320 Results for: "JULABO GMBH"

Supplier: JULABO GMBH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GMBH

High temperature circulators can be used for temperature applications up to 400 °C; units provide powerful heating capacities for shortest heat-up times and rapid compensation of endothermic reactions. Applications include use with reactors, autoclaves, distillation columns, mini plant installations, pilot plants and production facilities. Because of the closed circuit system oxidation is reduced and unpleasant odours and vapours do not escape, even at high temperatures.

Supplier: JULABO GMBH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GMBH

Y-adapter cable for connecting 1 dual PT100 sensor to 2 Lemosa sockets for LC temperature laboratory controller

Supplier: JULABO GMBH

Fulfil temperature-dependent measurement, control, safety and monitoring tasks for heating mantles, heating baths and heating mats.

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: JULABO GMBH

2× adapters, M16×1 female to NPT ¼" male

Supplier: JULABO GMBH

Metal tubing is integrated insulated and flexible with connectors and fittings. This flexible metal tubing can be bolted together with the circulator and the external system, provides anti-slipping. Triple insulated tubing is used for wide temperature ranges.

Supplier: JULABO GMBH

FT immersion coolers are primarily used for counter cooling when connected to a heating circulator, or for rapidly cooling fluids down to low temperatures. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GMBH

Sensor is suitable for use with calibration baths.

Supplier: JULABO GMBH

A range of software that allows programming, viewing and recording of temperature and time dependent processes in combination with laboratory instruments. Comprehensive communication and networking possibilities via RS232/RS485, USB (with optional converter) and Profibus assist with laboratory automation.

Supplier: JULABO GMBH

Unstirred water bath

Supplier: JULABO GMBH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: JULABO GMBH

Stainless steel shaking water baths are suitable for unsupervised continuous operation. The bright, LED Multi-Display showing up to six temperature values is visible from across the lab. Advanced microprocessor technology with PID temperature control eliminates temperature overshoot and provides high temperature stability. Sensitive samples are well protected; as soon as the high and low temperature limits are reached an intermittent tone sounds. If the liquid in the bath reaches a minimum, the unit shuts down completely and a continuous single tone sounds.

Supplier: JULABO GMBH

PRESTO® systems cover a working temperature range of −93 to +250 °C with high cooling and heating capacity. These instruments can compensate for exothermic and endothermic reactions with extraordinary speed, they feature high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature control of liquid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to long service life. The integrated touch panel gives the user a clear view of important information. Fingertip control via the touch screen. Multiple interfaces enable remote control of the PRESTO® across networks and in super-ordinated control systems. Wireless remote control of the new PRESTO® can easily be done by using the Wireless TEMP range of products.

Supplier: JULABO GMBH

The powerful and robust CORIO™ laboratory circulators provide the exact temperature, absolute precision and a wide working temperature range. The CORIO™ C immersion circulator is the basic model, it is ideal for standard internal applications, the CORIO™ CD model is more advanced and can be used for temperature control of external applications if required. The jet nozzle allows continuous adjustment of the pump stream in the bath. The transparent polycarbonate baths are durable and enable the user to easily view items in the bath.

Supplier: JULABO GMBH

DI-filter cartridge, For: DI-filter housing, plastic/stainless steel type of SemiChill recirculating coolers

Supplier: JULABO GMBH

Shaking bath, Universal tray for 25 - 1000 ml Erlenmeyer flasks (400×230 mm)

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: JULABO GMBH

2× adapters, M24×1,5 female to tube ½", For: All New Presto® series units

Supplier: JULABO GMBH

Tubing for circulator, Viton®, Tubing int.Ø: 12 mm

Supplier: JULABO GMBH

Calibration baths have been designed for applications in calibration laboratories such as ISO, DKD, NAMAS, UKAS and conform to the requirements according to DIN EN ISO 9001:2000. Units have a chamber at a constant temperature level and can be used for precise calibration of temperature sensors, measuring instruments, thermometers according to national and international standards. Refrigerated models are suitable for use at temperatures from −30 to +200 °C as well as use as calibration baths for temperatures from 50 to 300 °C. With the optional precision reference sensor it is possible to measure the reference temperature. Baths feature a PID cascade temperature control for highest internal and external temperature stability and an integrated programmer with 10 program steps.

Supplier: JULABO GMBH

2× adapters, G 1 ¼" female to barbed fitting for tubing ½" inner diameter

Supplier: JULABO GMBH

Hollow PP balls, 20 mm Ø, For: Open heating baths, heating circulators, water baths and shaking water baths

Supplier: JULABO GMBH

Rack, Test tube, Test tube racks, up to 100 °C, for TW8, TW12, TW20, SW22, SW23, For tube Ø: 16/17 mm, No. of Holes: 50

Supplier: JULABO GMBH

FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GMBH

ISO 5 point calibration certificate, For: Calibration baths

Supplier: JULABO GMBH

Working temperature −40 to +120 °C.

Supplier: JULABO GMBH

Stainless steel test tube rack for 10×50 ml falcon tubes , For: B5, BT5

Supplier: JULABO GMBH

Stainless steel bath tanks in different sizes. For use with all CORIO C and CD circulators.