132 Results for: "Air Filters"

Supplier: Liebherr

Cabinets designed for the storage and ageing of wines a protected environment.

Supplier: MILLIPORE

These centrifugal filters are disposable ultrafiltration non sterile devices used for purifying, concentrating, and desalting biological samples in the 2 to 15 ml volume range.

Supplier: RANKEM

These nylon membranes are used for filtration of alkaline solutions and organic solvents. Designed for particle removing filtration of water, aqueous solutions and solvents for analytical determination and filtration of mobile phase solvents for HPLC analysis.

Supplier: KARTELL

HDPE, translucent.

Supplier: GRANT INSTRUMENTS

Advanced benchtop UV cabinets providing aseptic conditions for a variety of biomedical and biochemical procedures. Innovative dual UV system: built-in UV-air recirculator provides constant decontamination of the air volume within the cabinet while working and traditional surface UV decontamination while the door is closed.

Supplier: MILLIPORE

The MilliSolve™ filtration system has been designed for the filtration of liquid chromatography buffers and solvents under vacuum. The system uses a 0,45 µm membrane filter to eliminate particles which can shorten column life.

Supplier: MILLIPORE

ZHE (Zero Head Space Extractor) hazardous waste filtration system, which is approved by the US Environmental Protection Agency (EPA) as an apparatus for Toxicity Characteristic Leaching Procedure (TCLP) measurement. The system cannot pressurise unless completely assembled; this eliminates accidentally 'shooting the piston' out of the unit and assures safe operation. Choose both manual and automatic venting modes.

Supplier: MILLIPORE

Woven mesh spacer, dacron, 124 mm are placed between filters in serial filtration to prevent the downstream screen filter from 'blinding' the upstream filter pores. They increase flow rate and throughput.

Supplier: KARTELL

PP, translucent.

Supplier: Bohlender

Screw cap made of PPS for GL 45 thread / PP for GLS 80 thread, free movable insert made of PP with 4 lateral connectors (GL 45) suitable for b.safe Caps GL 45 and 3 centric capillary connectors (UNF ¹/₄"). Version and scope of delivery as per below chart.

Supplier: LABCONCO

This filtered glove box with fibreglass liner provides inlet and outlet HEPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. The glove box may also be appropriate for use as a containment isolator for applications that include compounds assigned ISO 4 and ISO 5 Banding Levels.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: MILLIPORE

These PC hydrophilic membrane are track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. They are composed of polycarbonate film, which has a smooth, glass like surface for clearer sample observation.

Supplier: VWR Collection

These solvent waste system is designed to be an affordable solution for HPLC liquid waste disposal.

Supplier: VITLAB

PMP, crystal clear.

Supplier: MILLIPORE

The Stericap™ PLUS Universal bottle-top filter device with Millipore Express® PLUS membrane provides fast vacuum filtration and low protein binding without the need for a prefilter in most cases. It filters quickly, without clogging, even viscous solutions typical of serum-containing media. This non-cytotoxic, non-pyrogenic device can be used to fill any vacuum-rated bottle or other container with an inner neck diameter of 20 to 67 mm. This allows maximum versatility, capacity, speed, and flowthrough efficiency when you need to filter larger volumes into containers with openings of various sizes.

Supplier: VWR Collection

These stoppers are made of cellulose and are used for microbiological samples and tissue cultures in test tubes or Erlenmeyer flasks.

Supplier: VWR Collection

VWR® Class II, Type A2 Biological Safety Cabinets protect lab staff, the environment, and sensitive work processes in which biological agents are applied. The cabinets offer a high level of contamination protection, based on two advanced ULPA U15 99.9995% @ 0.1 µm filters and features an airflow pattern of 70% downflow and 30% exhaust.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: GARDNER DENVER

Use Labovac pump oils with Welch pumps to reduce oil change cycles and maximise performance. This warranty is only effective when using Welch qualified vacuum pump oils.

Supplier: HAIER MEDICAL LABORATORY PRO

The Haier biomedical biological safety cabinets are designed to protect the operator, laboratory environment and samples from being exposed to the infective aerosol produced from samples with bacteria strains, diagnostic materials and other infective substances. The units provide the operator with comfortable and safe working conditions. They are widely used in medical health, disease prevention, food safety, biological pharmacy and environment monitoring.

Supplier: LABCONCO

XPert weigh boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: VWR Collection

VAPOUR-Line autoclaves are designed for applications such as liquids in open or slightly closed vessels, instruments and solids, unwrapped and waste sterilisation (not DIN 58951 compliant).

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: BURKLE

Foot operated solvent pumps for filling of high purity liquids such as solvents. All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE.

Supplier: VWR Collection

These benchtop chillers are environmentally friendly and economical alternatives to tap-water cooling.

Supplier: UVEX

Goggles with panoramic lens shape allow 180° uninterrupted lateral vision. They are anatomically shaped and fit comfortably over most prescription spectacles.

Supplier: KIMBERLY CLARK

These hoods are made of breathable SMS fabric that adds a cloth-like feel. They are available as a standard design or with an integrated face mask.

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: Avantor Fluid Handling

A high-quality engineered solution for every application in the fill-finish workflow.