You searched for: Homogenisers Bench

Supplier: MP Biomedicals

FastPrep®-24 5G is a high speed bench top homogeniser offering the ultimate in speed and performance for the lysis of biological samples. It uses a unique, optimised motion to disrupt cells through the multi-directional, simultaneous beating of specialised Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep®-24 5G instrument lyses thoroughly and quickly any tissues and cells and allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and a 4 mm black ceramic sphere.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm glass beads and 2 mm yellow zirconium oxide beads.

Supplier: IKA

Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours.

Supplier: MP Biomedicals

Lysing Matrix E is effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,5 mm diameter yttria-stabilised zirconium oxide beads.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1,6 mm silicon carbide particles and 2 mm glass beads.

Supplier: MP Biomedicals

Lysing Matrix B tubes are used primarily for lysis of gram positive and gram negative bacteria, and will also disrupt fungal tissue and spores

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and 1,6 mm aluminum oxide particles.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm diameter zirconium oxide coated ceramic grinding sphere.

Supplier: IKA

Stand model, volume range 250 to 30000 ml. Reproducible operation due to constant speed, even with changes in viscosities.

Supplier: MP Biomedicals

Lysing Matrix D is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres. Lysing Matrix D tubes have green caps and are found in the FastDNA™ Spin Kit for Plant and Animal Tissues and FastRNA™ Pro Green Kit for isolation of nucleic acids from plants and animals.

Supplier: IKA

Stand model, volume range 1 to 1500 ml. The T 18 digital drive unit offers a wide speed range from 3000 to 25000 min⁻¹ that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications.

Supplier: MP Biomedicals

Lysing Matrix B is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 ml tube contains 0,1 mm silica spheres. Lysing Matrix B tubes have blue caps and are found in the FastRNA™ Pro Blue Kit and FastProtein™ Blue Matrix. The fast and easy to use protocol ensures successful lysis with even the most challenging samples for high efficiency and reliability.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimizing of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1,4 mm ceramic spheres, 0,1 mm silica spheres, and one 4 mm glass bead. Lysing Matrix E tubes have purple caps and found in the FastDNA™ SPIN Kit for Soil and the FastRNA™ Pro Soil Kits. Lysing Matrix E can also be effective in lysing mixed samples, such as microbe infected tissue, and can be used in RNA extraction from tumours and other difficult tissues.

Supplier: IKA

The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.

Supplier: IKA

Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours. Ideal for use in medical, pathology, toxicology, pharmaceutical, immunology, veterinary, clinical, food and cosmetics applications. Units are easy and quick to use, enable standardised working, are suitable for individual use or for use in series and feature an anti locking function.

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimising of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries. It is an ideal machine for continuous, circulating and batch processing with interchangeable modules. Many work parameters of the magic LAB® are identical to those of the IKA 2000 inline production machines: UTL, DR, CMS, MHD, MK and MKO. Therefore, the magic LAB® ensures a reliable scale-up by offering the possibility to work with the same method from formulation development to mass production. The basic in-line machine is equipped with the single-stage dispersing module ULTRA-TURRAX® UTL. It is best suited for batch applications and can be adapted for the manufacturing of dispersions from coarse to fine. Compared to a conventional stirrer, the mixing time is reduced by up to 50%. Depending on the application, the basic unit can be modified quickly with different working modules.

Supplier: VELP SCIENTIFIC

Premium digital disperser featuring a powerful brushless motor, electronic speed control, integral timer and counter function, and advanced safety. Engineered for homogenisation, emulsification, suspensions, and high-speed mixing of cosmetic, food, and pharmaceutical products, as well as biological tissues.

Supplier: VELP SCIENTIFIC

Powerful digital disperser designed for the maximum level of reproducibility in a wide range of applications. Cutting-edge technology and engineering expertise guarantee precision and high shearing force for fast homogenisation, emulsification, suspensions, and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

Bead Genie™ is ideal for bead beating, lysing, extraction, or homogenisation applications.

Supplier: witeg Labortechnik

Homogenisers with direct controllers for liquid and tissue samplers.

Supplier: BEHR

Homogenisers for pretreatment, sample splitting and homogenisation of heterogeneous water samples in accordance with German waste water quality control standards.

Supplier: schuett-biotec GmbH

Semi-automatic homogeniser ideal for tough tissue that is difficult to homogenise. For gentle homogenising of sensitive biological samples and tough tissue.

Supplier: BUCHI

Mixer B-400 is designed for efficient homogenisation of a wide range of food and feed samples. The process is based on simultaneous grinding and homogenisation of sample materials by means of volumetric reduction using two rotating blades in a beaker. Automatic electronic monitoring of the speed and the torque allows safe and straight forward operation of the grinding process.

Supplier: BELLCO GLASS

Cellector™ homogenisers, made of stainless steel, are for preparation of cell suspensions and gel extraction of proteins.