Order Entry
Italy
ContactUsLinkComponent
77 results for Chromatography Standards

You searched for: Chromatography Standards

Frequently used for calibration, the chromatography standards have a known concentration to test separating equipment for performance faults. Analytical equipment error would impact the dependability of retention time, purity, molecular weight, and compound identification conclusions. Improving data quality, the substances allow personnel to plot analyte signal ratios and obtain concentrations from a calibration curve. Chromatography standards verify instruments are suitable for intended ion exchange, gel filtration, and hydrophobic interaction procedures.

Sort By

Poly(2-vinylpyridine), analytical standards, Supelco®

Supplier: Merck

GPC Standard, Mw 37,500 (Typical), Supelco®, Glass bottle

Expand 3 Items
Loading...

Poly(Bisphenol A carbonate), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(Bisphenol A carbonate), Supelco®, Analytical standard

Expand 1 Items
Loading...

Test mixture 2 for apolar capillary columns according to Grob, for GC

Supplier: Merck

Standard for GC, Test mixture 2 for apolar capillary columns according to Grob, Supelco®, ready-to-use

Expand 1 Items
Loading...

Polystyrene, average Mw 290000 (typical), average Mn 130000 (typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Polystyrene, average Mw 290000 (typical), average Mn 130000 (typical), Supelco®, Analytical standard

Expand 1 Items
Loading...

Poly(dimethylsiloxane), average Mw 95000 (Typical), average Mn 50000 (Typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(dimethylsiloxane), average Mw 95000 (Typical), average Mn 50000 (Typical), Supelco®, Analytical standard

Expand 1 Items
Loading...

Poly(lauryl methacrylate) solution, Mw 570000 (Typical), average Mn 290000 (Typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(lauryl methacrylate) solution, Mw 570000 (Typical), average Mn 290000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard

Expand 1 Items
Loading...

Poly(vinyl chloride), average Mw 85000 (Typical), average Mn 40000 (Typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(vinyl chloride), average Mw 85000 (Typical), average Mn 40000 (Typical), Supelco®, Analytical standard

Expand 1 Items
Loading...

Poly(methyl methacrylate) PMMA, analytical standard, for GPC

Supplier: Merck

Poly(methyl methacrylate) is a rigid and transparent type of polymer material. It is obtained via polymerization of methyl methacrylate monomer.

Expand 10 Items
Loading...

Poly(ethylene glycol) analytical standards, for GPC, Supelco

Supplier: Merck

Poly(ethylene glycol) is the most widely used non-ionic, hydrophilic polymer, which can find wide applications in biomedical industry such as in drug delivery systems.

Expand 1 Items
Loading...

Reversed phase test mix, in methanol: water (3:2) (varied conc.), certified reference material, Supelco®

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix, in methanol: water (3:2) (varied conc.), TraceCERT®, Supelco®, Certified reference material, Pk Info: ampule of 1 mL

Expand 1 Items
Loading...

Polystyrene, analytical standards for GPC

Supplier: Merck

GPC Standard, Mw 2000000 (typical), Supelco®

Expand 23 Items
Loading...

Poly(styrenesulfonic acid sodium salt) analytical standards for GPC

Supplier: Merck

GPC Standard, ~10600 Mw, Mw/Mn ≤1,20, Supelco®

Expand 9 Items
Loading...

Polyethylene analytical standards, for GPC

Supplier: Merck

GPC Standard, ∼2010 Mw, Mw/Mn ~1,12, Supelco®

Expand 1 Items
Loading...

Poly(acrylic acid), average Mn 130000 (Typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(acrylic acid), average Mn 130000 (Typical), Supelco®, Analytical standard

Expand 1 Items
Loading...

HPLC standards, LiChroTest®, Supelco®

Supplier: Merck

Standard samples for HPLC System Qualification.

Expand 6 Items
Loading...

Dimethylpolysiloxane set of analytical standards, molecular weight series

Supplier: Merck

Clear, colorless fluid polymer useful as a stationary phase in gas chromatography and as an anti-foaming agent.

