2911 Results for: "Lanthanum chloride solution&"
Hydroxylammonium chloride 10% in aqueous solution
Supplier: HACH
Hydroxylammonium chloride 10% in aqueous solution
Expand 1 Items
Reference electrode filling solutions
Supplier: METTLER TOLEDO
FRISCOLYT-B® (84,4% glycerol, 11% KCl and 4,6% H₂O) is for low temperature samples.
Expand 1 Items
Sodium chloride solution 5M DNase-, RNase-, protease-free, Corning®
Supplier: Corning
The 5 M NaCl is a common molecular biology reagent.
Expand 1 Items
Magnesium chloride 510 g/l in aqueous solution
Supplier: HACH
Magnesium chloride 510 g/l in aqueous solution
Expand 1 Items
AMP (2-Amino-2-methylpropanol), high purity
Supplier: VWR Chemicals
5% water has been added to maintain liquidity at room temperature.
Expand 1 Items
Chloride standard solution
Supplier: HACH
For accuracy checks in chloride determinations. Also suitable for standardising conductivity apparatus.
Expand 1 Items
VWR®, Conductivity standards, NaCl
Supplier: VWR Collection
NaCl standard solutions can be used to calibrate instruments that measure any samples containing NaCl (sodium chloride) as major component, such as seawater, brackish water, etc.
Expand 3 Items
Hydrochloric acid 1 mol/l (1 N)
Supplier: HACH
Hydrochloric acid 1 mol/l (1 N)
Expand 1 Items
2,3,5-Triphenyltetrazolium chloride (TTC) 1% in aqueous solution
Supplier: HACH
2,3,5-Triphenyltetrazolium chloride (TTC) 1% in aqueous solution
Expand 1 Items
Hydrochloric acid 6 mol/l (6 N)
Supplier: HACH
Hydrochloric acid 6 mol/l (6 N)
Expand 1 Items
Buffer solution for water testing
Supplier: HACH
Buffered dilution water required for testing recreational, drinking and wastewater.
Expand 1 Items
Conductivity standards
Supplier: METTLER TOLEDO
A slight change in temperature usually has a big impact on the conductivity value of a standard solution. A table on every bottle label indicates the conductivity values at the most common measurement temperatures.
During calibration the meter automatically references to this table for temperature compensation. If possible, calibration and measurements should be performed at the same temperature
Expand 1 Items
Hydrochloric acid 0.02 mol/l (0.02 N)
Supplier: HACH
Hydrochloric acid 0.02 mol/l (0.02 N)
Expand 1 Items
VWR®, Conductivity standards, KCl, referenced at 25 °C
Supplier: VWR Collection
Concentration: 0,00068 mol/L KCl, VWR®, 100 µS/cm
Expand 4 Items
Test kits, drop count tests/
Supplier: HACH
The drop count test is a simple, easy and cost-effective way to test for many parameters like chlorine, chloride, dissolved oxygen, carbon dioxide, sulphite, nitrogen, formaldehyde, and more.
Expand 25 Items
Phosphate-buffered saline (PBS), Corning®
Supplier: Corning
Phosphate buffered saline (PBS) is a buffer solution containing sodium chloride, sodium phosphate, and in some formulations potassium chloride and potassium phosphate
Expand 3 Items
ISE standards
Supplier: HACH
ISE standards are used to calibrate ion selective electrode measurement systems by coresponding the electrode output with the concentration of the analyte. Pairs of standards with concentrations that differ by a factor of ten are used for analysis.
Expand 9 Items
Hydrochloric acid solution N/10, Rankem®
Supplier: RANKEM
Hydrochloric acid solution N/10, Rankem®
Expand 1 Items
VWR® Traceable® One-Shot™, Conductivity standards (CRM)
Supplier: VWR Collection
Traceable® Conductivity Standards are among the most accurate available. They are compatible with all makes of equipment, and can be used in lab or field. Each bottle is labeled for calibrating conductivity (microsiemens/micromhos), resistivity (ohms), and dissolved solids (parts per million).
Expand 5 Items
Hydrochloric acid min 35,00%, Laboratory Reagent, Rankem®
Supplier: RANKEM
General lab reagent for routine laboratory use
Expand 4 Items
Test kits, general boiler water, drop count titration, AL-94
Supplier: HACH
This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the small boiler operator who needs to monitor alkalinity (5 to 400 mg/L), chloride (5 to 400 mg/L), hardness (0 to 2500 mg/L), iron (0 to 4 mg/L), and pH (4 to 10).
Expand 1 Items
Cleanroom tapes, TPA series
Supplier: ITW-CONTAMINATION TEXWIPE
The TPA series is constructed from a low density polyethylene (LDPE) backing with an acrylic adhesive. This is low in halogens, leachable chlorides and heavy metals, providing users with the ideal cleanroom tape solution. TPA cleanroom tape is ideal for colour coding and product identification, and its high conformability makes it well suited for sealing and packaging materials in critical environments.
Expand 3 Items
Hydrochloric acid min 35,40%, Analytical reagent (AR), Rankem®
Supplier: RANKEM
High purity analytical reagent.
Expand 3 Items
Single-Phase Input Variable-Speed Controllers
Supplier: Avantor Fluid Handling
Operate a 230-240 VAC motor with only a 115 VAC power supply.
Expand 3 Items
Hydrochloric acid 6 mol/l (6 N)
Supplier: BDH US PRODUCED
Hydrochloric acid 6 mol/l (6 N)
Expand 1 Items
Hydrochloric acid 1 mol/l (1 N)
Supplier: BDH US PRODUCED
Hydrochloric acid 1 mol/l (1 N)
Expand 2 Items
Accessories for glove boxes, Precise™
Supplier: LABCONCO
Electrical power strip, UK-plug, 250 volts, 2 amps, 6 receptacles
Expand 3 Items
Tin(II) chloride dihydrate ≥95%, TECHNICAL
Supplier: VWR Chemicals
Tin(II) chloride dihydrate ≥95%, TECHNICAL
Expand 1 Items
Silver chloride ≥99%, TECHNICAL
Supplier: VWR Chemicals
Silver chloride ≥99%, TECHNICAL