You searched for: Pumps

Supplier: BURKLE

Siphon pump in LDPE/PVC.

Supplier: Avantor Fluid Handling

Vary the speed of your DC motor with these controllers.

Supplier: Heidolph Instruments GmbH & Co.KG

SP vario pump head cover

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5001 and PD 5006 for standard applications. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there can be no contamination. Suitable for transporting high-viscosity media up to 10000 mPas. The pumps are self-priming, with no seals or valves. They can be used in the food industry for filtering and separating, for water treatment, in biotechnology, and for routine laboratory applications. Pressure and vacuum displacement possible. Maintenance free motors ensure long service life.

Supplier: Avantor Fluid Handling

Totally enclosed motors are ideal for dusty, dirty, or damp environments.

Supplier: Heidolph Instruments GmbH & Co.KG

Models PD 5201 and PD 5206 for advanced requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there is no contamination. Suitable for transporting highly viscous media up to 10000 mPas. The pumps are self-priming without seals or valves. Can be used in the food industry for filtering and separating, for water treatment, in biotechnology and routine laboratory applications. Media can be transported under pressure and under vacuum. Maintenance-free motors ensure long service life. Quantities displaced by the pump heads are stored in the program depending on the individual tubes used, and are shown in the digital display. Software may be ordered separately as an accessory. The pump drive is microprocessor-controlled. Equipped with RS232 digital interface; speed, metered quantity, flow rate, pause, and tube dimension can be controlled. Digital display of speed (min⁻¹) and flow rate (ml/min). Digital display of displacement volume (ml) in the case of volume metering. Intermittent metering is available with adjustable pause times. A metered volume can also be specified in addition to the flow rate display. Extremely simple calibration of displacement volume (ml) and flow rate (ml/min).

Supplier: Heidolph Instruments GmbH & Co.KG

Peristaltic pump heads SP standard 1,6 mm and SP standard 2,5 mm: For simple pumping tasks. Housing made from die-cast aluminium. Rollers made from stainless steel, roller bearings made from polyamide. Rotor equipped with 2 convex rollers; cell cultures will not be damaged. For tubing with wall thickness of 1,6 or 2,5 mm. Rated flow: 0,5 to 3644 ml/min (depending on the drive and tubing used).

Supplier: Avantor Fluid Handling

Make the most of your Masterflex drives replacement parts and other accessories.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Create your own motor mounting with the hardware below.

Supplier: Avantor Fluid Handling

Use with three-phase motors to create a variable-speed system.

Supplier: Avantor Fluid Handling

For Class 1 Group C and D, Class 2 Group F and G locations.

Supplier: Avantor Fluid Handling

Ideal for high humidity, wet environment, or high-pressure wash-down applications.

Supplier: Avantor Fluid Handling

Operate a 230-240 VAC motor with only a 115 VAC power supply.

Supplier: Avantor Fluid Handling

Mix, react, and/or separate liquid-liquid mixtures in a single device.

Supplier: Avantor Fluid Handling

Optimize performance of your Liquid-Solids Separator.

Supplier: Avantor Fluid Handling

Low-cost DC motors available in numerous configurations to meet your needs.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

CINC V2 Centrifugal Multipurpose Separator/Extractors

Supplier: GARDNER DENVER

Compact, dry-running, chemical resistant pump systems with a range of vacuum control options that plays an ideal solution for many applications in chemical laboratories and research.

Supplier: VWR Collection

The VWR® vacuum aspiration system is designed for laboratory waste recovery and the separation of liquids and solids.

Supplier: MILLIPORE

This peristaltic pump has polysulfone and steel pump head, stainless steel chassis and painted steel case.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: Avantor Fluid Handling

Proven design utilizes centrifugal action to remove and concentrate solids.

Supplier: MILLIPORE

Chemical Duty Pump Maintenance Kit

Supplier: MILLIPORE

Chemical Duty Pump Rebuild Kit

Supplier: MILLIPORE

The Chemical Duty Pump has a chemically-resistant head and diaphragm for use with corrosive chemicals and solvents.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: MILLIPORE

Millivac™ Mini vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.