Supplier: BURKLE

Novartos Uno sampler with two or three sample chambers, for one sample zone.

Supplier: SAMPLING SYSTEMS

These triers are suitable for taking a large volume, cross sectional sample from a container.

Supplier: SAMPLING SYSTEMS

The TeleSwab has an extendable handle, which allows to take swabs from high and difficult to reach places.

Supplier: BURKLE

When bulk goods are transported, they may separate out and surface samples may not be representative. The sampler is opened manually once it has reached the required depth.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: BURKLE

Novartos is the pharmaceutical zone sampler for sampling in accordance with the FDA guidelines for unit dose sampling. With the Novartos pharmaceutical samplers, multiple individual dose samples (unit dose samples) can be taken from one or more sampling points in a single sampling.

Supplier: BURKLE

The scratcher is designed for powders and granules that do not flow freely.

Supplier: BURKLE

Quality assurance starts with the inspection of incoming goods. An all-layer sample of bulk goods is no longer a problem with PowderProof®, the sampler for powders and granules.

Supplier: BURKLE

Pigment lance to sample pigments, pastes and agglomerating bulk goods.

Supplier: BURKLE

This sampler with drilling blades makes it easy to take samples of media, even those with high density, and every type of highly compacted powders and granulates.

Supplier: BURKLE

GeoSampler is specially designed for soil sampling.

Supplier: BURKLE

Stainless steel construction. Developed for sampling milk powder. The collector is inserted into bags or casks and the sample is removed using a half-shell shaped lance. Insertion depth 385 mm, total length 480 mm, ext.Ø approximately 28 mm.

Supplier: BURKLE

Samplers for viscous, paste-like and semi-liquid substances.

Supplier: BURKLE

The scratcher has particularly been designed for sampling cohesive or caked substances.

Supplier: BURKLE

Very robust sampler for heavy and stony soils. The model with 1000 mm flute length has a conically-tapered 60 cm tip which makes it much easier to extract the driven-in sampler.

Supplier: BURKLE

Sampler for free flowing bulk goods up to approx. 10 mm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.

Supplier: BURKLE

With EasySampler, it is possible to take multiple samples from bulk goods, quickly and easily.

Supplier: BURKLE

Conical hand drill with sharp cutting edges and a solid handle made from stainless steel V2A (1.4301)/AISI 304.

Supplier: BURKLE

Sampler developed for sampling from frozen, highly viscous, paste-like materials such as ice-cream and similar substances. The drill-shaped cutter screws itself into the frozen goods independently when being rotated. The collection cylinder can easily be detached via a bayonet connection. The sample is then available and can be removed.

Supplier: BURKLE

Stainless steel sampler for powders. The conical inlet allows for collection of different sample sizes, up to approximately 50 ml. Constructed without edges, grooves or crevices for easy cleaning. The sample is collected directly into the sampling bag which is held in place with the included clamp. StickProof borehole diameter 25 mm; chamber length 120 mm. Sampling bags: 170×120 mm for 400 ml.

Supplier: BURKLE

For taking bacteriological samples from the surfaces of dead animals in slaughterhouses and in butchers‘ shops. (cattle, pigs, sheep, goats and horses). The BeefSteaker is used to cut out a 25 mm round sample from the animal‘s skin. The stainless steel (1,4404) cutter allows the sample to be cut out easily.

Supplier: BURKLE

Made of stainless steel or PP, transparent, sample bottles made of PE. The QuickPicker is appropriate when bulk goods are withdrawn directly from sacks, bags or open containers. The sample is filled directly into sample bottles. Sampling depth 300 mm, Ø 25 mm, length 500 mm, 75 ml volume.

Supplier: BURKLE

For sampling bulk goods, cross-sectional samples can be taken from different sample depths. Suitable for use with a range of sample substrates from fine powder to coarse grain. Multi sampler has three or five separate chambers for taking samples at multiple depths in one action. Uno sampler has one chamber for taking a sample at one specified depth. All layer sampler has no chambers, three or five inlets and this allows one sample to be taken at multiple depths. Jumbo sampler has no chambers and three, five or seven inlets; with a 50 mm tube diameter this is ideal for larger grain sizes and quantities.

Supplier: BURKLE

Very robust model with specially hardened forged drill bits. For determining soil properties, moisture and structure. The shape of the Mole‘s drill bits ensures minimum friction when drilling and removing the Mole from the ground.The Mole has different components. Handle with 75 cm rod, extension rod 100 cm if necessary and one of seven available drill bits, each of which is designed for a particular soil type. The components can be combined without any problems. Extension rods can extend the working depth of the Mole down to 5 m. Please order drill bits seperately.

Supplier: BURKLE

Sampler for deep-frozen products in the food and luxury items sector, and for semi-solid substances. The very robust hollow drill cuts quickly into the sample material with its sharp sawing crown. A sample cylinder (cross-section sample) can be cut out.

Supplier: BURKLE

Cylindrical hollow drill with a sharp cutting edge, can easily be driven into paste-like and semi-solid substances. The samples cut out are subsequently removed with the appropriate push-rod ejector.

Supplier: BURKLE

Guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the complete Spiralus has been filled. The shape of the sampling slits prevents seeds from being cut up. The Spiralus provides an excellent all-layer sample.

Supplier: BURKLE

Stainless steel AISI 316 L (1,4404). The MicroSampler has been specially designed for the sampling of small quantities of powder.