You searched for: Petroleum Industry Standards

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Sort By

« ‹ 3 4 5 › »

ASTM® D6584 1,2,4-Butanetriol solution, 1000 μg/ml in pyridine, analytical standard, Honeywell Fluka™

Supplier: Honeywell Chemicals

High quality inorganic and organic reference materials produced according to ISO 9001

Expand 1 Items

ASTM® D6584 Glycerin solution, 500 μg/ml in pyridine, analytical standard, Honeywell Fluka™

Supplier: Honeywell Chemicals

High quality inorganic and organic reference materials produced according to ISO 9001.

Expand 1 Items

ASTM® D6584 standard solution 5, in pyridne, analytical standard, Honeywell Fluka™

Supplier: Honeywell Chemicals

High quality inorganic and organic reference materials produced according to ISO 9001.

Expand 1 Items

Corning Life Sciences

Why Choose Corning Fetal Bovine Serum?

Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.

Buy Now

System Calibration Standard (7 components)

Supplier: CPACHEM

System calibration standard with 7 components.

Expand 1 Items

Petrochemical standard, bio diesel fuel, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Bio diesel fuel, Reference standard

Expand 1 Items

Petroleum standard, regular unleaded gasoline, 2500 µg/ml in methanol, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Regular unleaded gasoline 2500 µg/ml in methanol, Reference standard

Expand 1 Items

Petroleum standard, regular unleaded gasoline 10000 µg/ml in methanol, with certified content of BTEX, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Regular unleaded gasoline, 10000 µg/ml in methanol, with certified content of BTEX, Reference standard

Expand 1 Items

Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether

Supplier: REAGECON

Gasoline calibration standard (two compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS.

Expand 1 Items

Petrochemical standard, regular diesel fuel 2500 µg/ml in methanol, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Regular diesel fuel, 2500 µg/ml in methanol, Reference standard

Expand 1 Items

Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether

Supplier: REAGECON

Gasoline calibration standard (three compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. This product is prepared gravimetrically on a weight/volume basis to a specification of ±2.5%

Expand 1 Items

Calcinated petroleum coke - trace elements

Supplier: LGC Standards PROMOCHEM

This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.

Expand 1 Items

Petroleum standards, heavy mineral oils, CRM

Supplier: LGC Standards PROMOCHEM

This matrix material solution is intended for use as a diluent for other metallo-organic standards.

Expand 2 Items

Fuel oil - trace elements, NIST-1634C reference material

Supplier: LGC Standards PROMOCHEM

NIST-1634C standard, fuel oil- trace elements

Expand 1 Items

Oil analysis standards, phosphorus in 20 blank oil, CONOSTAN®

Supplier: LGC Standards PROMOCHEM

Phosphorus in 20 blank oil, 1000 µg/g

Expand 1 Items

Total Acid Number (TAN) Standards

Supplier: CUSTOM MADE CHEMICALS LAB

Total acid number TAN 17034, 2 mg KOH/g

Expand 4 Items

Cloud Point Standard, ASTM D2500 and ISO 3015 (Diesel) (PPCPD)

Supplier: CUSTOM MADE CHEMICALS LAB

Cloud point standard, Flash point: 62,5 °C, ASTM D2500, ISO3015

Expand 1 Items

Reference standard, water saturated octanol, NIST

Supplier: LGC Standards PROMOCHEM

NIST-2890, water saturated octanol, NIST

Expand 1 Items

Elemental analysis standards, custom blend S-21+K, CONOSTAN

Supplier: LGC Standards PROMOCHEM

Custom blend S-21+K, CONOSTAN®, 885 ppm

Expand 1 Items

Residual fuel oil - sulphur, NIST-1622E reference material

Supplier: LGC Standards PROMOCHEM

This reference standards are intended for use in the calibration of instruments and the evaluation of methods used in the determination of total sulphur in fuel oils and materials of similar matrix.

Expand 1 Items

Biodiesel blank, VHG

Supplier: LGC Standards PROMOCHEM

This solution for using as calibration blank for biodiesel metals and sulphur analysis.

Expand 2 Items

Elemental analysis standards, soot content standards, VHG

Supplier: LGC Standards PROMOCHEM

This reference or calibration standard is intended for use in the determination of soot in diesel motor oil by infrared spectroscopy and other technique.

Expand 6 Items

Gasoline fuel dilution standards, VHG

Supplier: LGC Standards PROMOCHEM

This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.

Expand 1 Items

Reference materials, cloud point reference, VHG

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.

Expand 1 Items

Reference materials, acid number standards, in hydrocarbon oil, VHG

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Expand 1 Items

Reference materials, base number standards, in hydrocarbon oil

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of base number (AN) in petroleum products in accordance with ASTM D2896/IP 276 (by potentiometric perchloric acid titration) or ASTM D4739 (by potentiometric titration).

Expand 13 Items

Reference materials, acid number standards, total acid number (TAN)

Supplier: LGC Standards PROMOCHEM

Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Expand 2 Items

Elemental analysis standards for particle count analysis, VHG

Supplier: LGC Standards PROMOCHEM

PTP sample for particle count analysis, VHG, 125 ml, VHG

Expand 1 Items

Coal fly ash - constituents

Supplier: LGC Standards PROMOCHEM

These reference standard is intended for use in the evaluation of analytical methods used for the classification of coal fly ash and for the determination of constituent elements in coal fly ash or materials of a similar matrix.

Expand 3 Items

Reference standards, biodiesel/diesel fuel Blends

Supplier: LGC Standards PROMOCHEM

These standards are intended for use as calibration and reference standards for the determination of fatty acid methyl esters (FAME) biodiesel content in diesel fuel by infrared (IR) spectroscopy. They are formulated specifically for use with ASTM Method D7371 and EN 14078.