Water Purification Systems

Supplier: LAUDA

Water still (fully automatic) for double distillation, suitable for both bench and wall mounting.

Supplier: Cole Parmer

Aquatron® units have fully automatic operation direct from a potable water supply - alternatively, an optional water feed conversion kit enables connection to any pre-treated water source. The distillate storage Level control switch fits any collection reservoir. A double coil condenser and boiler system combined with a VYCOR® silica glass sheathed heating element provides exceptionally high quality pyrogen-free distillate (although distillate should be tested). These stills can also be used with the filter and deionisation units for which the water feed conversion kit (Cat. No. 171-1210) is required.

Supplier: SciLabware

The QWS4 will produce 4 litres/hour of pyrogen-free* distilled water from its reliable 3kW UK manufactured, chromium plated heating element.

Supplier: Purite

The Select HP is a compact unit designed to produce a consistent supply of > 10MΩ.cm water (Type II) for HPLC, ion chromatography, atomic absorption, hydrogen generation, and clinical analyser feed. It utilises carbon pre-treatment, RO and deionisation.

Supplier: Purite

The Select Analyst is a compact unit ideal for Laboratory use, delivering a steady supply of > 1MΩ.cm pure water for Laboratory tasks using carbon pre-treatment, reverse osmosis and deionisation.

Supplier: Purite

The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1 MΩhm.cm at a flow rate of up to 48 litres per hour. The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.

Supplier: Purite

The Select Fusion is built for analytical and life science applications that need small volumes of ultrapure (Type I) water to 18,2 MΩ.cm from a mains supply, typically up to 30 L per day, in addition to purified water (Type II) for general laboratory use. The self-contained, dual quality system integrates pre-treatment, reverse osmosis, UV photo-oxidation, ion exchange and sub-micron filtration technology in a single, robust and compact enclosure. A boost pump is fitted to all models to accommodate areas of low water pressure (below 2 bar).

Supplier: Purite

Ultrapure water for Laboratory use. Neptune requires a feedwater source that has been pre-treated to <20 µS/cm. It is suitable for analytical and Life science Laboratory applications. Three models are available in the range: Analytical, featuring a Low TOC specification; Life Science, offering Low bacteria, endotoxins and RNases/DNases specification; and Ultimate, which combines the benefits of both the Analytical and Life Science models. Each unit produces between 1,5 and 2 Litres of ultra-pure, 18,2 MΩ.cm, purified water per minute.

Supplier: Purite

These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.

Supplier: Thermo Fisher Scientific

This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: Thermo Fisher Scientific

Safely store purified water from a compatible system with Thermo Scientific™ Water Purification Systems Storage Reservoirs. For use with Thermo Scientific™ Barnstead™ GenPure™, Pacific™ or Smart2Pure™ systems, these reservoirs are compatible with the following models: GenPure, GenPure Pro, GenPure xCAD, GenPure xCAD Plus, Pacific RO, Pacific TII and Smart2Pure.

Supplier: GLASWARENFABRIK KARL HECHT

Complete water distilling apparatus with heater and directions for use.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.