You searched for: Stirring Tools

Supplier: VWR Collection

PTFE covered, rare earth magnetic core. For the removal of stirring magnets from vessels of all kinds.

Supplier: VWR Collection

PTFE covered, strong Alnico V magnetic core. For the removal of stirring magnets from vessels of all kinds.

Supplier: BURKLE

PP stirring paddles ideal for gentle stirring in plastic and glass containers.

Supplier: COWIE

Adjustable rotors made of PTFE with glass filled PTFE lock nut.

Supplier: DWK LIFE SCIENCES

DURAN®, clear borosilicate glass 3.3

Supplier: COWIE

Stirrer guide features composite PTFE/PEEK seal and a glass ball-bearing for rigidity and smoothness of operation.

Supplier: COWIE

PP covered, strong Alnico V magnetic core and hanging ring at one end. For the removal of stirrer magnets from vessels of all kinds.

Supplier: DWK LIFE SCIENCES

DURAN®, clear borosilicate glass 3.3.

Supplier: DWK LIFE SCIENCES

DURAN®, clear borosilicate glass 3.3.

Supplier: COWIE

PTFE, with encapsulated steel reinforced drive shaft. Chemically inert. The smooth surface reduces contamination and makes cleaning easier.

Supplier: DWK LIFE SCIENCES

DURAN®, clear borosilicate glass 3.3.

Supplier: IKA JANKE KUNKEL

These PTFE-coated retriever used for removing all stirring bars upto 80 mm in length.

Supplier: IKA JANKE KUNKEL

Made from stainless steel. Stirrers draw the material to be mixed from above. Minimal shearing forces.

Supplier: IKA JANKE KUNKEL

Made from stainless steel, except 441-2125, which is PTFE coated. Stirrers draw the material to be mixed from the top of the vessel to the bottom. Minimal shearing forces.

Supplier: IKA JANKE KUNKEL

Made from stainless steel. Gentle stirring with minimal turbulence.

Supplier: IKA JANKE KUNKEL

Made from stainless steel. Stirrers draw the material to be mixed from the top of the vessel to the bottom. Local shearing forces.

Supplier: IKA JANKE KUNKEL

Made from stainless steel. Stirrers draw the material to be mixed from the top and the bottom. High turbulence and high shearing forces.

Supplier: VITLAB

With PTFE encapsulated magnetic core. Straight shape. High chemical resistance, simple to clean.

Supplier: Heidolph Instruments GmbH & Co.KG

Chucks are designed for use with all RZR series overhead electronic stirrers.

Supplier: Heidolph Instruments GmbH & Co.KG

Made from stainless steel.

Supplier: COWIE

Rod baffles featuring a stainless steel core fully encapsulated in PTFE.

Supplier: COWIE

These retrivers are used for the removal of giant stirrer bars from vessels of all kinds.

Supplier: COWIE

Retrivers are used for the removal of stirrer magnets from vessels of all kinds.

Supplier: Heidolph Instruments GmbH & Co.KG

Made from stainless steel.

Supplier: KARTELL

Blades are made of PP, and are fixed to a PP covered steel rod.

Supplier: Bohlender

PTFE stirrers: These stirrer tools have a PTFE coated stainless steel shaft, and the U-shaped stirrer blade is made entirely of PTFE. Ideal for mixing viscous liquids. Strong, tangential flow with shear rate in the margin area, little sediment on the wall of the vessel.

Supplier: Heidolph Instruments GmbH & Co.KG

VISCO JET® homogenises low and high viscosity liquids in vessels by creating dynamic flow conditions by means of the so-called cone principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.

Supplier: KARTELL

PTFE coated stirring bar retrievers for removing magnetic stirrer bars from foodstuff.

Supplier: VITLAB

Flexible PTFE magnetic stirring bar retriever.