You searched for: Samplers

Supplier: BURKLE

When bulk goods are transported, they may separate out and surface samples may not be representative. The sampler is opened manually once it has reached the required depth.

Supplier: BURKLE

Stainless steel construction. Developed for sampling milk powder. The collector is inserted into bags or casks and the sample is removed using a half-shell shaped lance. Insertion depth 385 mm, total length 480 mm, ext.Ø approximately 28 mm.

Supplier: BURKLE

Material: V4A stainless steel (1.4404). Sampler for thin to viscous liquids.

Supplier: BURKLE

Glass bottle and hose are connected in such a way that they conduct electricity and are grounded via a grounding cable. Operation: Ground the device, immerse the suction hose to the required depth, attach the adapter to the sampling bottle, generate a vacuum with the manual pump and collect the sample, remove the filled sampling bottle, close it and label it.

Supplier: BURKLE

Hand operated vacuum pump sampler with a 2,5 metre long PVC hose, the stainless steel weight will sink the end of the hose to the required sampling depth.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

Samplers available in three sizes.

Supplier: BURKLE

Disposable ZoneDispo samplers for pourable bulk goods up to 2 mm particle size.

Supplier: BURKLE

Novartos is the pharmaceutical zone sampler for sampling in accordance with the FDA guidelines for unit dose sampling. With the Novartos pharmaceutical samplers, multiple individual dose samples (unit dose samples) can be taken from one or more sampling points in a single sampling.

Supplier: BURKLE

GeoSampler is specially designed for soil sampling.

Supplier: BURKLE

Cleaning reusable samplers is a demanding and often complicated task, with greasy, strongly adhesive or toxic substances. An ergonomic handle makes it easier to draw the sample as with a syringe.

Supplier: BURKLE

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.

Supplier: BURKLE

Stainless steel sampler for powders. The conical inlet allows for collection of different sample sizes, up to approximately 50 ml. Constructed without edges, grooves or crevices for easy cleaning. The sample is collected directly into the sampling bag which is held in place with the included clamp. StickProof borehole diameter 25 mm; chamber length 120 mm. Sampling bags: 170×120 mm for 400 ml.

Supplier: BURKLE

Disposable sampler for the highest standard in sampling unlike conventional reusable samplers, disposable samplers do not need to be cleaned after use. Simple disposable sampler for taking samples of low viscosity media. Cleaning reusable samplers is a demanding and often complicated task with greasy toxic substances. Sometimes the task is even impossible. Cross contamination is completely eliminated. It has two opening sizes (2,5/5,5 mm) for different viscosities.

Supplier: BURKLE

Pigment lance to sample pigments, pastes and agglomerating bulk goods.

Supplier: BURKLE

Sampler for free flowing bulk goods up to approx. 10 mm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.

Supplier: BURKLE

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask.

Supplier: SAMPLING SYSTEMS

These disposable powder lances are designed for taking cross sectional samples through a bulk powder.

Supplier: BURKLE

Completely made from non spark-producing materials, nickel plated.

Supplier: BURKLE

For sampling bulk goods, cross-sectional samples can be taken from different sample depths. Suitable for use with a range of sample substrates from fine powder to coarse grain. Multi sampler has three or five separate chambers for taking samples at multiple depths in one action. Uno sampler has one chamber for taking a sample at one specified depth. All layer sampler has no chambers, three or five inlets and this allows one sample to be taken at multiple depths. Jumbo sampler has no chambers and three, five or seven inlets; with a 50 mm tube diameter this is ideal for larger grain sizes and quantities.

Supplier: BURKLE

Suction samplers for viscous media such as paste, sludge, cream, or oil.

Supplier: BURKLE

Guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the complete Spiralus has been filled. The shape of the sampling slits prevents seeds from being cut up. The Spiralus provides an excellent all-layer sample.

Supplier: BURKLE

This disposable TargetDispo sampler is to take a target point sample at a position in the sample material that has previously been precisely determined. Sampler is closed while it pierces into the powder or granulate, when it reaches the sample removal point it is opened and then closed again, in this way a precise target-point sample is obtained.

Supplier: BURKLE

Very robust model with specially hardened forged drill bits. For determining soil properties, moisture and structure. The shape of the Mole‘s drill bits ensures minimum friction when drilling and removing the Mole from the ground.The Mole has different components. Handle with 75 cm rod, extension rod 100 cm if necessary and one of seven available drill bits, each of which is designed for a particular soil type. The components can be combined without any problems. Extension rods can extend the working depth of the Mole down to 5 m. Please order drill bits seperately.

Supplier: BURKLE

The sample liquid only comes into contact with the suction hose and the original sample bottle. Cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed.
● PE MiniSampler for general sampling
● PTFE MiniSampler for ultra-pure sampling

Supplier: BURKLE

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.

Supplier: KARTELL

Gas collection bags made from latex.

Supplier: BURKLE

ProfiSampler, the vacuum-operated sample collector for robust industrial use.

Supplier: BURKLE

Complete handy set combining the LiquiSampler and the ViscoSampler with practical accessories.

Supplier: BURKLE

Stainless steel AISI 316 L (1,4404). The MicroSampler has been specially designed for the sampling of small quantities of powder.