Supplier: HACH

Simple to handle test strips give an overview of the water quality in just a few seconds. In the laboratory the strips can be used as an initial screening to indicate measuring range or potential problems.

Supplier: HACH

This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the operation of modern boilers and cooling towers.

Supplier: HACH

A stabilising agent for chlorine, cyanuric acid is used in swimming pool treatment. Cyanuric acid test kit measures the turbidity formed in proportion to cyanuric acid concentration, after the reagent is added.

Supplier: HACH

For total hardness determination by EDTA digital titrator titration with calmagite indicator.

Supplier: Lovibond

Highly sensitive and precise COD testing of water with minimum effort.

Supplier: HACH

OS-1 Kit provides proper maintenance and economy of operation of modern boilers and cooling towers which requires balance between water quality parameters and treatment chemicals. It measures common corrosion and biological growth inhibitor using simple color disc method.

Supplier: HACH

Test kit, Hardness 1 buffer solution

Supplier: HACH

Test kit, Manganese, Range: 0,1 - 20,00 mg/l

Supplier: HACH

Test kit, Hardness 2 indicator solution, 100 mL MDB

Supplier: HACH

For determination of trace levels of iron by the Ferrozine method.

Supplier: HACH

Digital titration provides a more precise and accurate method than the drop test method.

Supplier: HACH

Glycine reagent for Hach chlorine dioxide determination by DPD/glycine methods.

Supplier: HACH

Designed to analyse tannin and lignin together and report result as mg/l tannic acid.

Supplier: HACH

This chlorine reagent set has 100 tests each to test chlorine (free and total) by DPD colorimetic method.

Supplier: HACH

Tests for all water analysis applications. The cuvette is a closed sytem which is safe for the user and the environment.

Supplier: HACH

The test kit is suitable for measuring the effectiveness of cyanide removal from waste effluents of metal-cleaning and electroplating baths and various other chemical processes through alkaline or neutral chlorination procedures. Not suitable for complexed cyanides.

Supplier: HACH

Prepared COD reagents eliminate the need for measurement of corrosive and toxic chemicals. Just add sample to the COD vial, digest and measure. Photometric measurements provide accurate results without the equipment and effort required for titrations.

Supplier: HACH

Test kit, Cyanuric acid , Range: 5 - 50  mg/l

Supplier: HACH

Test kit, Indicator for chlorine (total) for use with CL17

Supplier: HACH

Glutaraldehyde test kits are designed to monitor disinfection processes.

Supplier: HACH

Simple, economical, rapid visual colour determination.

Supplier: HACH

For ultra-low total chlorine determination by the DPD method.

Supplier: HACH

Simple, low cost, portable, colour disc method of testing nitrate.

Supplier: HACH

For total nitrogen determination by the persulphate digestion method.

Supplier: HACH

This solution is used for Aluminum determination by the Eriochrome Cyanine R Method.

Supplier: HACH

The accurate visual test kit method to determine nitrogen as nitrite by diazotisation of sample followed by colour comparison.

Supplier: HACH

For determination of nitrogen-nitrate by the cadmium reduction method.

Supplier: HACH

Oxidation-reduction indicator for the analysis of BOD, total chlorine, chromium, cyanide, dissolved oxygen and sulfite.

Supplier: HACH

Simple, economical, rapid colour disc methods for testing ammonia in freshwater or salt water.

Supplier: HACH

Pre-dosed reagents for maximum safety.