1608 Results for: "Wipes and Swabs"

Supplier: OMEGA BIOTEK

Isolate viral RNA from nasopharyngeal swab specimens (dry or in VTM) using magnetic beads.

Supplier: KIMBERLY CLARK

These towels are designed to reduce waste and provide excellent hand drying with exclusive Absorbency Pockets™ that absorb lots of water fast.

Supplier: VWR Collection

A simple, quick test for hygiene control of work surfaces. Application fields: Food industry, catering, dairy industry, health authorities and HACCP consultants. A colorimetric scale to interpret the results is printed on each tube. The comparison between the solution colour and the colorimetric scale confirms if the surface is clean or dirty. It’s enough to streak the wet swab on a surface, and to insert it into the tube. Break the glass vial contained in the tube by using the clamp. At the end of the test the tube can be disposed of as normal waste. Room temperature storage.

Supplier: OMEGA BIOTEK

The E.Z.N.A.® Forensic DNA Kit is designed to provide a rapid and easy method for the isolation of genomic DNA from forensic samples such as dry blood, buccal swabs, and semen samples for consistent PCR and Southern analysis. This kit can also be used for the preparation of genomic DNA from mouse tail snips, whole blood, buffy coat, serum, and plasma.

Supplier: ITW-CONTAMINATION TEXWIPE

Vertex® wipes are the cleanest, most consistent, and most rigorously quality tested cleanroom wipes.

Supplier: ITW-CONTAMINATION TEXWIPE

This 100% polyester double knit microdenier wipe made on Texwipe's Vertex process is ideal for wiping surfaces that are most susceptible to scratching.

Supplier: ITW-CONTAMINATION TEXWIPE

PolySat® is constructed from a 100% melt-blown polypropylene substrate that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable FlexPack. PolySat® is convenient for cleaning sensitive surfaces and polishing equipment in controlled environments.

Supplier: ITW-CONTAMINATION TEXWIPE

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: ITW-CONTAMINATION TEXWIPE

These mop covers are constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern.

Supplier: KIMBERLY CLARK

These critical task wipes feature a 50% rayon/50% polyester spunlace blend base sheet with high water absorbency rate, plus excellent absorption efficiency and capacity.

Supplier: ITW-CONTAMINATION TEXWIPE

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: ITW-CONTAMINATION TEXWIPE

SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: KIMBERLY CLARK

Premium quality 2-ply tissues.

Supplier: ITW-CONTAMINATION TEXWIPE

This soft 100% melt-blown PP wipe is pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionised water solution.

Supplier: ITW-CONTAMINATION TEXWIPE

This wipe made of 55% non woven cellulose and 45% polyester fibre is pre-saturated with 6% IPA.

Supplier: ITW-CONTAMINATION TEXWIPE

Sterile TexTra™ is a single-ply, double-knit, 100% continuousfilament polyester wipe that offers high-capacity sorption in a heavyweight, large surface area wipe. It is an economical alternative to two-ply polyester wipes and ideal for spill control as well as for cleaning pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, and microbiological laboratories.

Supplier: ITW-CONTAMINATION TEXWIPE

ThermaSeal™ wipes are hot cut polyester wipes for all-purpose cleaning in critical environments. Ideal for cleaning medical devices, displays and products in the semiconductor and microelectronics area.

Supplier: FHP VILEDA SCS

This plastic dispenser is suitable for Quick’n Dry Roll, r-MicronSolo Roll, r-MicroZero Roll and MicroRoll wipe rolls.

Supplier: ITW-CONTAMINATION TEXWIPE

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: VWR Collection

This strong, non woven cloth constructed of cellulose and polyester will not scratch surfaces or fall apart. It is pre-moistened with a unique formulation which easily removes oil, grease and lint.

Supplier: ITW-CONTAMINATION TEXWIPE

These wipes are primarily intended for the usage as flat mop covers for cleaning and decontaminating floors. Made of non-woven polyester, they are especially suitable for cleaning and removing residues.

Supplier: ITW-CONTAMINATION TEXWIPE

MiracleWipe® is made from 100% continuous-filament nylon. The double-knit construction, texture and body of the nylon filament give the wipes excellent softness and superior strength.

Supplier: KIMBERLY CLARK

These PP wipes are engineered for critical applications involving solvents, inks, and paints. Typical applications include: furniture finishing, engine assembly/repair, pre-packaging wipe down, LCD panel assembly, appliance assembly, printing, and glass or window cleaning.

Supplier: KIMBERLY CLARK

Dependable, folded towels provide softness, absorbency, and performance.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% melt-blown PP wipes are pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionized water solution.

Supplier: ITW-CONTAMINATION TEXWIPE

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: ITW-CONTAMINATION TEXWIPE

These highly sorbent wipes are made from 100% continuous filament polyester in a double-knit, 'no run' interlock pattern. The wipes are pre-wetted with 70% IPA and 30% deionised water.

Supplier: ITW-CONTAMINATION TEXWIPE

These premium heavy-weight all-purpose wipes are made from 100% continuous filament polyester in a double-knit, no run, interlocked pattern. Soft and non abrasive, they are ideal for critical environments where contamination control is essential.

Supplier: ITW-CONTAMINATION TEXWIPE

Texwipe® is a strong, double-sided twill-pattern cotton wipe woven in a cross section of 118×60 threads per square inch. The product is manufactured with long stable cotton yarn to eliminate free-floating fibres on fabric surfaces. Ideal for cleaning diffusion furnace equipment in water fabrication and other equipment in areas where high temperatures prevent the use of synthetic wipes.