You searched for: Water Purification Systems

Supplier: Purite

The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1 MΩhm.cm at a flow rate of up to 48 litres per hour. The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.

Supplier: Purite

The Select HP is a compact unit designed to produce a consistent supply of > 10MΩ.cm water (Type II) for HPLC, ion chromatography, atomic absorption, hydrogen generation, and clinical analyser feed. It utilises carbon pre-treatment, RO and deionisation.

Supplier: Purite

The Select Fusion is built for analytical and life science applications that need small volumes of ultrapure (Type I) water to 18,2 MΩ.cm from a mains supply, typically up to 30 L per day, in addition to purified water (Type II) for general laboratory use. The self-contained, dual quality system integrates pre-treatment, reverse osmosis, UV photo-oxidation, ion exchange and sub-micron filtration technology in a single, robust and compact enclosure. A boost pump is fitted to all models to accommodate areas of low water pressure (below 2 bar).

Supplier: Purite

The Select Analyst is a compact unit ideal for Laboratory use, delivering a steady supply of > 1MΩ.cm pure water for Laboratory tasks using carbon pre-treatment, reverse osmosis and deionisation.

Supplier: Purite

Ultrapure water for Laboratory use. Neptune requires a feedwater source that has been pre-treated to <20 µS/cm. It is suitable for analytical and Life science Laboratory applications. Three models are available in the range: Analytical, featuring a Low TOC specification; Life Science, offering Low bacteria, endotoxins and RNases/DNases specification; and Ultimate, which combines the benefits of both the Analytical and Life Science models. Each unit produces between 1,5 and 2 Litres of ultra-pure, 18,2 MΩ.cm, purified water per minute.

Supplier: Thermo Fisher Scientific

Replacement ultrafilter for GenPure™ and GenPure™ Pro water purification systems

Supplier: LABCONCO

The WaterPro® BT Water Purification System produces both RO and Type I water directly from tap water. The benchtop design is compact and lightweight so it can easily be transported from lab to lab. The Filter Pack (required, sold separately) bundles all water filter technologies into one convenient twin cartridge package so installation is simple.

Supplier: Thermo Fisher Scientific

These water purification systems convert tap water into high purity water (Type II) and provide an integrated storage solution. Designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.

Supplier: Thermo Fisher Scientific

This system combines purification with EDI technology and storage in one. Users can conveniently dispense Type 1 water directly from the system while Type 2 water is accessible from the integrated 100 l reservoir, which is an ideal supply for lab equipment such as autoclaves.

Supplier: Thermo Fisher Scientific

The Pacific TII water purification system converts tap water into Type 2 high purity water.

Supplier: LABCONCO

HPLC/Hybrid polishing kit

Supplier: Thermo Fisher Scientific

This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.

Supplier: Thermo Fisher Scientific

Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific™ Barnstead™ GenPure™ water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: Thermo Fisher Scientific

The Barnstead™ E-Pure™ is designed to connect directly to the tap water feed, and it can handle all of the laboratory high volume ultrapure water applications with low operating costs. This system is ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: MIELE

The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: VWR Collection

This compact 'plug and play' lab water system is an ideal choice for users who need up to 20 litres of ultrapure Type I water or RO water (Type III) per day. Quality of the ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: SMEG

The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.