You searched for: Cooling Circulators

Supplier: VWR Collection

Stainless steel baths with user friendly MX temperature controller plus three control buttons and on-screen prompts. Baths can be used for external closed loop circulation. The controller rests on a chemically resistant DuraTop™ deck, which is cool to the touch, even when working at high temperatures, and units feature LidDock™ lid stowing system. Cool Command™ technology regulates the amount of cooling required, saving energy while providing rapid cooling and precise control at elevated temperatures.

Supplier: VWR Collection

These circulating chillers are an environmentally friendly, water-conserving and reliable means of controlling the temperature of liquids in open tanks or closed loop systems. They provide high cooling performance at low cost. With a temperature range from −10 to +40 °C, they are ideally suited for many process and routine applications.

Supplier: VWR Collection

VWR® recirculating chillers are ideal for use with rotary evaporators, as they ensure constant, reproducible cooling conditions and avoid wasting tap water thereby increasing cost savings. Designed to be user friendly, the units have an easily accessible filling port on top of the unit and a drain tap at the back. The chillers have a stainless steel reservoir, operate using R134 refrigerant and can be used in the permitted ambient temperature range of 15 to 32 °C.

Supplier: VWR Collection

Stainless steel circulating baths with choice of Advanced Programmable or Advanced Digital temperature controller. Both are easy to navigate with large, intuitive displays and multiple communication options, including USB-A and B, RS232/485, Ethernet and external temperature probe. The reservoir drain can be accessed by removing the front panel. All models feature user-adjustable, high temperature safety cut-off points, as well as over-temperature protection. The surface is cool to the touch, even when operating at high temperatures.

Supplier: JULABO GMBH

Compact refrigerated/heating circulators which can be used on benchtop or in a fume hood, ideal for temperature control of distillation apparatus or mini plant installation. All four models feature pump connections for external temperature applications and a bath opening for temperature control of small objects directly in the circulator bath. The maximum ambient temperature of +40 °C and air cooled ventilation means the units can be positioned alongside other units or directly in a fume hood.

Supplier: JULABO GMBH

FD flow through coolers are used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GMBH

Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: JULABO GMBH

FT immersion coolers are primarily used for counter cooling when connected to a heating circulator, or for rapidly cooling fluids down to low temperatures. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: JULABO GMBH

The compact AWC100 air to water recirculating cooler is designed to remove small heat loads from external systems where cooling water can be above ambient and where temperature control is secondary. Coolers which do not have a refrigeration unit are ideal for use in circuits with Peltier elements, analytical devices, polarimeters, refractometers and CCD cameras. The ventilator speed (i.e. the cooling capacity) can be adjusted in two stages, cooling capacity depends on the temperature difference between return line temperature and ambient temperature. The cooling principle: Warm bath fluid is pumped through the heat exchanger. The heat exchanger is cooled by a ventilator motor and thus removes the produced heat.

Supplier: JULABO GMBH

Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GMBH

Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: LAUDA

Cooling thermostats with menu navigation in plain text for user friendly operation. Various interface modules are available as accessories. All models are available as air or water-cooled versions. They are similar in specifications with the ECO model thermostats, in addition these models comes with natural refrigerant.

Supplier: IKA JANKE KUNKEL

Designed for cooling applications up to −20 °C with a powerful 400 W cooling capacity, these recirculating chillers are highly efficient and provide stable temperatures. With a wireless controller, it is possible to operate the RC 2 safely and comfortably irrespective of where the device is located.

Supplier: VWR Collection

These benchtop chillers are environmentally friendly and economical alternatives to tap-water cooling.