2912 Results for: "Advanced Inlet Septa"

Supplier: Avantor

PEEK HPLC column inlet / outlet connectors. These column connectors are designed for use at both the column inlet and outlet ends. They are suitable for use with ¹/₁₆" ext.Ø tubing and all manufacturers' HPLC systems and all brands of HPLC columns.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

VWR®, Septa, Red butyl/grey PTFE, Hardness: 55° shore A, Thickness: 2,4 mm

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: VWR Collection

VWR®, Septa, Red butyl/grey PTFE, Hardness: 55° shore A, Thickness: 2,4 mm, Ø: 43,2 mm

Supplier: VWR Collection

VWR®, Septa, Transparent blue silicone /white PTFE, Hardness: 45° shore A, Thickness: 1,3 mm

Supplier: VWR Collection

VWR®, Chromatography vial closure, PP, Screw caps without septa, open top, 8-425 thread, Hardness: －, Septum: －, Thickness: －

Supplier: VWR Collection

VWR®, Chromatography vial closure, PP, Screw caps without septa, closed top, Hardness: －, Septum: －, Thickness: －

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: Avantor

This reusable UHPLC column connector have 10-32 threads. This fitting is reusable, as they are not permanently swaged onto the inlet tubing.

Supplier: VWR Collection

VWR®, Septa, Cream silicone/beige PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 30 mm

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: Avantor

Stainless steel/PEEK UHPLC column inlet / outlet connectors. These column connectors are designed to connect UHPLC columns to UHPLC systems and make other similar connections. They are suitable for use with ¹/₁₆" ext.Ø tubing and virtually all manufacturers' UHPLC systems and all brands of UHPLC columns.

Supplier: VWR Collection

VWR®, Chromatography vial closure, Steel, Screw caps with septa, open top, magnetic, Hardness: 70° shore A, Septum: Viton 1A black, Thickness: 1,0 mm

Supplier: VWR Collection

VWR®, Chromatography vial closure, PP, Ø: 18 mm, Type: PP black, closed, without septum, Hardness: -, Septum: -, Thickness: - mm

Supplier: Avantor Fluid Handling

Operate fully submerged or in open air.

Supplier: VWR Collection

Chromatography vial closure, Screw caps with septa, open top, Hardness: 50° shore A, Septum: Beige silicone/red PTFE, Thickness: 1,5 mm

Supplier: VWR Collection

Crimp Neck ND13 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of aluminium seal styles and septa materials.

Supplier: Avantor Fluid Handling

Protect products and expensive process equipment from coarse or fine particulates.

Supplier: VWR Collection

Chromatography vial closure, Screw caps with septa, open top, Hardness: 50° shore A, Septum: Red butyl/grey PTFE, Thickness: 1,6 mm

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: VWR Collection

VWR®, Septa, Beige silicone/natural PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 23 mm

Supplier: Avantor Fluid Handling

Dispense liquids safely and quickly from most storage containers.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: Avantor Fluid Handling

Come in a variety of configurations—choose the number of ports and connections to suit your needs!