You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
PFA Straight Threaded Couplings, NPT (F)
Supplier: Avantor Fluid Handling
Create a secure pipe threaded connection.
Expand 5 Items
Masterflex® Adapter Fittings, Compression to Female Threaded, Straight, Avantor®
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 2 Items
Pipe fittings, elbows, PureBond®
Supplier: ENTEGRIS
These pipe fittings are made from PFA.
Expand 5 Items
CPC® Miniature Quick-Disconnect Fittings, Threaded Bodies
Supplier: Avantor Fluid Handling
No more kinked tubing—allows tubing to rotate freely.
Expand 2 Items
Venture Tech Sanitary Clamp Tee Fittings, PFA
Supplier: Avantor Fluid Handling
Ideal for extremely corrosive materials—PFA will not rouge or pit.
Expand 2 Items
Masterflex® Adapter Fittings, Compression to Male Threaded, Elbows, Avantor®
Supplier: Avantor Fluid Handling
Maintain a permanent connection with these adapters.
Expand 2 Items
End caps, sanitary fitting, Nalgene®
Supplier: Thermo Fisher Scientific
Nalgene®, End cap with sanitary fittings, 3" flange, white, PP, Hole Ø: 2×3/4" mm
Expand 2 Items
CPC® Non-Spill Quick-Disconnect Fittings, Bodies and Inserts
Supplier: Avantor Fluid Handling
Stop leaks in your line - spillage as low as 0,10 ml.
Expand 9 Items
Venture Tech PFA Sanitary Clamps, 90° Elbow
Supplier: Avantor Fluid Handling
Ideal for extremely corrosive materials—PFA will not rouge or pit.
Expand 1 Items
AseptiQuik® X connectors
Supplier: CPC COLDER
AseptiQuik® X large format 1" connectors provide quick and easy sterile connections for high flow applications, even in non-sterile environments. The 'Twist-Pull-Twist' design enables users to quickly transfer large volumes of media easily with less risk of operator error.
Expand 2 Items
Unions for capillary HPLC columns, ProteCol™
Supplier: Trajan Scientific and Medical
Capillary LC, ProteCol™ unions offer complete versatility for connecting a range of capillary tubing.
Expand 18 Items
CPC® Miniature Quick-Disconnect Fittings, Panel-Mount Hose Barb Bodies
Supplier: Avantor Fluid Handling
No more kinked tubing - allows tubing to rotate freely.
Expand 4 Items
Tubing couplings, rapid, NW 6,4 mm
Supplier: BURKLE
Spring/lock Stainless steel V4A
Expand 43 Items
Thread adaptors TYPE C, b.safe
Supplier: Bohlender
All adaptors of this type are supplied with two female threads and recessed grips.
Expand 6 Items
CPC® High-Flow Quick-Disconnect Fittings, GHT (M) Bodies and Inserts
Supplier: Avantor Fluid Handling
No more leaks—valved couplings automatically shut off flow.
Expand 1 Items
Stainless Steel Male Threaded Elbow to Push-to-Connect Adapters
Supplier: Avantor Fluid Handling
The ease of push-to-connect and the durability of 316 stainless steel.
Expand 3 Items
One-piece front and back ferrules, OGF
Supplier: Trajan Scientific and Medical
These reusable ferrules are made from 100% graphite. They have a temperature limit of 450 °C.
Expand 25 Items
Quick couplings, b.safe
Supplier: Bohlender
Two-part tubing coupling made of PP with PFA Fitting to connect capillaries with Ext.Ø. 3,2 mm. The passage with the integrated quick lock is tightly closed through loosening the coupling. Tubing connections are easily interrupted without dripping from the tube, tubes and removal flasks are tightly closed during exchange. Version and scope of delivery as per below chart.
Expand 5 Items
Pipe connector, ferrule lock, for gas cylinder
Supplier: TCI
Pipe connector, in solid state at 20 °C.
Expand 1 Items
Vespel® Graphite GC Ferrules
Supplier: Trajan Scientific and Medical
Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.
Expand 54 Items
BarbLock™ Ultra-Secure Tubing Retainers
Supplier: Saint Gobain Life Sciences
When it comes to retaining flexible tubing and hose onto barbed fittings, BarbLock™ retainers have become the standard in many industries because they solve inherent leak path problems in sensitive and demanding applications. The retainer uses no adhesives or solvents, is ideal for systems transferring delicate liquids or gases.
Expand 6 Items
GC ferrules, SilTite™ FingerTite
Supplier: Trajan Scientific and Medical
Designed to be installed only with the force of your fingers delivering an easy, leak-free installation for capillary columns without the use of any tools. Developed with the unique, leak- and air-free properties of SilTite™ ferrules, which results in superior air tightness to reduce background noise in sensitive MS applications.
Expand 22 Items
Distributor for capillaries, b.safe
Supplier: Bohlender
Distributor for connection of capillary tubing. With PFA Fittings for capillaries with Ext.Ø 3,2 mm (thread UNF ¹/₄").
Expand 1 Items
AseptiQuik® Sterile Connector Cuffs
Supplier: CPC COLDER
AseptiQuik® connector cuffs provide additional support for more robust applications, so users can continue to transfer media easily with these quick and easy to use AseptiQuik® sterile connectors.
Expand 6 Items
Tubing connectors, straight
Supplier: Lenz Laborglas GmbH & CO.KG
Tubing connectors made of DURAN® borosilicate glass, straight with two glass olives.
Expand 4 Items
Connectors, tubing, stainless steel, GL 45, DURAN®
Supplier: DWK Life Sciences
Tubing connection system with two or three top connectors are designed to be used with all sizes of DURAN® GL 45 laboratory and media bottles. These connectors are slightly splayed to facility easier attachment of the tubing.
Expand 3 Items
Hose connectors, with nut
Supplier: Bohlender
GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.
Expand 6 Items
Elbow connector for waste pipes, b.safe
Supplier: Bohlender
Elbow tube approx. 90° made of static dissipative PE-EX.
Expand 2 Items
MPC series ¹/₄" flow, quick disconnect coupling for bio and pharma
Supplier: CPC COLDER
These ¹/₄" flow quick disconnect couplings are manufactured specifically for the bio and pharma markets.
Expand 15 Items
Threaded fittings
Supplier: BURKLE
Container connection, with outer thread, PP, Thread: 12,7 mm
Expand 50 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT BIOQUEST
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One