170 Results for: "ITW-CONTAMINATION TEXWIPE"

Supplier: ITW-CONTAMINATION TEXWIPE

Swab with open-cell PU foam head. This surrounds a cotton bud core, which provides cushioned support and additional sorbency.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% melt-blown PP wipes are pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionized water solution.

Supplier: ITW-CONTAMINATION TEXWIPE

These sets contain components for sampling different locations in the production area, and provide an efficient means of transporting the samples from production to laboratory with minimal chance of contamination.

Supplier: ITW-CONTAMINATION TEXWIPE

Texwipe® is a strong, double-sided twill-pattern cotton wipe woven in a cross section of 118×60 threads per square inch. The product is manufactured with long stable cotton yarn to eliminate free-floating fibres on fabric surfaces. Ideal for cleaning diffusion furnace equipment in water fabrication and other equipment in areas where high temperatures prevent the use of synthetic wipes.

Supplier: ITW-CONTAMINATION TEXWIPE

BetaMop™ II features a tubular-knit polyester mop head for economical floor cleaning. Quick change clamp assembly.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% cotton swabs can be used for hard-to-reach areas.

Supplier: ITW-CONTAMINATION TEXWIPE

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: ITW-CONTAMINATION TEXWIPE

Swab series made from the cleanest microdenier material, 100% polyester, nylon-free. The complete thermal bond construction eliminates adhesive contamination.

Supplier: ITW-CONTAMINATION TEXWIPE

PU foam head has been solvent-washed to greatly reduce non volatile residue.

Supplier: ITW-CONTAMINATION TEXWIPE

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: ITW-CONTAMINATION TEXWIPE

Swab head features ultra-clean, laundered, double layer knitted Alpha polyester with flexible internal paddle.

Supplier: ITW-CONTAMINATION TEXWIPE

Constructed from open-cell polyurethane foam, the laundered CleanFoam® head excellent cushioning and superior sorbency on a flexible internal handle for cleaning very small areas.

Supplier: ITW-CONTAMINATION TEXWIPE

Ideal for leaving notes on documents, reports, instruments, and most cleanroom surfaces.

Supplier: ITW-CONTAMINATION TEXWIPE

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: ITW-CONTAMINATION TEXWIPE

This 100% polyester double knit microdenier wipe made on Texwipe's Vertex process is ideal for wiping surfaces that are most susceptible to scratching.

Supplier: ITW-CONTAMINATION TEXWIPE

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: ITW-CONTAMINATION TEXWIPE

The hydroentangled non woven PE tip is extremely low in non volatile residue.

Supplier: ITW-CONTAMINATION TEXWIPE

Adhesive coated contamination control mats capture particulates from foot traffic and equipment wheels, providing the most effective dirt and dust removal method available in a mat.

Supplier: ITW-CONTAMINATION TEXWIPE

Swab with a thermally-moulded CleanFoam head on a flexible paddle. Made from PU foam with 100 pore per inch porosity.

Supplier: ITW-CONTAMINATION TEXWIPE

Durable general-purpose swabs for use with a solvent such as isopropanol.

Supplier: ITW-CONTAMINATION TEXWIPE

ClipperMop™ cleanroom mops are designed to use standard 230×230 mm (9×9'') and 310×310 mm (12×12'') cleanroom wipes, eliminating the need to qualify and inventory additional wipes or mop covers. The mophead uses non abrasive polyethylene clips to securely fasten one or more wipes to the head. The ClipperMop™ wipe attachment method does not release particles, fibres or dirt. The mop system can be sterilised by gamma irradiation, chemicals, vapourised hydrogen peroxide (VHP) or ethylene oxide (EtO). The powder-coated steel, telescopic handle extends from 73 to 134 cm.

Supplier: ITW-CONTAMINATION TEXWIPE

Sterile TexTra™ is a single ply, 100% continuous filament polyester wipe that offers high capacity sorption in a heavyweight, large surface floor wipe. It provides good abrasion resistance and is an ideal choice for all floor cleaning applications.

Supplier: ITW-CONTAMINATION TEXWIPE

TexBond® is a cleanroom bond paper with exceptional contamination control characteristics needed in critical environments. It has been especially formulated to address the needs of users requiring a paper that retains low ion and particle levels with significantly improved copying and writing qualities. This paper will yield sharp copies that will not show through to the next sheet due to its high opacity rating.

Supplier: ITW-CONTAMINATION TEXWIPE

Soft, non abrasive swab is suitable for cleaning delicate optical components including coated lenses, fibre-optic sensors and mirrors.

Supplier: ITW-CONTAMINATION TEXWIPE

These swabs feature 100% continuous filament polyester that is heat-moulded (thermally-bonded) onto the handle, sealing exposed edges to reduced fibre release and eliminating the need for contaminating adhesives.

Supplier: ITW-CONTAMINATION TEXWIPE

These hot-cut polyester wipes are suitable for all-purpose cleaning in critical cleanroom environments.

Supplier: ITW-CONTAMINATION TEXWIPE

AlphaSat® with Vectra® AlphaSorb®10 incorporates ITW Texwipe's ultraclean AlphaSorb 10 sealed-border wipes (100% polyester) with 10% semiconductor-grade isopropyl alcohol (0,2 µm filtered) in an easy-to-use flatpack package.

Supplier: ITW-CONTAMINATION TEXWIPE

Isolator cleaning tool: Mop hardware, replacement head, replacement handle.
Specially engineered to work with isolators and other small areas, this easy to manoeuvre tool offers lightweight, one handed operation. With a low profile, swivel head, the isolator cleaning tool gets into 'hard to reach' places.
Engineered for quick cover changes during operation, the padded head allows for a consistent mop across different surfaces without losing cleaning power. The rounded edges clean the isolator corners and prevent scratches or damage to surfaces.

Supplier: ITW-CONTAMINATION TEXWIPE

Swab features 100% continuous filament polyester substrate that is heat-moulded (thermally-bonded) onto the handle, sealing exposed edges for reduced fibre release and eliminating the need for contaminating adhesives. The double layered, cleanroom-laundered, knitted Alpha polyester head is extremely clean.

Supplier: ITW-CONTAMINATION TEXWIPE

This swab series is made from 100% polyester (hydroentangled) non woven material. The complete thermal bond construction eliminates adhesive contamination during the cleaning validation.