You searched for: Environmental Test Kits

Supplier: HACH

A multi-parameter test kit for hardness, iron and pH, which provides an easy-to-use, cost effective way to determine the quality of water.

Supplier: HACH

Uses simple, fast colour disc and drop count methods to measure carbon dioxide, dissolved oxygen, and pH for applications in water ecology

Supplier: HACH

Ammonia (Nitrogen) is a product of microbiological decay of plant and animal protein. Its presence in raw surface waters usually indicates domestic or agricultural pollution. Above certain levels, it is toxic to fish.

Supplier: HACH

Test kit, Amino acid reagent for phosphate determination

Supplier: HACH

Test kit, Iron (FerroVer®), Range: 0 - 10  mg/l

Supplier: HACH

Test kit, Copper, Range: 0,04 - 5,00 mg/l

Supplier: HACH

Test kit, EDTA standard solution, 0,0200 N, 1 l, for hardness determination by buret titration

Supplier: HACH

Used for sulphide determination by the methylene blue method.

Supplier: HACH

Qualitative results using traditional colour comparator disc methods.

Supplier: HACH

5-in-1 test strips are multi-parameter test strips test offering five water quality measurements on 1 strip.

Supplier: HACH

Simple, economical rapid colour disc method with an easy to carry test kit.

Supplier: HACH

This kit provides measurement of ortho- (reactive) and meta- (condensed) phosphate (requires hot acid digestion).

Supplier: HACH

Test kit, Molybdenum HR, Range: 0,3 - 40 mg/l, For unit: DR 6000, DR 5000, DR 3900 DR 3800, DR 2800, DR 2700, DR 1900

Supplier: HACH

One unit each of the reagents is sufficient for 30 days of operation. The standard solution is sufficient for ten calibrations.

Supplier: HACH

Simple to handle test strips give an overview of the water quality in just a few seconds. In the laboratory the strips can be used as an initial screening to indicate measuring range or potential problems.

Supplier: HACH

A stabilising agent for chlorine, cyanuric acid is used in swimming pool treatment. Cyanuric acid test kit measures the turbidity formed in proportion to cyanuric acid concentration, after the reagent is added.

Supplier: HACH

For total hardness determination by EDTA digital titrator titration with calmagite indicator.

Supplier: Lovibond

Highly sensitive and precise COD testing of water with minimum effort.

Supplier: HACH

Test kit, Hardness 1 buffer solution

Supplier: HACH

Test kit, Manganese, Range: 0,1 - 20,00 mg/l

Supplier: HACH

Test kit, Hardness 2 indicator solution, 100 mL MDB

Supplier: HACH

For determination of trace levels of iron by the Ferrozine method.

Supplier: HACH

Digital titration provides a more precise and accurate method than the drop test method.

Supplier: HACH

Glycine reagent for Hach chlorine dioxide determination by DPD/glycine methods.

Supplier: HACH

Designed to analyse tannin and lignin together and report result as mg/l tannic acid.

Supplier: HACH

This chlorine reagent set has 100 tests each to test chlorine (free and total) by DPD colorimetic method.

Supplier: HACH

Tests for all water analysis applications. The cuvette is a closed sytem which is safe for the user and the environment.

Supplier: HACH

The test kit is suitable for measuring the effectiveness of cyanide removal from waste effluents of metal-cleaning and electroplating baths and various other chemical processes through alkaline or neutral chlorination procedures. Not suitable for complexed cyanides.

Supplier: HACH

Prepared COD reagents eliminate the need for measurement of corrosive and toxic chemicals. Just add sample to the COD vial, digest and measure. Photometric measurements provide accurate results without the equipment and effort required for titrations.

Supplier: HACH

Test kit, Cyanuric acid , Range: 5 - 50  mg/l