Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Cole Parmer

Get high purity water with all-glass construction.

Supplier: Cole Parmer

Save money while maintaining high performance.

Supplier: LAUDA

Water still suitable for single distillation and for bench mounting.

Supplier: Cole Parmer

Aquatron® units have fully automatic operation direct from a potable water supply - alternatively, an optional water feed conversion kit enables connection to any pre-treated water source. The distillate storage Level control switch fits any collection reservoir. A double coil condenser and boiler system combined with a VYCOR® silica glass sheathed heating element provides exceptionally high quality pyrogen-free distillate (although distillate should be tested). These stills can also be used with the filter and deionisation units for which the water feed conversion kit (Cat. No. 171-1210) is required.

Supplier: Cole Parmer

Produces cold distilled water for immediate use.

Supplier: LAUDA

Water still (fully automatic) for double distillation, suitable for both bench and wall mounting.

Supplier: SciLabware

The QWS4 will produce 4 litres/hour of pyrogen-free* distilled water from its reliable 3kW UK manufactured, chromium plated heating element.

Supplier: Purite

These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Supplier: GLASWARENFABRIK KARL HECHT

Complete water distilling apparatus with heater and directions for use.

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.