You searched for: Environmental Test Kits

Supplier: HACH

These 'Test N Tube' kits are used for the determination of nitrite by the diazotisation method.

Supplier: HACH

Qualitative results using traditional colour comparator disc methods.

Supplier: HACH

Test kit suitable to detect the presence of iron and manganese in cases of stained laundry.

Supplier: HACH

Qualitative results using traditional colour comparator disc methods.

Supplier: HACH

Reagents for photometric analysis either in field conditions or in the laboratory.

Supplier: HACH

Set used for determination of reactive phosphorus (ortho-phosphate) by the molybdovanadate Test 'N Tube™ method.

Supplier: HACH

Caused by the presence of carbonates, bicarbonates, hydroxides, and other dissolved salts, alkalinity is important to food and beverage processors, boiler operators, and aquatic biologists.

Supplier: HACH

Molybdates are used to inhibit corrosion in industrial and utility water systems. The reagents in the kit reacts with molybdate to form a blue colour, which is measured with a colour disc.

Supplier: HACH

Test kit, Silica reagent 3

Supplier: HACH

Test kit, Phosphate 2 reagent, Range: 0 - 4,5 mg/l

Supplier: HACH

Test kit, Cyanide (CyaniVer 4), Range: 0,002 - 0,240 mg/l

Supplier: HACH

Test kit, Nickel, Range: 0,007 - 1,000 Ni mg/l, For unit: DR 2800, DR 4000, DR 5000

Supplier: HACH

Buffered dilution water required for testing recreational, drinking and wastewater.

Supplier: HACH

Determination of high range phosphate (phosphorus) by the amino acid method.

Supplier: HACH

For determination of high range molybdenum by the mercaptoacetic acid method.

Supplier: HACH

Simple, economical rapid colour disc method with an easy to carry test kit.

Supplier: HACH

The kit uses the colour disc or ferrous sulphate method to measure nitrogen as nitrite NO²⁻.

Supplier: HACH

Reagent set used for determination of manganese by the PAN method.

Supplier: HACH

Simple, low cost colour disc method of testing nitrate-nitrite.

Supplier: HACH

This set is used for the determination of acidity by digital titrator titration with methyl orange and phenolpthalein end points.

Supplier: HACH

Test kit used to measures 10 critical parameters with digital titrator, drop count, and colour discs. It is suitable for use in saltwater aquaculture applications.

Supplier: HACH

These are used for determination of Ultra Low Range silica by the Heteropoly Blue Rapid Liquid method. Rapid Liquid™ methods offer an economical way to analyse multiple samples and to measure trace concentrations.

Supplier: HACH

Proper maintenance and economy of operation of modern boilers and cooling towers require a careful balance between water quality parameters and treatment chemicals. This kit measures hydrazine, a common oxygen scavenger in boiler water, using the simple colour disc method.

Supplier: HACH

Used for determination of Total Organic Carbon (TOC) either by low range, mid range or high range test 'N Tube' method respectively. The set includes digestion vials and reagents for 25 to 50 tests.

Supplier: HACH

Ethylene glycol (anti-freeze) contamination of automotive lubricants is an indication of a cracked engine block. Glycol presence also can indicate leaks in cooling systems. This test kit model EG-1 presents a purple colour if ethylene glycol and other 1,2 glycols are present in oil or water.

Supplier: HACH

It is a simple, economical colour disc kit to determine the presence of detergents in surface or ground waters which indicates industrial or domestic pollution. In natural waters anionic LAS and ABS detergents cause excessive foaming, promote growth of disease producing organisms and tend to kill aquatic life. This kit achieves fast results with an portable test kit.

Supplier: HACH

This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the small boiler operator who needs to monitor alkalinity (5 to 400 mg/L), chloride (5 to 400 mg/L), hardness (0 to 2500 mg/L), iron (0 to 4 mg/L), and pH (4 to 10).

Supplier: HACH

SPADNS fluoride reagent solution is used for determination of fluoride.

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: MILLIPORE

Test kit, Naval fluid colour guide