Air Samplers

Supplier: Merck

The MAS-100 Iso NT® is a high-performance instrument based on the impaction principle. The head (using standard 90 mm Petri dishes) can be installed at the critical control points with all electronic and moving parts kept outside the critical zone.

Supplier: Merck

The MAS-100 VF® uses standard Petri dishes for monitoring the quality of your environment. Its electronic speed control maintains an accurate flow rate. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same as on the standard MAS-100® sampler.

Supplier: Merck

The perforated sampling head may be sterilised and can be adjusted to sample horizontally.

Supplier: Merck

The perforated lid is designed for active air monitoring with MAS-100® Sirius instruments at a flow rate of 200 standard Litres per minute (SLPM) in combination with 55 mm contact plates such as ICR/ICRplus contact plates or other small plate formats such as EM cassettes for the Growth Direct system, enabling efficient air sampling in Isolators and cleanrooms.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: Merck

The MAS-100 NT® Ex combines all the advantages of the MAS-100 NT® but, in addition, has been tested for use in areas where there are explosive atmospheres.

Supplier: Merck

The MAS-100® Sirius Microbial Air Sampler is designed for active microbial monitoring of ambient air in controlled environments up to Grade A/ISO 5 cleanrooms.

Supplier: Merck

The MAS-100® Sirius Flex Microbial Air Sampler is designed for active microbial monitoring of ambient air in controlled environments up to Grade A/ISO 5 cleanrooms. This model is supplied without a perforated lid for all probable flow rates and plate formats.

Supplier: Bertin Instruments

Portable dry air sampler for bio contamination control.

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: Merck

Highest collection efficiency and safety in isolators and rabs with up to four sampling points.

Supplier: Merck

The perforated lid is designed for active air monitoring with MAS-100® Sirius instruments at a flow rate of 200 standard Litres per minute (SLPM) using 90 mm agar plates such as ICR/ICRplus settle plates, enabling efficient air sampling in Isolators and cleanrooms.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Sale

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.