3831 Results for: "3-Methoxybenzyl+chloride&pageNo=57"

Supplier: Air Liquide

These vessels are designed for long term storage of biological samples in straws, cryo-vials and bags. A variety of electronic options on all models rack or canister storage systems for the samples.
Made of aluminum and composite materials.

Supplier: KEYSTONE CLEANROOM PRODUCTS

PureClean™ self-sealing autoclave bags are made from a transparent film and 1421B DuPont™ Tyvek®, which is a new grade of uncoated, untreated, flexible Tyvek® material specifically designed for pharmaceutical use in steam sterilisation applications. Uncoated Tyvek® eliminates the potential of residue deposits on equipment, post sterilisation.

Supplier: VWR Collection

These trousers are manufactured from 99% polyester fibres and 1% Hydro-Tec fibres. The special fabric, with Hydro-Tec nanotechnology finish, makes the trousers extremly durable and provides anti-static features as well as protection against dirt, oil, chemicals and water.

Supplier: VWR Collection

30 or 60 layer adhesive entrance mats manufactured from low density polyethylene. These mats control contamination by removing debris from the soles of shoes, and the wheels of transport containers. When one layer is dirty, simply remove by the numbered corner tab, leaving a fresh layer ready for use.

Supplier: CHIRAL TECHNOLOGIES

These columns allow chromatographers to employ essentially any organic solvent as mobile phase to develop methods for the most challenging separations. These columns are available in a variety of particle sizes and offer great speed and column resolving power. Columns packed with 3 µm CSPs offer high speed separations and a reduction in analysis time and cost per sample. Columns, packed with 3 µm particles, may be used in conventional HPLC units without significant loss in performance, even with the smaller column dimensions.

Supplier: Sartorius

Binder free glass microfibre filters are made of 100% borosilicate, are highly pure and extremely white. They are recommended for analytical and gravimetric analyses and also as prefilters. These filters combine fast flow rates with high load capacity and the retention of very fine particles.

Supplier: FRISTADS KANSAS

Durable trousers made of 65% polyester and 35% cotton.

Supplier: FRISTADS KANSAS

Overalls made from 65% polyester, 35% cotton, with soft nap on reverse side.

Supplier: HAMILTON BONADUZ

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. The needles are 304 stainless steel. Custom needle lengths and point styles are available.

Supplier: LEICA MICROSYSTEMS

The objective lens is a critical part of the microscope optics. The microscope objective is positioned near the sample, specimen, or object being observed. It has a very important role in imaging, as it forms the first magnified image of the sample.

Supplier: Merck

Ascentis® Express C18 high-speed, high-performance liquid chromatography columns are based on the highly efficient Fused-Core® particle design.

Supplier: FRISTADS KANSAS

Trousers made of Canvas (65% cotton, 35% polyester).

Supplier: Avantor

Avantor® ACE® C18-300 columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative. These columns are designed for a wide range of chromatographic applications, to provide great performance with acidic, basic and neutral molecules.

Supplier: VWR Chemicals

Due to its excellent separation capacity and its high sensitivity gas chromatography is a widely used technique for analytical purposes. In order to get proper identification and quantification results of the analysed compounds, reference standards are needed. These PESTINORM® reference substances can be used for the characterisation of GC column properties. In addition they may also be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis.

Supplier: Avantor

Avantor® ACE® HILIC method development kits offer all three Avantor® ACE® proprietary HILIC phases (HILIC-A, HILIC-B and HILIC-N) in one kit. These phases offer alternative HILIC selectivity to each other, and have been developed to enable chromatographers to achieve reproducible and successful HILIC separations using a systematic approach to method development.

Supplier: Avantor

Vydac TP is the first range of wide pore media phases developed in the Vydac range and it is the industry's standard for peptide and protein separations. The large pores of the 300 Å TP silica give polypeptide molecules complete access to the interior of the silica pores.

Supplier: Avantor

The Avantor® ACE® C18-AR phase utilises a specially developed ligand combining a C18 chain with integral phenyl functionality, thus combining the benefits of both C18 and phenyl characteristics into a single phase. This can be used for ‘standard’ C18 column separations, but is additionally recommended for separations that involve compounds containing aromatic functionality.

Supplier: Avantor

The Avantor® ACE® C18-AR phase utilises a specially developed ligand combining a C18 chain with integral phenyl functionality, thus combining the benefits of both C18 and phenyl characteristics into a single phase. This can be used for ‘standard’ C18 column separations, but is additionally recommended for separations that involve compounds containing aromatic functionality.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self-sealing Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.

Supplier: FRISTADS KANSAS

Vest made from 65% polyester and 35% cotton; napped inner.

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimised to provide the most consistent results with less extractables.

Supplier: Thermo Fisher Scientific

Rigid PC frame, thin-walled PP wells. Ultra-rigid 96-well PCR plates with rounded V-bottom wells designed for robotic applications.

Supplier: Avantor Fluid Handling

PMAT ANALOG OUTPUT CABLE 6FT 1 * 1 items

Supplier: Avantor Fluid Handling

FITTING MAXI FLANGEXB 1 PVDF 1 * 1 items

Supplier: VWR Collection

These anti-static coats are manufactured from 99% polyester fibres with 1% Hydro-Tec finish (carbon treated), which makes them both extremely durable and excellent for repelling dirt, oil, chemicals and water. All coats feature a stand-up collar, two side pockets and one breast pocket, all three protected by a flap.

Supplier: FRISTADS KANSAS

Gilets made from 65% polyester and 35% cotton; napped inner.

Supplier: FRISTADS KANSAS

These short trousers are made of 65% polyester and 35% cotton, with a soft nap on the reverse side. OEKO-TEX® certified.

Supplier: FRISTADS KANSAS

Functional vests made from 65% polyester and 35% cotton; napped inner.

Supplier: FRISTADS KANSAS

Industrial jacket made of 65% polyester and 35% cotton, with soft nap on reverse side. The black jacket is available with different accent and piping colours.

Supplier: FRISTADS KANSAS

Two-colour working trousers with contrast stitching, made of 65% polyester and 35% cotton.