1059 Results for: "VACUUBRAND"

Supplier: VACUUBRAND

These flanges are made from aluminium or plastic.

Supplier: VACUUBRAND

Centering with external centering rings is effected on the external diameter of the small flange, the O-ring seal is pressed into an internal radius.

Supplier: VACUUBRAND

Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: VACUUBRAND

For securing and mechanical pressing of O-ring seals. Aluminium or stainless steel, non rusting.

Supplier: VACUUBRAND

These diaphragm pumps combine modern control electronics and software with powerful mechanical components. They control the vacuum with pinpoint precision by adjusting the speed of the pump; they enable automatic vapour pressure detection and the automatic adaptation of the vacuum level to the course of the process. The fast, adaptive control provides the appropriate flow rate for every task, regardless of the size of the equipment or the volume of gas. All VARIO diaphragm pumps comprise the pump, the vacuum controller with display and the vacuum sensor.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Chemistry diaphragm pumps of the NT design are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms for increased reliability and extended operating life. The eight cylinders pump ME 16C NT provides a particularly high performance together with a compact design. Upgraded with an outlet exhaust vapor condenser (EK) the ME 16C NT +EK provides an environmental friendly system with efficient solvent recovery. Eight-cylinder NT pumps feature quiet operation, smooth and easy to clean surfaces.

Supplier: VACUUBRAND

Rotary vane pumps from VACUUBRAND offer great performance in a compact design. Even with the gas ballast open, they enable a very good ultimate vacuum. You also benefit from extended oil change and maintenance intervals thanks to optimised lubrication circuit and large usable oil volume.

Supplier: VACUUBRAND

Maintenance kit RE/RZ 2,5 and RE/RZ 6

Supplier: VACUUBRAND

VACUUBRAND VARIO® technology - frees you up for other tasks. The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry diaphragm pumps to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These small flanges made of stainless steel.

Supplier: VACUUBRAND

Metal bellows with small flanges made of stainless steel.

Supplier: VACUUBRAND

This four-stage chemistry-design diaphragm pump is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0,9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry diaphragm pumps to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: VACUUBRAND

Oil mist filter outlet side FO R 2/2,5/5/6, For: RE 2, RZ 2, RE 2,5, RZ 2,5, RE 5, RZ 5, RE 6, RZ 6

Supplier: VACUUBRAND

PTFE vacuum hose is antistatic. The inner side of the PTFE hose is smooth for increased chemical resistance, reduced deposits, and high conductance.

Supplier: VACUUBRAND

Rubber.

Supplier: VACUUBRAND

High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND

These small flanges with thread made of stainless steel.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Chemistry hybrid pump, RC 6

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: VACUUBRAND

These high vacuum pumping units are highly uselful in successful and time-saving work in many science laboratories. The powerful rotary vane backing pumps generate the necessary backing pressure so that the diffusion pump can always attain its full pumping speed and an ultimate vacuum of approx. 10^-6 mbar (measured with pump fluid DC 704 and cold trap with liquid nitrogen). The pumping unit HP 40B2 with RZ 6 provides higher pumping speed in the pump down phase and is additionally equipped with an oil mist filter FO.

Supplier: VACUUBRAND

This very compact chemistry pumping unit is an excellent solution when working with high boiling solvents. Typical applications are vacuum generation for rotary evaporators, vacuum concentrators and filtrations. With the continuously variable jog wheel, the pumping speed is manually adjustable to the process requirements. There are two optional kits available to easily upgrade the PC 3001 basic to the fully functional PC 3001 VARIOpro complete with CVC 3000 vacuum controller, inlet separator and vapor condenser at the outlet (please contact Avantor for further information).

Supplier: VACUUBRAND

These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Supplier: VACUUBRAND

Conversion kit for remote pump control with CVC 3000