You searched for: Fittings and Connectors

Supplier: Avantor

The HI-065 female-female connector consists of a 60 mm length of 1/16" (0,007 mm) PEEK tubing with PEEK fingertight fittings and is suitable for connecting to all end fittings.
The HI-061 male-male connector provides an ultra low dead volume and comes complete with two PEEK end fittings.

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors of elastic tubing with different inner diameters.

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing (e.g. Viton®, Tygon®, silicone).

Supplier: Bohlender

Fitting made of PTFE for transition of Tri-Clamp as per DIN 32 676 to a hose connector.

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing with different inner diameters.

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors for elastic tubing.

Supplier: Bohlender

Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.

Supplier: Bohlender

The Cross-shaped fitting, made of PTFE with four connectors for elastic tubing.

Supplier: Bohlender

Y-shaped fitting made of PP, with three hose connectors for elastic tubing.

Supplier: CPC COLDER

These high flow couplings feature automatic shut-off valves which stop flow and eliminate the need for pinch clamps, stainless steel connectors or fittings.

Supplier: CPC COLDER

FitQuik™ Connectors from Colder Products Company are high quality fittings for leak-free tubing connections. These precision molded fittings are designed to eliminate tubing leak points in applications such as medical devices, analytical instrumentation or air-driven equipment.

Supplier: Bohlender

Fittings made of PE to fix tubing in the capillary connectors (thread UNF ¹/₄" 28G) of b.safe Caps PFAS Analytic.

Supplier: Bohlender

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Supplier: Bohlender

Straight fitting, made of PTFE, with one connector for elastic tubing (e.g. Viton®, Tygon®, silicone) and one screw-in thread (either NPT or G).

Supplier: Bohlender

Central waste collection from several HPLC systems. Capillaries and hoses are connected without kinks using the b.safe Fittings and b.safe Hose connectors included in the scope of delivery. The liquid solvent waste flows off directly and residue-free via the vertical hole inside the Desktop Distributor.

Supplier: COWIE

T-type connectors, made of PTFE, bayonet type, for tubings.

Supplier: Avantor Fluid Handling

Best for low-pressure applications.

Supplier: Avantor Fluid Handling

Provide easy, secure sterile connections even in nonsterile environments now in newly engineered larger sizes.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

Quick, leakproof connection.

Supplier: Avantor Fluid Handling

Provide easy, secure, sterile connections even in nonsterile environments.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

No tools needed for assembly.

Supplier: Avantor

PEEK HPLC column inlet / outlet connectors. These column connectors are designed for use at both the column inlet and outlet ends. They are suitable for use with ¹/₁₆" ext.Ø tubing and all manufacturers' HPLC systems and all brands of HPLC columns.

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: Avantor Fluid Handling

Best for low-pressure applications.

Supplier: Avantor Fluid Handling

Provides easy single-handed disconnection.