You searched for: Syringes for Chromatography

Supplier: VWR Collection

Super flexible plunger.

Supplier: VWR Collection

Standard micro syringes for GC with fixed needle.

Supplier: VWR Collection

Micro syringe with fixed needle for high sensitivity GC analysis and ultra-minute volumes.

Supplier: VWR Collection

Fine fixed needle, with special polished blunt tip, specific length and diameter, ensures a complete seal, preventing damage to needle seals and rotor.

Supplier: VWR Collection

Micro syringes without needle
General purpose Luer lock connector for use with autosamplers and liquid handling instruments. All parts in contact with sample are made from neutral borosilicate glass and PTFE. This provides excellent performance and an inert sample environment.

Supplier: HAMILTON BONADUZ

The Bubble Free Prime (BFP) syringe is specifically designed for the Microlab® 600 series and the only syringe type compatible with the instrument. It has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, TLL-SAL, Volume: 500 µl, Pk: 1

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

Developed specifically for the neurosciences, these syringes minimise injection site damage by increasing needle rigidity and delivering a micro volume of liquid to an exact location.

Supplier: HAMILTON BONADUZ

Super syringes with PTFE Luer lock (TLL) connector or tracheal adapter.

Supplier: HAMILTON BONADUZ

These syringes allow the collection, storage, transport and analysis of liquid or gaseous samples without the danger of evaporative loss or environmental contamination.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, GC, 1701 ASN, Volume: 10 µl, Type of tip: AS, Gauge: 23s-26s, Pk: 1

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

GC on-column syringes with three choices of needle: Stainless steel fixed (N), stainless steel removable (RN) or fused silica removable (RNFS).

Supplier: HAMILTON BONADUZ

NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

These HD headspace syringes feature a unique plunger designed specifically for the CTC PAL System COMBI xt® gas chromatography (GC) autosampler system. The High Dynamic (HD) plunger is optimised for high throughput and sets a new standard for headspace syringes.

Supplier: HAMILTON BONADUZ

Universal injection syringes for GC. Similar to the 700 series but with a reinforced, protected plunger.

Supplier: HAMILTON BONADUZ

These C-line syringes feature a direct attachment design of the needle to the barrel which eliminates contact between the sample solvent and adhesive, reducing carryover and ghost peaks. The inert plunger tip polymer provides enhanced solvent compatibility and longer lifetime.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: HAMILTON BONADUZ

Microsyringe pipettes with a special ³/₄" electrotapered needle for easy attachment of PTFE tips. The sample only wets the disposable PTFE tips, eliminating sample cross-contamination.

Supplier: HAMILTON BONADUZ

Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.