You searched for: Samplers

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: Avantor

Cycle-Tap sampler is a device for sampling small quantities of solvent.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: VWR Collection

SAS Super 100 and SAS Super 180 air samplers provide 100 or 180 litres per minute calibrated flow with real-time electronic control of actual air flow, according to EN 17025 specifications.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: VWR Collection

White PTFE ladle.

Supplier: BURKLE

Novartos Uno sampler with two or three sample chambers, for one sample zone.

Supplier: VWR Collection

The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.

Supplier: BURKLE

All parts coming into contact with the sample medium are made of pure white PTFE.

Supplier: SAMPLING SYSTEMS

Stainless steel cup samplers designed for liquids and suspensions.

Supplier: SAMPLING SYSTEMS

The TeleSwab has an extendable handle, which allows to take swabs from high and difficult to reach places.

Supplier: SAMPLING SYSTEMS

These triers are suitable for taking a large volume, cross sectional sample from a container.

Supplier: SAMPLING SYSTEMS

These disposable powder lances are designed for taking cross sectional samples through a bulk powder.

Supplier: SAMPLING SYSTEMS

These cross sectional multilevel disposable powder samplers are designed for powders. The robust HDPE construction make this to be used in huge number of testing applications.

Supplier: KARTELL

Gas collection bags made from latex.

Supplier: BURKLE

This MultiDispo zone samplers for taking samples from multiple layers of the sample material.

Supplier: BURKLE

The Vampire sampler can be used to take samples from liquids easily, even from deeper depths.

Supplier: BURKLE

The sample is directly extracted into the original sample bottle with screw cap.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: BURKLE

When bulk goods are transported, they may separate out and surface samples may not be representative. The sampler is opened manually once it has reached the required depth.

Supplier: BURKLE

These disposable samplers for the highest standards do not need to be cleaned after use.

Supplier: BURKLE

This ViscoDispo sampler is for highly viscous media up to 100 000 cP. The ergonomically shaped handle and stable drawbar make the sample easier to draw.

Supplier: BURKLE

Novartos is the pharmaceutical zone sampler for sampling in accordance with the FDA guidelines for unit dose sampling. With the Novartos pharmaceutical samplers, multiple individual dose samples (unit dose samples) can be taken from one or more sampling points in a single sampling.

Supplier: BURKLE

Hand operated vacuum pump sampler with a 2,5 metre long PVC hose, the stainless steel weight will sink the end of the hose to the required sampling depth.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

Quality assurance starts with the inspection of incoming goods. An all-layer sample of bulk goods is no longer a problem with PowderProof®, the sampler for powders and granules.