5574 Results for: "Temperature+Control+Systems&amp"

Supplier: VWR Collection

For use with VWR® circulators with a programmable or digital controller when direct digital control is not required. Connects to the RS232 port and provides 10 mV/degree analogue signal for external monitoring or control.

Supplier: DGP INTELSIUS

Utilises pharmachill cool packs are hard wearing and durable re-usable coolant, reducing costs and landfill waste.

Supplier: ION EXCHANGE INDIA

LAB-Q Ultra - Type I is a multipurpose water maker. This water maker produces Type I ultrapure water and Type II pure water simultaneously. The produced water has very low total organic carbon (TOC) content, meeting the requirements of liquid chromatography and all spectroscopy methods, besides microbiological and molecular biology application. It also meets ISO 3696, Type I Standards. Dispensing of ultrapure water is configured on the front panel whereas pre water is dispensed from the storage tank. For feed water with higher level of TDS i.e. >500 ppm a customised pre treatment module can be designed prior to INDION Lab-Q Ultra.

Supplier: Avantor Fluid Handling

Four sensors operate as through-glass buttons for easy on-site programming without removing the cover and exposing the electronics.

Supplier: IKA JANKE KUNKEL

Compact incubator shakers designed for safe, unattended operation in a temperature controlled environment. The units have a large LED display for speed, temperature and timer. An integrated PID temperature control allows the use of PT1000 temperature sensors to ensure highly accurate temperature control. The electronically controlled incubators come equipped with RS232 and USB ports for PC interface. All functions can be controlled and documented using optional labworldsoft® software. In addition the  KS 3000 ic control has a built in cooling coil for connection to an external cooling unit.

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: VWR Collection

Stainless steel bath with user friendly MX temperature controller, has three control buttons and on-screen prompts. Specifically designed for production of microbiological culture media. The controller bridge, made from chemical resistant DuraTop™, is easily removed to allow cleaning of the tank. The bath has an opening with lid for optional cooling coil, which is ideal for set points near ambient temperature.

Supplier: VWR Collection

VWR® recirculating chillers are ideal for use with rotary evaporators, as they ensure constant, reproducible cooling conditions and avoid wasting tap water thereby increasing cost savings. Designed to be user friendly, the units have an easily accessible filling port on top of the unit and a drain tap at the back. The chillers have a stainless steel reservoir, operate using R134 refrigerant and can be used in the permitted ambient temperature range of 15 to 32 °C.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: Avantor Fluid Handling

Conveniently collect all filtered particles within the bag.

Supplier: JULABO GMBH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: HAMILTON BONADUZ

Reproducibility adapter for series 702 through 1750 Microliter™, series 7000 Modified Microliter™ and series 1702 through 1750 Gastight® syringes

Supplier: Avantor Fluid Handling

Unique bar-knob closure is safer and faster than clamp designs.

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: VWR Collection

Accessory for UV/Visible spectrophotometers, Controller sipper system A1100, VWR®, For: V-1200, UV-1600PC, UV-3100PC

Supplier: Avantor Fluid Handling

All models include a calibration certificate to NIST-traceable standards. Flow rates are unaffected by modest temperature and pressure variations—providing excellent response and accuracy Nonclogging straight-tube sensor ensures laminar gas flow for more accurate measurements.

Supplier: VWR Collection

These circulating chillers are an environmentally friendly, water-conserving and reliable means of controlling the temperature of liquids in open tanks or closed loop systems. They provide high cooling performance at low cost. With a temperature range from −10 to +40 °C, they are ideally suited for many process and routine applications.

Supplier: IKA JANKE KUNKEL

Easy to use incubator shaker that allows unattended operation in a temperature-controlled environment. Unit features a large LED display for speed and time settings and integrated PID temperature control (using two PT1000 temperature sensors). Shakers have electronic temperature and speed control. There is a collecting tray with drain hose at the rear of the shaker and controls have antimicrobial coating to reduce bacteria.

Supplier: Avantor Fluid Handling

Program your process meter on-site.

Supplier: KGW

Level control for liquid nitrogen type is manual or automatic refill. It is used for level control of liquid nitrogen (LN₂) in unsealed Dewar flasks.

Supplier: Avantor Fluid Handling

Strength and durability without bulk.

Supplier: Heidolph Instruments GmbH & Co.KG

Vacuum valve, For: Heidolph Laborota 20 control

Supplier: FHP VILEDA SCS

These cleanroom cleaning trolleys are specially designed for use in sensitive areas and controlled environments. The cleaning trolleys are extremely functional, versatile and are characterised by superior ergonomic properties.

Supplier: Avantor Fluid Handling

Conveniently collect all filtered particles within the bag.

Supplier: HAMILTON BONADUZ

This multi-syringe dispenser consists of six identical 1700 RN series Gastight® syringes. An easy to use mechanism releases step by step movement of the plungers. Each movement dispenses 1/50th of the syringe volume.

Supplier: PanReac AppliChem

Lyophilised PCR mix for the detection of mycoplasma in cell culture by Real-Time/qPCR.

Supplier: Heidolph Instruments GmbH & Co.KG

Large scale evaporators up to 20 L.

Supplier: LABCONCO

Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: Avantor Fluid Handling

New Masterflex® Flow Controller automatically adjusts pump speed as tubing ages.