Expand 1 Items
Loading...

HPLC isocratic systems diagnostics mix, in methanol: water (3:2) (varied concentration), certified reference material, Supelco®

Supplier: Merck

This formulation is designed for evaluating how reliably a chromatographic system is providing such fundamentally important parameters as flow rate, proportioning, and mixing.

Expand 1 Items
Loading...

Poly(methacrylic acid sodium salt) analytical standards, for GPC, Supelco®

Supplier: Merck

GPC Standard, ~18600,Mw, Mw/Mn <1,20, Supelco®

Expand 3 Items
Loading...

Poly(butylmethacrylate), analytical standard, for GPC

Supplier: Merck

GPC Standard, ∼682000 Mn, Mw/Mn ~1,06, Supelco®

Expand 1 Items
Loading...

Reversed phase test mix 2, certified reference material, Supelco®

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix 2, TraceCERT®, Supelco®, in acetonitrile: water (varied conc.) solution, Certified reference material, Pk Info: ampule of 1 mL

Expand 1 Items
Loading...

Polyethylene glycol Standard ReadyCal Set Mp 102-40′000, for GPC

Supplier: Merck

Set contains 12 different polyethyleneglycol standards with Mp ~106, ~330, ~420, ~600, ~1500, ~2010, ~3120, ~6240, ~8600, ~12000, ~23000, ~40000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations

Expand 1 Items
Loading...

Poly(α-methylstyrene) analytical standards, for GPC

Supplier: Merck

Poly(α-methylstyrene) may find applications as a radical producing agent, in the thermal degradation of polystyrene.

Expand 3 Items
Loading...

Poly(Bisphenol A carbonate) analytical standards kit, molecular weight series, for GPC

Supplier: Merck

Poly(Bisphenol A carbonate) (PC) is a thermoplastic material. It is injected in molding operations and is majorly studied to understand its thermal behaviour, especially thermal degradation property.

Expand 1 Items
Loading...

Nucleosides test mix, analytical standard, Supelco®

Supplier: Merck

HPLC Standard, Nucleosides Test Mix, Supelco®, in 1% sodium formate (varied conc.), Analytical standard, Pk Info: ampule of 1 mL

Expand 1 Items
Loading...

Poly(butyl acrylate) solution, Mw 60000 (Typical), average Mn 20000 (Typical), analytical standard, Supelco®

Supplier: Merck

GPC Standard, Poly(butyl acrylate) solution, Mw 60000 (Typical), average Mn 20000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard

Expand 1 Items
Loading...

Polar column test mix, certified reference material, Supelco®

Supplier: Merck

Polar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL each component in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL

Expand 1 Items
Loading...
Reference substances for GC analysis, Supelco®

Reference substances for GC analysis, Supelco®

Supplier: Merck

Reference substances can be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis. They serve also for the characterisation of GC column properties.

Expand 3 Items
Loading...

Poly(dimethylsiloxane) analytical standard, for GPC

Supplier: Merck

Poly(dimethylsiloxane) [PDMS] is a polymer. It is a stable silicone rubber. It has been used as ion selective membrane for ion-sensitive field-effect transistors, as spring material in accelerometers, elastomer on a tactile sensor and as flexible encapsulation material in decouple sensors.

Expand 1 Items
Loading...

Programmed test mix, in dichloromethane (varied conc.), certified reference material, Supelco®

Supplier: Merck

This test mix is based on the comprehensive mix developed by Grob (Grob, et al., J. Chromatogr. 156 (1978) p. 1)

Expand 1 Items
Loading...

Polystyrene standard ReadyCal set Mp 400-2000000, analytical standards for GPC

Supplier: Merck

Set contains 12 different polystyrene standards with Mp ~374, ~1620, ~3420, ~9130, ~18100, ~32500, ~67500, ~128000, ~246000, ~659000, ~1000000, ~2180000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations.

Expand 1 Items
Loading...
Sort By
Recommended for You