dichloropropene, trans-1,3-dichloropropene, ethylbenzene, hexachloro-1,3-butadiene , isopropylbenzene , 4-isopropyltoluene , methylene chloride , naphthalene, n-propylbenzene, styrene, 1,1,1,2-tetrachloroethane, 1,1,2,2-tetrachloroethane, tetrachloroethene, toluene, 1,2,3-trichlorobenzene, 1,2,4-trichlorobenzene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethene, 1,2,3-trichloropropane, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene, p-xylene.

Supplier: Restek

502.2 VOA calibration kit #2 contains 502.2 calibration mix #1: bromomethane (methyl bromide), chloroethane (ethyl chloride), chloromethane (methyl chloride), dichlorodifluoromethane (CFC-12), trichlorofluoromethane (CFC-11), vinyl chloride; 502.2 MegaMix standard: benzene, bromobenzene, bromochloromethane, bromodichloromethane, bromoform, n-butylbenzene, sec-butylbenzene, tert-butylbenzene, carbon tetrachloride, chlorobenzene, chloroform, 2-chlorotoluene, 4-chlorotoluene, dibromochloromethane, 1,2-dibromo-3-chloropropane , 1,2-dibromoethane, dibromomethane, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, 1,1-dichloroethane, 1,2-dichloroethane, 1,1-dichloroethene, cis-1,2-dichloroethene, trans-1,2-dichloroethene, 1,2-dichloropropane, 1,3-dichloropropane, 2,2-dichloropropane, 1,1-dichloropropene, cis-1,3-dichloropropene, trans-1,3-dichloropropene, ethylbenzene, hexachloro-1,3-butadiene , isopropylbenzene , 4-isopropyltoluene , methylene chloride , naphthalene, n-propylbenzene, styrene, 1,1,1,2-tetrachloroethane, 1,1,2,2-tetrachloroethane, tetrachloroethene, toluene, 1,2,3-trichlorobenzene, 1,2,4-trichlorobenzene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethene, 1,2,3-trichloropropane, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene, p-xylene.

Supplier: Restek

The california oxygenates mix consists of five components they are tert-amyl methyl ether (TAME) 2000 μg/ml, tert-butanol (TBA) 10000 μg/ml, diisopropyl ether (DIPE) 2000 μg/ml, ethyl-tert-butyl ether (ETBE) 2000 μg/ml and methyl tert-butyl ether (MTBE) 2000 μg/ml.

Supplier: Restek

The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Organic Standard, 2-Propanol, 1 ml/ampoule

Supplier: Restek

MXT®-65TG columns are application-specific columns, specially tested for triglycerides.

Supplier: Restek

This mix contains eight components.

Supplier: Restek

This mix contains eight components.

Supplier: Restek

These filter are made of cellulose or glass fibre. Ideal for ASE® 200 extraction cells.

Supplier: Restek

It separate mixes for surrogates and internal standard.

Supplier: Restek

Organic Standard, 1,2-Dichloroethane-[D4] 2,000 µg/ml in methanol, Pack type: Glass ampoule

Supplier: Restek

These inserts can be used with 4 ml WISP 48 screw thread step vials.

Supplier: Restek

This filtration apparatus are with fritted glass support that is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers. The support base has a coarse-porosity glass frit and an integral vacuum connection, located above the drip tip to prevent contamination of the vacuum line with filtrate droplets.

Supplier: Restek

Valco®, Zero dead volume tee, Siltek®/Sulfinert® treated, 1/16”, Siltek® treated stainless steel

Supplier: Restek

Chromatography vial closure, Silicone/PTFE, Caps and septa, top hat, Septum: PTFE/silicone

Supplier: Restek

Organic Standard, Pyridine 2,000 µg/ml in methanol, Pack type: Glass ampoule