You searched for: Labels

Supplier: VWR Collection

These label dot rolls are made from chemically-inert polyester with a unique adhesive formulated to adhere to laboratory glass and plasticware.

Supplier: VWR Collection

The labels and adhesive have been designed to withstand temperatures from –196 to +121 °C. VWR® labels are ideal for all cryostorage, and can also be used in most incubators.

Supplier: VWR Collection

These labels, made of PE film and with the GHS symbols, meet with GHS (Global Harmonised System) regulations for chemical substances and mixtures. These GHS symbols replaced traditional orange symbols (HSID) in 2015, when the pictogram on an orange square and R and S phrases disappeared. They are based on the physical, health and environmental risks posed by the substance.

Supplier: VWR Collection

PolarSafe Dots are made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware. These dots will not only withstand conventional freezing (−80 °C) but can also be used for most cryogenic storage applications (vapour phase nitrogen storage at −196 °C). No need for separate labelling solutions for your cryo-preservation units and your ultra low freezers. The labels can even be used in incubators. PolarSafe Dots do not require self lamination to be effective. The sleeker labels mean your tubes will still fit most storage systems without the label sticking or being torn off. The wide range of sizes allow you to label your whole experiment permanently, from micro-centrifuge tube to cryovial, microtiter plate to storage boxes.

Supplier: Avantor Fluid Handling

Colored tags make for quick and easy identification of process lines.

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: ITW-CONTAMINATION TEXWIPE

These autoclavable labels are made of a Teslin® material designed for label printing and can be used with most conventional inks.

Supplier: ITW-CONTAMINATION TEXWIPE

Cleanroom labels, direct thermal (1000/roll).

Supplier: ITW-CONTAMINATION TEXWIPE

Glossy cleanroom labels are designed for thermal transfer printing in a cleanroom environment. Available with two different adhesive levels to provide excellent adhesion to a variety of surfaces without leaving residue.

Supplier: ITW-CONTAMINATION TEXWIPE

Matte finish cleanroom labels provide excellent compatibility with cleanroom pens and thermal transfer inks. Available with two different adhesive levels to provide excellent adhesion to a variety of surfaces without leaving residue.

Supplier: BURKLE

These safety labels are used as originality seals and as protection from manipulations of e.g. samples, retention samples, for transporting samples, sealing containers with important or dangerous chemicals in the lab as well as sealing letters, shipments and much more. The initial opening of a package is made obvious and irrevocably visible with the seal guaranteeing originality, unauthorised opening can therefore be proven.

Supplier: Bel-Art Products, a Part of SP

The strong, permanent adhesive on these labels withstands cold storage temperatures and maintains adhesion to glass, plastic, cardboard and more, even in liquid nitrogen.

Supplier: BURKLE

Designed to seal the holes in sacks or boxes created when samples are taken, the strong adhesive on the 'close-it' label allows adhesion to surfaces that are slightly moist, frozen or coated with powder. The aluminium backing creates a vapour barrier and seals the container hermetically.

Supplier: BURKLE

Retention samples are kept to provide a sample for comparison at a later date. The unambiguous proof that the retention sample is identical to the original sample is only possible with clearly marked and sealed containers. However, sealing is frequently not possible unless eyelets are present. seal-it provides the solution! The seal-it self-adhesive label sticks to all conventional containers. Thanks to its unbelievable adhesive power it cannot be removed. If a container opening is closed with seal-it, then the container cannot be opened without destroying the seal-it label. seal-it is additionally provided with several cross-perforations which immediately tear when manipulated like a motorcar tax disc. seal-it can be used to securely seal bottles, sample bags, sacks, specimen bags, envelopes, and more.

Supplier: BURKLE

A control seal with an adhesive approved for use with foodstuffs. The strength of the adhesive is almost as powerful as that of the original. Just like the original, close-it food and pharma has a barrier layer of aluminium foil.

Supplier: BURKLE

Standard close-it and close-it food & pharma control seals are also available on a continuous roll. This offers the flexibility to provide a small length of tape to seal a small hole or to mark a specific point. Alternatively, longer pieces can be used to repair a long tear quickly, reliably and easily. With its extremely strong adhesive strength, close-it tapes adhere to a range of different surfaces, where the glue effect of normal adhesive tape quickly reaches its maximum capacity.

Supplier: KARTELL

Transparent, punched labels for use with wash bottles and plastic or glass reagent bottles.

Supplier: VWR Collection

Designed for use on test tubes, sample batches, or virtually any surface that requires labeling. Labels can also be used for date coding or personal identification.

Supplier: DIVERSIFIED BIOTECH

These Tough-Tags® polyester labels are specially top-coated to readily accept laser printing.

Supplier: Bel-Art Products, a Part of SP

Stick-on dots with the radiation symbol on yellow background, which enables easy labelling of radioactive vessels.

Supplier: DIVERSIFIED BIOTECH

These Cryo-Babies® and Cryo-Tags® polyolefin cryo-labels are specially top-coated to readily accept laser printing.

Supplier: VWR Collection

Tape labels are designed to aid in the identification of containers, shelves and other standard laboratory or workplace items.

Supplier: DIVERSIFIED BIOTECH

These Cryo-Tags® polyester labels work with most thermal transfer printers to print popular barcode formats for fast and easy sample identification.

Supplier: VWR Collection

These VWR® cryogenic labels are ideal for all cryostorage, liquid nitrogen, refrigeration and ultra-low temperature freezer applications.

Supplier: VWR Collection

Hazard warning labels are used to warn workers of hazardous conditions or materials.

Supplier: DIVERSIFIED BIOTECH

These Tough-Tags® polyester label rolls are pre-cut, peel-off labels which accept many marking instruments. They are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory.

Supplier: VWR Collection

This magnetic label material has a white vinyl surface that may be written on with wet-erase marker and then wiped off. Provided in a roll that may be cut to any size strip.

Supplier: VWR Collection

Labels aid in general workplace safety and efficiency by quickly and simply identifying contaminated equipment containers, rooms, or materials. A biohazard symbol along with the term are printed in bold black atop a fluorescent red background.

Supplier: DIVERSIFIED BIOTECH

These Cryo-Babies® and Cryo-Tags® PVC cryo label rolls are handwritable and available in three sizes.